Having problems with your Kirby Ultimate G Bagged Upright Vacuum ?

Sweeper vibrates when pushed forward.

\015 My kirby ultimate G series vibrates or gives resistance when pushed forward. I replaced the rear wheels thinking that would solve the problem but it is still happening. Any suggestions on what is going on and how to fix it?\015

Answers :

Do u put it on drive or neutral? does the wheels spin when on drive? is the height adjuster on the right level?
It is in drive when I am having the problems and the wheels are spinning. I also changed the height adjuster thinking that was the problem but it still does it regardless of where the height is positioned. I also tried adjusting the roller brush and that also did not help.
Repair Help & Product Troubleshooting for Kirby Ultimate G Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sweeper vibrates when pushed forward.

Do u put it on drive or neutral? does the wheels spin when on drive? is the height adjuster on the right level? ... Kirby Ultimate G Bagged Upright Vacuum

My Bissell Proheat 12 amp is hard to push forward(whether on or off). There is a loud clicking noise when pushing forward and it ''jumps'' up on every loud click. It's OK when pulling backwards, sprays and vacuums up water. Belt appears OK. Thanks

I had this same problem and here is what solved it for me. On a previous cleaning session, my wife decided to take the two front screws out of the clear plastic shroud that covers the brushes in order to clean behind it. Upon re-installation, she did ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Self propelled vac: goes great on hard floor or hard slick carpet. Goes backwards fine but will not pull itself forward very well. Requires some effor to push it forward. I have adjusted the cable so the lever on the motor goes as far forward as possible. Suggestions? Model U6446-900

Dear Nasherrill,\015\012\015\012I've found a friend! I thought I was the only person in the world who owned the Hoover Model U6446-900! This model does not appear on the http ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

Silvermoon overheated and shut down. we've waited for it to cool down. When attempting to start the sweeper the red caution light (red triangle with exclamation mark comes on) but sweeper does not turn on. There are no obstructions in the hose or sweeper bag. There is a reset button. I pushed that but still no luck. Is there a fuse or something that needs to be replaced?

... Miele s558 Silver Moon Vacuum

Brush won't rotate when pushed forward

I had the same problem . The reason it acts like that is due to the cable that runs from the vacuum motor to the brush assembly has an intermittent open. My fix was to find the small cable that was causing my troubles and splice it. Making sure that ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

DC07 Very difficult to push forward.

On the front of the base there are 3 very small rollers made out of rubber, these are either just dry and won't turn or worn and or damaged, that is your problem / honest its that simple ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Is there a wrong way to attach the belt and the sweeper?? My Hoover Runabout is making a rubbing noise, like the sweeper is hitting something, and it's real hard to push.

Take off the belt . clean any hair from brush roller make sure movement smooth . re position belt and move by hand to make sure roller is not skew , , rubber is riding sideways and causing friction . ... Hoover Vacuums

I have a Bissell Proheat 2x Model 9200. The solution goes directly through to the carpet. The tank empties extremely fast even when I am not pushing the button. I have also noticed that I have soap spots on the carpet when pushing the cleaner forward. These spots are not even associated with the cleaning mechanism. I have inspected the cap on the tank, but it seems to be OK. Any suggestions?

Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem. ... Bissell 9200 Upright Vacuum

Greetings - my Dyson DC41 animal vacuum seems to be having problems with the ball - the right side of the ball if you were to be standing behind the machine seems like it's tightening as it rolls forward, as it tightens its harder to push the machine forward. Any thoughts, any fix it ideas? Thank you.

... Vacuums

My hoover widepath tempo pushes easy in any hight when off, but turn in on and you can hardly push in forward. I took the beater bar off and cleaned everything and still having this problem

Make sure the beater bar is turning sometimes it will freeze up with dust and dirt will get inside the bearing caps on the end of the brush ... Vacuums

G-5 Kirby self-propel works intermitently. The handle must be jiggled until it engages forward. The same for reverse. Once underway it will continue indefinitely until the need to change direction. Jiggle go forward,jiggle go in reverse. It seems as though it helps to push the handle at an angle to the left depressing the switch on the left side at the base of the vacuum head.

