Having problems with your Kirby Vacuums ?
Kirby Sentria- no suds coming out
\015 Have everything properly assembled, checked the filters and the sponge, no suds are coming out\015
Repair Help & Product Troubleshooting for Kirby Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Kirby Sentria- no suds coming out
... Kirby Vacuums
Kirby Sentria I bought my kirby sentria just before we were to move house and although I have the instructions somewhere, they will be boxed up and I so want to clean the carpets before I move. Problem is that I don't know whether the belt should be on or off when using the big silver front with the Kirby insignia on it. I know that the green light should come on when it is working properly and it does not, so I am doing something wrong. I can attach the attachments no problem but I want to use
If the green light is off, then its time to replace the band. This video shows you how. ... Kirby Ultimate G Bagged Upright Vacuum
Kirby shampooer The suds are not coming out of the shampooer. I made sure it was connected right. The sponge filter and the cap are attached. i have a g4 vacuum and the screen in in properly.. if i move at a snails pace i can get spots of suds about every 6 inches or so but not a lot. i have adjusted the on and off, if verified the video its put together correctly but it acts like no suction .. i thought of a small hole in the hose for the suds and cut off about 1 inch it act better but not by
On the shampooer tank, remove the screen cap from the little hole that the shampooer hose plugs onto. Clean the screen and make sure that it is not plugged up with debris. Make sure that the screen is securely glued to the cap all the way around the ... Kirby G4 Bagged Upright Vacuum
Kirby not shampooing, no suds coming out.
Make sure the tray is all the way down. Step on the toe petal to adjust. Turn on power assist.Turn sud control valve right to increase suds. ... Kirby Ultimate G Bagged Upright Vacuum
II have the kirby sentria, i have it in canister mode with blower attachment on the hose is on with the hand sprayer attachment the problem is the foam is not coming out the sprayer used it just fine all day went to refill w/ water and cleaner now the foam wont come out whats wrong with it?
Make sure the "straw" is in.See if dust coming out of the hose did not clog the air passages. ... Kirby Heritage II Vacuum
My Kirby Sentria makes a clicking sound when it is pushed or pulled. It is coming from the region of the rear wheels. Any suggestions?
... Kirby Vacuums
I have a Kirby Sentria and when I push the "on" spot with my foot it comes on then when I take my foot off - it goes off! What is the problem?
Your switch has worn out. you'll need to replace it cause it wont be long before it wont turn on at all. ... Vacuums
Kirby shampooer The suds are not coming out of the shampooer. I made sure it was connected right. The sponge filter and the cap are attached.
You may be missing the small round suds screen. It should cover the hole where the shampoo goes from the tank into the hose. It may be wedged sideways in the hose end. \015\012\015\012Marci ... Kirby Generation 3 Bagged Upright Vacuum
Hello, I got a used Kirby Sentria. When I run the vaccum and push and pull on the handle, I can hearing a friction type noise. I got up close to the vaccum and it is not the wheels or roller. It is coming from the base of the handle. It's like it is pushing on something on the vaccum body and is creating the noise. Maybe transmission? Is this normal, or is it something I should be concerned about? Thanks for your help!
Try new belt yours may be slipping ... Kirby G5 Bagged Upright Vacuum
Kirby sentria green light won't come on - Vacuums
Kirby sentria it has no power.is there a saflty button on it if you do not have it together right. ? where it will not come on.
Yes there are two safety switches click on the link below and watch video for fix.http://www.youtube.com/watch?v=3XfcF9nvxQQ ... Vacuums
I have a Kirby Sentria and I just tried to use the shampooer. It is not spreading the foam, instead it comes out as a 1 1/2 in strip. The belt is on right, I took it off and put it back on. I don't know what to do. Thanks
Q. What should I do if the Kirby system is not cleaning effectively?A. Check if the green light on the nozzle is on.Check the brush roll to make sure it is not clogged and can move freely.Check to ma ... Kirby G6 Bagged Upright Vacuum
I have a kirby sentria vaccum carpet shampoo system and I cannot get the shampoo suction head to work! It comes on but the belt is not turning. I have tried taking it off and looking at the assembly but no luck. And I have tried turning the belt engage lever to off and on to see if it makes any diference.
