Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

Disassembling to ship

\015 Hi , I need help disassembling cleaner to ship and do not have instuction manual if you could please help me i would greatly appreciate it.. thank you . patches352\015

Answers :

Hi, my name is Jon I am a former Kirby salesman and I own an Ultimate G and I know this machine inside and out. First take the cord out of the clips on the back of the handle.

Second at the bottom of the handle there is a grey rubber button that says "push" and you will push it and pull up on the handle. The handle should come right out.

Then what you want to do to take the bag off is push the clip that the bag is connected to and pull the bag out.

That's all you have to do I hope this helps you and good luck!
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Disassembling to ship


Hi, my name is Jon I am a former Kirby salesman and I own an Ultimate G and I know this machine inside and out. First take the cord out of the clips on the back of the handle. Second at the bottom of the handle there is a grey rubber butt ... Kirby Ultimate G Bagged Upright Vacuum

I shipped my brother PE 770 embroidery machine purchased sept of 2010, to a lady who perchased it on ebay. Had used only once. Everything worked fine.I shipped in the original formed styrofoam box. I removed the embroidery arm, releasing the locking plastic hook holdind the machine and the arm together. When to lady removed the machine first in the original plastic shipping bag, two parts fell out. Her photo she emailed showed a black plastic piece with two holes or pivot points.also a silver me


This is a link to the manual for this machine. Do you see a picture in the manual of the parts you are describing? Reply with a part number and I will do my best to help. ... Vacuums

How to disassemble electrolux ZAM 6280?i had already removed screws and don't know to disassemble it. i need to check fuse or if it needs resetting.i'm using it and it suddenly stopped completely.no power at all.


Hi There.. I had the exact same problem with my ZAM6280 model. The PCB part (location C8) had blown. Do you know the details for that part, so I can replace it? Otherwise, you didn't happen to come across any schematics for the PCB Module?? ... Vacuums

Disassemble How do I disassemble the brush and belt assembly?


... Hoover S2220 Flair Bagless Upright Vacuum

Disassembling I need directions on how to disassemble.


YOU DO NOT WANT TO DISASSEMBLE THESE UNITS!! Especially if it's under warranty! They require special tools for assembly and disassembly. ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

I am trying to disassemble a Eureka Mighty Mite model 3130a. I cannot get the back part at the wheels to disassemble.


... Vacuums

Disassembly for repair


Sometimes the brush assembly melts because of the way it was designed, could be broke, but u have to take it out and look at the assembly first, turbine is powered through air suction ... Hoover F7220900 SteamVac V2 Upright Vacuum

How do i disassemble my tristar-nkc-mo 9mm handgun?


... Tristar Vacuums

How do I disassemble a Dyson floor tool/head please? (The duel one for hard floor & carpets)


Start by turning the head over. I have marked the 3 points you need to undo to take off the base plate. Simply twist the 2 knobs and slide other catch in the centre of the head. The base plate should now lift off quite easily. ... Dyson DC08 Cylinder Bagless Canister Cyclonic Vacuum

Shark professional steam mop disassembly instructions


... Euro-Pro Vacuums

Bissell butler revolution disassembly


We have a network of BISSELL Authorized Service Center for warranty repairs. If you are experiencing difficulties, the technician will let you know the cost for those repairs if your machine is outside of the one year warranty timeframe. You can l ... Bissell 6700 Butler Revolution Bagged Canister Vacuum

Disassemble electrolux model 4235 to replace belt


... Electrolux Vacuums

How do I disassemble a bissell 5770 P handle?


... Bissell 5770 Healthy Home Bagless Upright Cyclonic Vacuum

Bissell Promax 1600 disassembly


Small flat tip under lip, pry up, top unsnaps , do it in 4-4 spots, comes right off. ... Vacuums

Motor disassembly electrolux ambassador


... Electrolux Vacuums

Disassemble electrolux olympia one vacuum.


Before taking the machine apart, always check for clogs in the hose and power nozzle, full bag, and/or plugged hole under the bag. Suction/vacuum loss can also be caused by leaky or cracked hose, including the section in the power nozzle.<br /> ... Electrolux Vacuums

Lux 5000 vacuum cord will not rewind it is pulled all the way out need to disassemble


This rewind is not easy to work on, I rewound my Eureka with much persistance. The vacuum shop didn't want to tackle this.\015\012 It's easy to cut your fingers on the spring. ... Vacuums

Hoover u8173-900 think motor is bad but how to disassemble


Is this a Savvy? If so your problem may be in the handle switch asm or one of the circuit boards. The switch is really a problem, but they have come out a hopefully a better one. If it is the motor, take it aprt, you can check it with an ohm-meter ... Hoover F7220900 SteamVac V2 Upright Vacuum

Need instruction to disassemble Hoover F7425-900


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

How to disassemble epic 6500 sr / motor noisy


... Electrolux Vacuums

How to disassemble the electrolux vacuum cleaner z1660


... Vacuums

Leaking water and soap from bottom rear of machine. How do you disassemble to find the problem?


VERY CAREFULLY! ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Hover F7452-900 My brushes are not turning. I have taken the tanks off to check the switch that changes from carpet to hard terrain to Ceramic tile.I noticed that there is a spring that has came off. I tried to disassemble the top half (nose) of the cleaner but I have came to a stand still. I cannot figure out how to remove the cover so I can figure out where the spring should be attached. I have removed all the screws that are visible and it still won't budge. It is loose but on the back side o


Regarding the brushes not turning:\015\012\015\012Your filter may need to be cleaned. It is located behind your brushes. With your tanks removed and the cleaner unplugged; tilt your cleaner back. The filter screen located behind your b ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Disassembly of Miele red star? - Miele Vacuums


First remove the lid by opening it and pulling straight up while using a screw driver to pry on the black hinges that go straight down into the unit. After that there are two silver screws on the black pedal assembly pull up ... Miele Vacuums

The kenmore premalite upright seems to always break the ring around the middle of the suction tube-rendering the thing useless--sears wont sell the ring, only whole tube-tax and shipping is about 50.00---chat rooms everywhere complain about this prob.--what can I do to fix this with stuff I would find in my shop???


Take the broken part to a Panasonic servicer, alot of Sears Vacuums are made by Panasonic and they may have the part you need. Supply me with the model number and the sears part number, I would like to see what part you are talking about., ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0112 seconds