Sounds like a loose wire, the wire is connected to the handle, you may be able to fix this yourself but be careful you can void the warranty by doing it your self. (most people make the problem worse) remember your kirby has a lifetime warranty (limi ... Kirby Ultimate G Bagged Upright Vacuum

G5 Kirby. Works in Neutral fine. When Drive is engaged and I push forward, the wheels do not rotate forwards, however on the pullback stroke the wheels rotate backwards. What causes this? Something is clearly in the wrong position, so a diagram showing the correct position of the part that is affected would be useful.

Hello, anjeI was trying to help you out here. Maybe this will help some? I was going backto some customers that asked questions in the recent past and even fartherback. It appeared that no one answeredsome of them, So, I thought I would ta ... Kirby G4 Bagged Upright Vacuum

Hi, I have a Sebo X4 which is almost 3 years old. I haven't had any problems with it until the last couple of days when I notice a slight screeching noise when in upright position, coming from the roller mechanism area. If I slightly push the sebo forwards it gets worse, if I tip it back it stops. If I take the roller out and switch on, there is no noise. I have always been careful not to tip the machine forwards when using the hose, but I recently lent it to a friend whose hoover had broken do

I dismantled the top part of the machine from the bottom and there stuck right down in the bowels of the tubes was a piece of card, a dress label! somehow it was only making a noise when the machine was in an upright position. It took a bit of stretc ... Sebo X4 Bagged Upright Vacuum

My eureka central vac power brush turns off when pushing forward than back on when pushing back. Ever seen this before?

Yes I repair them all the time. What that means is that the connection of the hose handle to the power brush upper wand is loose. This can happen over time with use. The connection just loosens up. Do you have the exact model of the power brush? ... Eureka 1810 Central System Vacuum

I can barely push the vacuum forward and there is noise

Dyson design to help save belt so its not destroyed when brush grabs. its the clutch you \015\012hear very annoying and scary lol .it should move very easily forward almost pull itself in \015\012carpet mode the way the brush rotates, unless ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum

Every time i push the steam vac forward it dispenses water

You are having the same problem i am and so far the best solution i have found is i need a new clean tank just got my steamvac today bought it cheap so not complaining much the other solution i found was to only have the cleaning solution tank in for ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I had to replace the switch in my Kirby G6. It took some doing but I got in out and the new one in. I must have miss labeled the wires because when I pull backwards the clutch pushes forward. Ther

Go to kirbvacuums.com and look up your model number ,they might even have a toll free number you can call ... Kirby G6 Bagged Upright Vacuum

I have to push the sweeper, there is no drive

Be sure your belt isn't slipping on the beater bar. Might be time to get a new belt or at least take off the beater bar and clean everything. Dust can cause it to slip ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

How to put the forward lock back on dyson dc 14 low reach sweeper

... Dyson Vacuums

Cannot push forward

Sounds like tear down to me to find out whats jamed in the whells ore the belt there not much to fix there things ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Bissel Proheat 2x "catches" when it is pushed forward-- Help Please!!!!

Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=618960&thid=499675\015\012Bissell ProHeat 2x "catches" when it is pushed...\015\012Posted by Marlene101 on Apr 08, 2008 ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Kirby G5 pulls to the right and sutters when pushing forward

First adjust the height of your brush. You will have to take the bottom plate off as you were changing a belt. There are 3 height adjustment settings located at the end caps marked 1,2, and 3. Take note of where it's at and ... Kirby G5 Bagged Upright Vacuum

Agitator stops when sweeper is pulled backward

If you have made no changes to the vacuum's setup and are using it on same carpet you have previously used it on with no problem, then the most likely cause is the agitator/beater bar's drive belt is worn or on some models may have a tension adjustme ... Kenmore 34923 / 34925 Progressive Bagged Upright Vacuum

Does not allow you to push forward

The screws were tight and it still rubs on the carpet. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Vacuum Cleaner When I vacuum it doesn't pick up; in fact it leaves hair and debris behind while pushing vacuum forward. Is this a belt problem?

Yes it is , the belt has to be replaced yearly even if it isn't broken because it gets too stretched out. ... Bissell Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0212 seconds