I had the same problem at first but figured it out. Make sure before you put it on the vacuum itself, that the shampooing unit is completely together. The belt needs to be taunt like it would be when the brush is turning. Once you put it on and turn ... Vacuums
Can't get green light to come on brush not spinning on Kirby Sentria snf don't have dvd or owner's manual
... Kirby Vacuums
Kirby Sentria Shampooer is not foaming the width of the tray. It is only coming out on one line and is saturating the carpet with water in that area. What is the problem? What do I do? We just bought this 5 mos. ago. Please help.
Your shampooer is not broken. (sorry Fanny)\015\012\015\012You are missing a wee screen that fits on the hole where the little hose plugs into the tank. Check inside the hose end or down inside your shampooer box. Here's a link to my onli ... Kirby Ultimate G Bagged Upright Vacuum
Kirby sentria shampooing not right
Make sure u put the exact/right instructed amount of soap in the tank.....after each room, wash & clean tank filter. open tank all the way.....pull back slowly. if too much foam...adjust tank knob. ... Kirby Generation 3 Bagged Upright Vacuum
KIRBY MICROSWITCH I SUSPECT THE MICROSWITCH ON THE FRONT OF MY KIRBY IS FAULTY. I COULD GET THE MACHINE TO COME ON BY PRESSING THE SWITCH, NOW THE VACUUM DOES NOT COME ON AT ALL. CAN THIS SWITCH BE REMOVED OR CAN I OVERRIDE IT?
Http://ww.ebay.com/gds/REPLACING-THE-POWER-SWITCH-ON-ANY-KIRBY-G-SERIES-VACUUM-/10000000003752018/g.htm ... Kirby G4 Bagged Upright Vacuum
Kirby sentria does not have suction - Kirby Sentria 192006 Power Cord
... Kirby Sentria 192006 Power Cord
Kirby Sentria doesn't pick up visible dirt
YOUR BELT IS NOT CONNECTED CORRECTLY...USE MY GUIDE TO FIX IT...\015\012\015\012http://revi ... Kirby G6 Bagged Upright Vacuum
Kirby sentria shampooer
Too late for your party, but my take on the matter is that you either didn't have the belt lifted all the way up before you put the shampooer head onto the machine, (brushroll was not spinning) or you may not have had the height adjustment lo ... Kirby Ultimate G Bagged Upright Vacuum
Kirby Manual I can't find my manual and I need to know how to use the handheld shampooer part of my Kirby. It is the Kirby Sentria. Can you halp? Thanks~ Naomi
The spray gun instruction HERE but be very careful - try shampooing in an inconspicuous area first. This is essentially as if you would buy some of those " ... Kirby G6 Bagged Upright Vacuum
Kirby Seems like you know alot about the Kirby. I know how to use my Sentria (unlike these other idiots) but I keep screwing up the shampoo tray assembly. The brush snaps into the tray just fine but the tray doesn't really stick to the head. It detaches when pushing and pulling the unit. And who knows where that cover goes? It say 'push here to open'
Machine will not come on ... Kirby G6 Bagged Upright Vacuum
I just replaced the belt on my Kirby Heritage II, and it keeps coming off. It is engaged when I check it, but as soon as I start vacuuming, it comes off?!
You got the wrong size. ... Kirby Heritage II Vacuum
How to use the kirby sentria atttachments - Kirby G6 Bagged Upright Vacuum
You can get instruction manuals on DVD, VHS or book format by clicking this link,... ... Kirby G6 Bagged Upright Vacuum
Sponge filter I have a kirby sponge filter for my Sentria shampoo system and dont know where it goes. It stop working and making foam. Kirby sent me the sponge filter saying this is what i need and i would know where it goes. I dont nor kind I figure it out. please help!!!!!!!
On the end of the shampoo tank where it attaches to back of motor where the bag is normally attached ... Vacuums