Having problems with your Kirby Vacuums ?

I am very unhappy with my Kirby. It's nothing like the demo they showed me. It won't even get lint off my bedroom carpet and I only had it for less then 2 months and the belt broke. I want my money back and I'll give the Kirby back!


Answers :

Give it back to your kirby dealer.
Repair Help & Product Troubleshooting for Kirby Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am very unhappy with my Kirby. It's nothing like the demo they showed me. It won't even get lint off my bedroom carpet and I only had it for less then 2 months and the belt broke. I want my money back and I'll give the Kirby back!


Give it back to your kirby dealer. ... Kirby Vacuums

I want to know if it's possible to give back my kirby vacuum it's been months but i don't use it because i moved to a place with no carpet and i'm still paying for it


Sell it on Ebay... That would be the beswt things for you because Kirby does not except returns unless it is factory defaulted. ... Kirby Vacuums

I have a kirby sentria. vacuumed up my son's headphones and immediately shut if off. took brush off, unwound headphones, put it back together. when i turned it back on, the belt snapped. so i went to vacuum place, got new belt, but when i put it on, with the green arrows lined up, it doesn't have much suction. with the red arrows lined up, it just smells like its burning and i don't want to break another belt! HELP!!


Take the front off the vacuum and check inside both the front portion and the canister for additonal clogs. Sometimes something will get caught in the impellor, causing the motor to overheat. Since there's little suction and the smell, I'd guess th ... Kirby Generation 3 Bagged Upright Vacuum

Hi, I bought a Homedics toe touch weighing scale about 12 months ago (or less). I don't use it that often but a short time after I'd bought it it has started give inaccurate readings in terms of weight or no weight readings at all and just gives me the 'Err' message. I have changed the batteries but this doesn't seem to help neither does using it on a hard surface. Any ideas - I haven't kept the receipt so can't take it back! Regards Eleanor Kirk


... Homedics Vacuums

I just bought a Kirby Sentria vacuum and shampooer less than a month ago. When they came and done the demonstration at my house they did not leave a manual or any instructions. They said they would be back the next day but have not been back. I need to clean my couch and have no idea how to hook up the attachments. Can you please help me?


... Kirby Ultimate G Bagged Upright Vacuum

Windtunnel first one used 6 times beater bar stopped working, took apart cleaned and belt was fine. this one had a reset switch for beater bar. had insurance at best buy so returned for a new one. used 2x beater bar not working and not dirty, no reset switch on this one., now back to the store for another? i don't even want the same one. I wonder how many they are gonna give me. This seems to be a common occurance.


Sorry, you feel like that. I have rentals and 6 windtunnel's (I prefer the bagged ones) and have never had a problem such as you have described. I think Hoover makes a great vacuum. ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum

Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don't know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use


If the green light is off, then its time to replace the band. This video shows you how. ... Kirby Ultimate G Bagged Upright Vacuum

Kirby belt my belt on my kirby ultimate g came off and I can't figure out how to get it back on please help!


Check out my online guide. I also have instruction manuals!\015\012\015\012http://reviews.e ... Kirby Ultimate G Bagged Upright Vacuum

I had my Fantom in for repairs (filter, light, belt, and cleaning) less than 7 months ago. Now its not picking up again and the brushes are not rotating. Does this mean another belt? At $69+ every 6 months, I'm thinking of getting another vacum. Any suggestions? Thanks, Judy


Sounds like you are going to need a new belt. It also wouldn't be a bad idea to have the edges of the roller clean because hair and carpet can wind up on the edges making it harder for the roller to turn. ... Fantom Vacums FM741 Twister Bagless Upright Vacuum

Hi, belt came off ny Electrolux Velocity 2000w upright, got belt back on but have a metal srip that looks like it belongs at the motor end to keep belt on. which way in does this go as plasticlooks bit damaged and dont want to force it in wrong way,


... Electrolux Vacuums

My Hoover Wind Tunnel Bagless Pro Pet is making a very loud thudding noise when the belt rotates, belt seems to be intact and in place, what am I missing? Vacuum is less than 6 months old, belt is not worn and motor seems to be fine.


