Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

Kirby ultimate G .accessory lock is striped. Can that be replaced?

\015 Kirby ultimate G My belt broke & sucked into my sweeper & got stuck. My husband had to take it a part, he go out the belt but the accessory lock now is striped. Can that be replaced? have you ever heard of this?\015

Answers :

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=559479
\015\012Kirby ultimate G .accessory lock is striped. Can...
\015\012Posted by goulds5 on Apr 30, 2008
\015\012Kirby ultimate G My belt broke & sucked into my sweeper & got stuck. My husband had to take it a part, he go out the belt but the accessory lock now is striped. Can that be replaced? Have you ever heard of this?
\015\012
\015\012Hello,
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. Yes, the accessory lock can be replaced but it may be part of the actual vacuum head of which could be expensive, it may be molded onto the vacuum head and would be replaced. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://kirby.com/ Customer Service – United States & Canada 1-800-494-8586
\015\012Hours 8:00 am to 5:00 pm (EST) U.S. & Canada Fax # 1 (216) 529-6146
\015\012Mail To:
\015\012Consumer Relations
\015\012The Kirby Company
\015\0121920 West 114 Street
\015\012Cleveland, OH 44102
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.

\015\012
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby ultimate G .accessory lock is striped. Can that be replaced?


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=11557&thid=559479\015\012Kirby ultimate G .accessory lock is striped. Can...\015\012Posted by goulds5 on Apr 30, 2008\0 ... Kirby Ultimate G Bagged Upright Vacuum

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

How to replace a fuse a Kirby Ultimate G Series


There is no fuse in the Kirby. There are few things that you want to check:1. Cord - most likely cause. It may not be damaged but wires inside may have snapped if it got between doors.2. Safety switch inside - no easy way to check. We usu ... Kirby Heritage II Vacuum

How to test and or replace on/off switch on a kirby ultimate G


See the instructions how to replace the on/off switch:\015\012http://www.goodvac.com/kb_results.asp?ID=18\015\012\015\012If you need any parts ... Kirby Ultimate G Bagged Upright Vacuum

Need info on replacing on/off switch - Kirby Ultimate G Bagged Upright Vacuum


Here's my free online guide to replacing the power switch....\015\012\015\012http://revie ... Kirby Ultimate G Bagged Upright Vacuum

How do i replace the band - Kirby Shampooer Shampoo Hose G3 Ultimate Diamond Vacuum


Hello,Please see the instructional video hereGood Luck,Rocky ... Kirby Shampooer Shampoo Hose G3 Ultimate Diamond Vacuum

I have a ultimate g kirby and I am trying to replace a broken belt with no clue. Can you talk me thru it?


Here is a video walking you through this as well.\012 ... Kirby Ultimate G Bagged Upright Vacuum

Kirby Vacuum Hi Bruce, In my opinion, yes the Kirby would be worth it, as long as you are not replacing the motor. The switch would be the most expensive part besides the motor that would need to be replaced. The switch costs USD 49.99, the cord is roughly $39.99, and the carbon brushes are $29.99. I can easily walk you through any of these repairs should you need help. Kirby's are great vacuum cleaners, that usually last 30+ years. Brand new these machines sell in the US for $1600 or more,


You can get better prices from Goodvac.com ... Kirby Generation 3 Bagged Upright Vacuum

Handle on kirby ultimate g won't stay upright


Just take the handle off, rermove the 2 screws on the front of the cover, remove the plastic piece on the back of the top, then remove the 2 screws and the top cover will come off. There are 2 screws holding the handle pivot on, remove those. Insta ... Kirby Ultimate G Bagged Upright Vacuum

How do you change the off swith in the Kirby ultimate G


First Thing to check is, Is it the pedal or the actuall switch.. the main switch is on the motor up under the cover and on the side\015\012it is a pain to get to and even worse to change out.\015\012most of the time it is the pedal that i ... Kirby Ultimate G Bagged Upright Vacuum

How much does kirby ultimate G weigh? - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

Kirby ultimate g handle staying upright


Please see my online guide for replacing the power switch. It will get you into the case. Just use this link....\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Belt replacement i am trying to replace the belt on my kirby g4 and i can not get the rooler off to replace the belt. if you could tell me how to do this it would be great.


