Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

Handle on kirby ultimate g won't stay upright

\015 I thought your guide was great and I would like to get my replacement parts from you, but I didn't see it on the e-bay web site store. I think I need a new pivot assembly switch which is what the handle plugs into. the handle just kind of flops around and frequently tips the whole vacuum cleaner over. I think the switch needs replacing. I can get the part but how difficult is it to crack the case and fix this? I noticed that it looks like I'll need hex wrenches to crack the case. I just don't want to get into the middle of something if it's something I can't or won't be able to handle. thank you.'\015\012nancy s.\015

Answers :

Just take the handle off, rermove the 2 screws on the front of the cover, remove the plastic piece on the back of the top, then remove the 2 screws and the top cover will come off. There are 2 screws holding the handle pivot on, remove those. Install the new pivot making sure that it alines with the transmissing on the left side, re-install the 2 screws and make sure they are tight. Then put the rest back together.
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kirby ultimate g handle staying upright


Please see my online guide for replacing the power switch. It will get you into the case. Just use this link....\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Tray wont stay connected to kirby - Kirby Ultimate G Bagged Upright Vacuum


Here is a guide for the shampooer...follow it exactly and it should help. Please remember to rate it if it's helpful! :0)\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Handle on kirby ultimate g won't stay upright


Just take the handle off, rermove the 2 screws on the front of the cover, remove the plastic piece on the back of the top, then remove the 2 screws and the top cover will come off. There are 2 screws holding the handle pivot on, remove those. Insta ... Kirby Ultimate G Bagged Upright Vacuum

Kirby heritage 2 handle wont stay in the upright posision keeps falling backwards


Two things; your bag may be too full and needs replaced. (it doesn't take much to make them top-heavy) or the pin at the back of the base of the handle is not extended. ... Kirby Heritage II Vacuum

I have a Kirby Heritage Vacuum Cleaner. Recently the handle fell backwords. I took the pin to the handle out and replaced it. It helped some, but the handle does not stay upright.


... Kirby Ultimate G Bagged Upright Vacuum

Regarding my Kirby Generation 3 upright vacuum cleaner: the handle does not lock into place, but rather falls to the floor. Any thoughts on how to get it to stay in place? Also, I lost my owner/operator manual. Can I download one to learn how to clean and maintain the vacuum?


The plate that catches the handle to lock has a hidden spring behind that plate.I would leave it alone for the unit is pressed together. Used ones are found most everyday on Ebay. The owners manual maybe found on this website\015\012\015\ ... Kirby Generation 3 Bagged Upright Vacuum

Want stay running after pushing on button - Kirby Ultimate G Bagged Upright Vacuum


I'd say it's either the cord or the power switch with the switch being my first guess. Here's my free online guide for the do-it-youself repairman...\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Handle won't stay upright


G3 has a handle return spring. Check to see if it is properly tensioned or broken ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

How much does kirby ultimate G weigh? - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

My Oreck Upright will not stay upright! The handle falls over everytime I leave it stand on its own.


What you are in need of is what they call a detent. There is a possibility that is has broken off from the housing which means that the only way to repair it properly is to replace the entire housing. It may have just had the screw come loose and h ... Oreck XL® Classic Bagged Upright Vacuum

Handle wont go to upright position


The red pedal has slipped out of position. On both ends of the red pedal you'll see metal rods (the axel of the pedal). On one side you'll see the metal rod sits into a long groove, on the other side you'll see the metal rod sits into a round hole. T ... Dyson DC25 All Floors Bagless Upright Vacuum

DC 17 UPRIGHT BRUSH MOTOR WONT STAY RUNNING. TURN


Have a look at the filters first as it sounds like you blokeage ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Handle will not stay upright


... Kirby Generation 3 Bagged Upright Vacuum

My kirby won't turn on - Kirby Ultimate G Bagged Upright Vacuum


Check your cord,maybe you have to replace it,they do sale replacements. ... Kirby Ultimate G Bagged Upright Vacuum

My Dyson DC17 Animal Bagless Upright does not click to stay in an upright position. It works but the handle falls to the floor.


This is a common fault with the Dyson DC07 (and other Dysons) unfortunately the clip that holds the handle upright hs broken. It can be repaired, but will cost a reasonable amount to have done... I would just live with the problem and prop the vacuum ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My kirby will not turn on - Kirby Ultimate G Bagged Upright Vacuum


YOU NEED TO CHECK THE WIRE, SAFETY SWITCHES & POWER SWITCH, ONE OF THEM HAVE PROBLEM ... Kirby Ultimate G Bagged Upright Vacuum

My kirby will not turn on - Kirby Ultimate G Bagged Upright Vacuum


The kirby won't trun on if everything is not completely in place all the way. Check the vacuum bag position (the outer bag), make sure it is clicked in on the bottom, also check that the head of the vacuum is installed properly. Check your power uppl ... Kirby Ultimate G Bagged Upright Vacuum

Roller doesnt spin on my kirby g series - Kirby Ultimate G Bagged Upright Vacuum


That means that the belt is stretched or broken. You need to replace it. You can get replacement belts here:Kirby Ultimate G Belts ... Kirby Ultimate G Bagged Upright Vacuum

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

Bissell 6590 the part I am trying to replace allows you to lower the handle to lay flat to get under furniture and it also allows the handle to stay in the upright postion. i have looked on bissell.com and did not find it-but I will try again. you are super and Thanks allot . Have a super easy day! Michele


It is called the detent lever part # 2030052. If you can't order it from bissell.com or over the phone, most repair shops should be able to order it for you. ... Bissell 6590 CleanView Bagless Upright Vacuum

I need a manual for Kirby G7D vacuum. - Kirby Ultimate G Bagged Upright Vacuum


Hello,you can order one on our website: http://www.goodvac.com/Kirby_Ultimate_G_manual_p/k-sup-mnl-260001.htmG ... Kirby Ultimate G Bagged Upright Vacuum

Setting up to shampoo carpets with a Kirby - Kirby Ultimate G Bagged Upright Vacuum


Greetings from GoVacuum,Here's an easy to understand and follow video review on how to attach the carpet shampooer to the Kirby Generation 6 (G6). The ... Kirby Ultimate G Bagged Upright Vacuum

I just bought a 2nd hand Kirby & not really know how to start. it didn't come with any operation Manual or CD. I realized its a re-po set. I think its Kirby Ultimate G Bagged Upright Vacuum, as there is nothing to identify it.


Here's a free guide for the shampoo system and I have both book and DVD manuals available for purchase. Hope i've helped...\015\012\015\012 ... Kirby Ultimate G Bagged Upright Vacuum

Telescopic handle I don't think I have the exact same vacuum, although mine is a fantom upright bagless. I can't get the telescopic handle to stay in place. It pulls out whenever I try to pull back the vacuum. Any tips would be helpful! Thank you


Sometimes the locking mechanism for the wand wears out, make sure u have it all the way in and look where it locks and see if it looks worn ... Fantom Vacums FM760 Twister 500DX Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1263 seconds