Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

I cannot get the belt onto the motor shaft - Kirby Ultimate G Bagged Upright Vacuum


Answers :

Take head off machine, look in round hole at back of head pick up the belt with the lifter to the 12 o'clock position first the refit head onto the machine, then release belt lifter to the square position
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I cannot get the belt onto the motor shaft - Kirby Ultimate G Bagged Upright Vacuum


Take head off machine, look in round hole at back of head pick up the belt with the lifter to the 12 o'clock position first the refit head onto the machine, then release belt lifter to the square position ... Kirby Ultimate G Bagged Upright Vacuum

I cannot get the belt onto the motor shaft on my sentria kirby vacuum


Here is a video of belt change ... Vacuums

Cannot get the belt on my kirby sentria - Kirby Ultimate G Bagged Upright Vacuum


If you go to this Utube site you will be able to view different videos on the vacuum and even one about putting the belts on.\015\012\015\012Be well.\015\012\015\012Paul ... Kirby Ultimate G Bagged Upright Vacuum

I can't get the belt on? No green light. - Kirby Ultimate G Bagged Upright Vacuum


Check to ensure that the unit is properly assembled before powering back on. ... Kirby Ultimate G Bagged Upright Vacuum

I need to replace the belt on my kirby. - Kirby Ultimate G Bagged Upright Vacuum


If this is like my Kirby, there are colored slots on each end that slides the brush in and out and they are different sizes but the belt is connected in the middle. First take the bottom cover off. It should be made out of rubber and metal, and it po ... Kirby Ultimate G Bagged Upright Vacuum

Install kirby belt 301291 - Kirby Ultimate G Bagged Upright Vacuum


I just figured it out myself.\015\012\015\012Thanks ... Kirby Ultimate G Bagged Upright Vacuum

How to i get the belt on my kirby g4 - Kirby G4 Bagged Upright Vacuum


Complete instructions how to change/attach the belt you can see on our website:http://www.goodvac.com/articles.asp?id=143Good luck,Rocky ... Kirby G4 Bagged Upright Vacuum

I have a Eureka 4870GZ. It turns on, but the brush roller doesn't move. The belt looks fine. I do have an extra belt and would try replacing the old belt, but I can't get the old one off the motor shaft or the new one on. I called Eureka customer service. The lady said there's supposed to be a small space between the motor shaft and the outside edge of the vacuum where I can slip the old belt off and the new one on. I don't see it. It looks like the motor shaft goes into a recessed place in the


Remove the top cover so that you can access to belt, You'll find 2 rows of 4 decorative holes on the top cover, In two of the holes you'll find the screws, Please use a flash light to see in that., Once the screws are removed, you'll be able to ... Eureka Vacuums

Belt is on but roller isnt moving - Kirby Ultimate G Bagged Upright Vacuum


You have to release the belt off the belt lifter, or belt could be over stretched ... Kirby Ultimate G Bagged Upright Vacuum

How to get the screws in the motor housing - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Cant get belt on correctly - Kirby Generation 3 Bagged Upright Vacuum


Http://www.kirby.com/Portals/0/videos.html\015\012hope this helps :) \015\012if it does please vote ... Kirby Generation 3 Bagged Upright Vacuum

Motor is weak and spindle starts to get hot - Kirby G4 Bagged Upright Vacuum


Hello, hartI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ta ... Kirby G4 Bagged Upright Vacuum

Little suction motor on - Kirby Ultimate G Bagged Upright Vacuum


If you turn on the motor and the bag inflates fast your engine is working fine.You can have something clogged in the mini-emptor, or the fill tube in the exterior bag which can potentially restrict airflow. Also if your bag is full to th ... Kirby Ultimate G Bagged Upright Vacuum

I have a Kirby Dual Sanitronic '50' Vacuum Cleaner I bought in 1966. The motor does not start when I attach the belt lifter of the rug nozzle. When I remove the rug nozzle and detach the belt from the motor fan shaft the motor starts when I depress the nozzle switch and the power switch . Seems like the brushes in the motor are worn out. I do not have a manual for this unit. Can you assist me as to what newer unit is this compatible to and the problem I'm having at present??


... Kirby Vacuums

The belt on my used Eureka Boss 5857 upright slips off the end of the motor shaft every time the vacuum is used. When I turn the brush roll slowly by hand, the belt walks toward the end of the shaft. It looks like there was a plastic projection from the base that snapped off, and maybe that plastic piece used to block the belt from falling off. Do I need to try to reconstruct that plastic piece, or is something else wrong?


... Eureka 5856BVZ Boss Bagless Upright Cyclonic Vacuum

I need a manual for Kirby G7D vacuum. - Kirby Ultimate G Bagged Upright Vacuum


Hello,you can order one on our website: http://www.goodvac.com/Kirby_Ultimate_G_manual_p/k-sup-mnl-260001.htmG ... Kirby Ultimate G Bagged Upright Vacuum

Replace cord on kirby ultimate g - Kirby Ultimate G Bagged Upright Vacuum


Simple see utube for video showing you how ... Kirby Ultimate G Bagged Upright Vacuum

Kirby skips while vacuuming carpet - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

How to change a band on a kirby vacuum? - Kirby Ultimate G Bagged Upright Vacuum


I think you mean belt??\015\012Take the nozzle of, remove the brush roll, put the a new belt over the brush roll, re-install and put the bottom plate on, making sure that the belt is in the middle of the brush roll. Turn the big knob on t ... Kirby Ultimate G Bagged Upright Vacuum

How much does kirby ultimate G weigh? - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

Trying to replace belt on hoover convertible bagless upright u8188900. belt replace # 38528-049. i have opened vacuum and put belt back on, but it will not get tight enough around the motor gear and the brush spool to be able to activate. am i missing something? mike


... Hoover Vacuums

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

Motor whined loudly. Vacuum failure. Suspect motor failure. Hoover.com doesn't list a replacement motor. Drive also failed - could be secondary belt HOOVER U6323- Power Drive Bagged Upright Regards, Jeffrey


Hello, funI was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

Belts on my vacuum last only a short time, the keep getting chewed up. Seems that the belt does not align properly between the brush bar and the motor shaft.


The belt is either contacting the \015\0121. Check to see that the roller is installed properly (make sure it is not reversed and that it is all the way in).\015\0122. Check to see if there is any play in the motor shaft and that the mo ... Eureka Smartvac 4870 Bagged Upright Vacuum

Vacuum has no power - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1518 seconds