Lift the light bulb housing up and you will find a latch that will rotate to release the front agitator housing and remove it from the machine. On the bottom of that housing, there are two latches that secure the bottom plate that covers the roller. ... Kirby G4 Bagged Upright Vacuum

It's been awhile since I have used my shampoo system on my Ultimate G series Kirby. Well, as instructed I took it apart and cleaned it. Now I can?t figure out where to put the ?screen cap? and ?sponge filter?. I have my manual in front of me and the only place it shows the filter and sponge (page 35 in the manual) is when it?s been taken apart to clean. It doesn?t show where to put it back. I don?t know what I would do without all the pictures in the Kirby manual. HELP! Thanx. Visual Kirby Vacuu


Hello,\015\012The littlew round screen goes in the hole where the hose attaches to the tank. The round foam filter goes up in the hole underneath the on/off valve for the foam. Here is a guide if you need any more help...\015\012\01 ... Kirby G6 Bagged Upright Vacuum

Fan and bearing replacement on a Kirby G6


If you run your vac to long after the fan is broke it will cause excessive vibration and the bearings can go out. in almost all cases i replace the fan only. most of the time if you have a bad bearing the vac will make a grinding noise. you can also ... Kirby G6 Bagged Upright Vacuum

Kirby Tradition Just got a Kirby Tradition at our local auction - 26 pounds! It has 4 boxes of accessories but NO manual! Any idea where I can get a manual or help to identify the parts and what they do!! Thanks.


See thishttp://www.goodvac.com/articles.asp?id=135this is for newer models but principal is all the same.Rocky ... Hoover F7431-900 SteamVac Vacuum

New Kirby I own the new Kirby Ultimate Diamond Edition..G Series and the brushes are running OK and everything but it seems to be blowing things out and not picking them up. Can you help me. My serial number if 7051201028


Is the bag emptor all of the way on? It will blow out if it isn't, But being new, you must have a number to call, it is under warranty so they should be able to help you out. ... Kirby G5 Bagged Upright Vacuum

How do i use the kirby shampooer - Kirby Ultimate G Bagged Upright Vacuum


Hi,\015\012I'ts a little fiddly - but pretty good when it gets going.\015\012Remove bag from bottom connection by swinging outwards untill it clicks - then remove upwards. Unclip at the top also.\015\012Undo belt by rotating centre ... Kirby Ultimate G Bagged Upright Vacuum

Tray wont stay connected to kirby - Kirby Ultimate G Bagged Upright Vacuum


Here is a guide for the shampooer...follow it exactly and it should help. Please remember to rate it if it's helpful! :0)\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

My kirby won't turn on - Kirby Ultimate G Bagged Upright Vacuum


Check your cord,maybe you have to replace it,they do sale replacements. ... Kirby Ultimate G Bagged Upright Vacuum

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

Kirby My Kirby is less than a year old.  It's suction is no longer strong. I tried cleaning the hose and even replacing the bag.  Do you have any other suggestions.  By the way, I have the Sentera model.  Thank You


Here is a link to my online troubleshooting guide. Hope it helps...\015\012\015\012http://r ... Kirby Generation 3 Bagged Upright Vacuum

Replacing propeller Kirby G5: ordered a new propeller and can't seem to open up the unit to replace it. We've found all of the screws (we believe). Are we missing something?


This will help you out tremendously...\015\012\015\012http://reviews.ebay.com/KIRBY-VACUUM-RE ... Kirby G5 Bagged Upright Vacuum

Kirby belt my belt on my kirby ultimate g came off and I can't figure out how to get it back on please help!


Check out my online guide. I also have instruction manuals!\015\012\015\012http://reviews.e ... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0436 seconds