... Vacuums

Kirby sentria My roller brush won't spin belt is not broken I cleaned the Roller brush and put it back it. It put it back but it looks like the sensor balls aren't touching the plastic part underneath. The green light Doesn't turn on either. It was just working and it stop picking up out of nowhere this


... Vacuums

I have a Kirby Heritage II which normally works amazingly well, but it's not playing at all nicely today - and of course we have apartment inspections tomorrow. *dies* The belt broke today (as did the replacement belt, which I'd bought at the same time, so apparently the rubber was old), so I went over to Stark's to get some new ones - but it still won't cooperate. I've taken the head apart and put it back together several times, to be sure that everything is properly seated, but it's just not


... Kirby Heritage II Vacuum

Hello, Could you send me an exploded view of an engine kirby please? My Kirby vacuum cleaner I think for 1997 I think it is garnet, having wanted to change the coals, I do not know the back, is the cause of my request, I contacted a person previously in Bastogne (Belgium) several times which promised to help me but in vain, I count on your good will so I can reassemble it and use it again. In advance, thank you


Try this site out:www.onlinevacshop.com/kirby-G5-parts-manual.phpGood Luck!Jim ... Kirby G5 Bagged Upright Vacuum

How to put a Kirby Vacuum belt back on New belt seems too short


To put on a kirby belt all you need to do is put on the belt on the brushroll, put the brushroll into the housing making sure the marks on the end of the brushroll are the same. Take the spin dial in the front and "hook" the belt till the dial reads ... Kirby G5 Bagged Upright Vacuum

Want to know when back order #M0224898-00 will be filled or what is the problem? it has been more than two months. If I can't get hose assm then I want to return telescopic tube-new that was ordered and received 9/22/09.


2 mths???!!! WOW, Who is doing the repair? Where is your unit at? ... Euro-Pro Shark Bagged Pro Canister EP754Vacuum

Hoover 2000W dust manager cyclone- Have had this for about 2 months and the brushes stopped turning thinking that the belt had acme off turned it over to try to get in to look at belt now the bottom wheels have came off and will not go back on have not lost any bits literally just undid one screw! Please help!


... Hoover Vacuums

Hoover windtunnel I HAVE REMOVED BOTH BELTS AND I DO KNOW HOW TO PUT THE LARGE BELT BACK ON BUT THE SMALL ONE IS GIVING ME TROUBLE


Put the V belt on the pulley first, then the flat belt, put it over the motor shaft or pulley, then you have to stretch it to go over the pulley next to the V belt pulley. ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum

How do I replace the drive belt on a kirby G4? Actually the belt is already replaced I just need to know how to reattach that front part back onto the main vacuum. HELP


Greetings from GoVacuum,\015\012\015\012Here's a video we shot showing you in detail how to install a belt properly, and how to reattach the head properly. I hope this helps you;\015\012\015\012 ... Kirby G4 Bagged Upright Vacuum

Son took the front plate off the kirby heritage II vacuum thinking that was how to replace the belt, now don't know how to put the three rings and belt catcher back on?


Looked at a kirby vacuum that a family member has and saw how it was assembled! Thank You ... Kirby Heritage II Vacuum

I can't turn the belt off of my Kirby vacuum. I had the front off of it earlier to attach the hose, but now when I put the front back on, I can't get the belt to turn off. The lever twists about 3/4 of the way around, but will not go the rest of the way.


Turn the front part to the green so it is level and then twist the front to the red make sure the belt catch the hook as you twist it then if the belt is hooked just put it back on the vac like normal and lock it in place then twist it back to the gr ... Kirby Ultimate G Bagged Upright Vacuum

My vacume is less than 6 months old. I've gone through & replaced 4 belts. Now I realize the roller is not rolling which is causing the belts to break. The roller is free of all hair and debree. What should I do to fit the roller?


Very strong chance the end caps, made out of rubber could be a manufacturer defect. Many parts on vacs are made by different sources. ... Bissell Vacuums

I need to know how to put my belt back on my kirby 2000 G6 vacuum belt


Greetings from GoVacuum,\015\012\015\012Here's a very informative video that we've recorded explaining in detail how to correctly install the belt on your Kirby Generation vacuum cleaner. I hope this will help you.\015\012\0 ... Kirby G6 Bagged Upright Vacuum

How do I get this darn belt back on my Kirby?


Hello,We've actually shot a very helpful video repair on how to change the belt on your Kirby. Also, at the end of the video it shows you how to put the head of the vacuum back on properly. This video also gives you instructions on ho ... Kirby G4 Bagged Upright Vacuum

We have a new hoover bagless that is a couple months old. The pet hair attachment stopped working. I disassembled it found lots of hair wound around the various rollers and removed - painstakingly thorough i might add. Problem is the brush still wont spin and now the belt seems loose - I think I put it all back together correctly but wondering if there is a trick to this?


Without the model number, I can't look it up, but this has a 1 years warranty on it, maybe take it to a warranty shop. Just take proof of purchase, model and serial numbers. ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0653 seconds