Having problems with your M&S Systems FX-3000 Bagged Central System Vacuum ?

M&S FX 2000 vacum shuts off

\015 After 3 to 5 minutes vacum shuts down have to hit reset button in order to get it to run again\015

Answers :

Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.


Consider\015\012 the savings that can be had when an informed Expert can save you a $100\015\012 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!

If\015\012 you don't want to pay - feel free to re-submit your question so it \015\012returns back to the top of the work queue if you still need help.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
Repair Help & Product Troubleshooting for M&S Systems FX-3000 Bagged Central System Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Vacume Overheating My vacum is overheating and then shuts down for awhile but doesn't start again untill the vacum has cooled down.. Are there any heat-relays or something like that that could cause the problem ?


There will be a filter between the cylinder/bag and the engine. If your vacuum has a HEPA filter there will be one on the other side of the engine. Remove both of these and clean them out with water, allow to dry and replace. ... AEG Vacuums

I was vacuming with the hose only with my kirby generation 3 vacum and it suddenly made a different sound and smelled strong of burning. I immediately shut it off and unplugged it. It IS about 30 yrs old. Do you think it is worth taking in to pay someone to look at it or it just bit the dust?


It might be the belt and if it is it will be a sipmle fix. If it isn't I think It's time to bite the dust and buy new. You won't believe what you old vacuum was not sucking up and for what it would cost to repair vs buying new it would be about the s ... Vacuums

The vacum will run until the hose is inserted and then the motor shuts off. The vacum switch must be hooked up incorrectly. Do you have a schematic?


Before trying to take it apart, check the hose for a blockage. Disconnect the hose at both ends, drop a coin in one end, lift that end of hose allowing coin to drop through. If it doesn't come through, there's a clog. You should be able to clear i ... Electrolux C101 Bagged Canister Vacuum

I bought a Eurika upright vacum (the boss whirlwind lite) it is pretty new, keeps shutting off before i am done vacuming, and the hose doesnt **** very well!!!


Your model mite have a divice that turns the motor off if it heats up if so take it to a repair shop and have them look at it ... Vacuums

M&S FX 2000 vacum shuts off


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... M&S Systems FX-3000 Bagged Central System Vacuum

My lift off revolution vacume shuts off


Hi Kathryn! Your Lift-Off vacuum is equipped with a Thermal Protector that will turn your vacuum off if the motor starts to overheat. This can be caused by dirty filter or reduced air flow. Here's a quick link to troubleshooting steps to assi ... Bissell 37604 Lift-Off Pet Bagless Upright / Canister Vacuum CleanerVacuum

Vacum shuts down when suction starts


Try turning the knob on the top of the vac all the way to the right. ... Electrolux Guardian Bagged Canister Vacuum

Electrolux canister vacum model 1401-b makes a whining noise when it's shut off


... Electrolux Vacuums

I have shopvac series 90L-wet/dry vacum. I was using it to vaccu my car. It was the fourth time I had used it for anything. In the process it just shut down. I have not been able to get any results from it since. I purchased it from a Lowe's Home Center on 8/06. What are your suggestions? David


... Shop Vac Vacuums

Vacum runs fine with hose disconnected and soon as any pressure is put to hose recepticle including your hand it shuts off


These machines have a "Suction" sensor this has become blocked or gone faulty, or the microprocessor has... yes there is one in here too. Probably going to have to get it looked at? ... Electrolux Epic 6500 Vacuum

My dirt devil 110006 vacum cleaner shuts off by its-self


... Dirt Devil Built-in Vacuum Systems Bagged Canister Vacuum

I shut my vacume off to change its bag out. Now it won't come on. Oreck xl2. There were no noises before turning it off or any smells of rubber burning. Just won't come back on. Is there a reset button. What can I do?


An access panel mounted atop a vacuum nozzle base via finger operated latches. When the latches are undone the access panel is removed from the top surface of the nozzle base allowing access to the parts of the brush assembly. The panel also has a ... Oreck XL Ultra Bagged Upright Vacuum

My hoover, self propelled windtunnel ,on off switch will not shutoff. the second the electrical plug is put in the wall socket, the vacum starts running and you cannot shut it down with the on off switch


... Hoover Vacuums

Vacum just shut off when vacuuming - Dirt Devil Vacuums


Could be clogged. Check hose check sole plate if its an upright, check handle of hose if its a canister type or check the filter inside the bag/bin area i.e the white or black filter either behind the paper bag or cyclone- if its clogged with dirt th ... Dirt Devil Vacuums

Vacum shuts off - Vacuums


If you have BISSELL vacuum, some of our models have a brush reset. Here are the instructions to turn it back on: \015\012If something becomes lodged in the foot and the\015\012brush shuts off, turn the cleaner off and unplug\015 ... Vacuums

Vacume is a mach 4 cyclonic, it runs for about 8 minutes and then it shuts itself off? any idea?


The only thing I can think of from your additional comments is when it warms up something expands and it loses continuity of the circuit. Most likely the switch or the breaker. Another thing to check is if it has a hepa filter it may be clogged ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

Vacume overheats and shuts down I replaced the motor.When it cools down it runs again.


The filters had to be cleaned out with air. I replaced the motor for nothing.There are two filters and the cannister give them good cleanings with an air gun. ... Kenmore Vacuums

I can't get the vacume to run for more than 15 minutes before it shuts down presumably do to overload. But I don't get the warning light and I clean it out regularly. I have to let it sit for hours until it resets and I can finish the job


Sounds like you have a blockage. Check your attachment hose by dropping something through it, if it is all clear, then check your duct hose, this is the hose at the base of the cleaner. Many times this will clog and you might have suctionat your ho ... Vacuums

I have a Electrolux Epic 6500 SR canister vacum cleaner. It is nine years old and for the past few weeks it has started shutting off for no apparent reason.The symbol for bag change lights up and it cuts off, but even after I have put a new bag in, it still does the same thing. Do you have any suggestions? There is a little button or switch that the top of the bag fits on. Do you think it could be the problem?


Your machine is probably clogged, look through the wands, look in the bottom attachment, to see if there is anything stuck there. You can also drop a marble through the hose itself to see if anything is stuck there as well. To unclog the hose try hol ... Electrolux Harmony Canister Vacuum - EL6985 Vacuum

Dc07 when vacuming it will shut down20min to 30mins my startup


HiCheck that the main hose is not clogged top and at the base, also check that all inspection airways are clear and after the main brush roll there is nothing clogging. When a vacuum activates its thermal cut out its usually because the motor i ... Dyson DCO7 Animal Bagless Upright Cyclonic Vacuum

I have a cannister vacume, Fuller Brush red model # FB-DCC when I turn it on it will shut itself off in about 30 seconds this will happen several times then it will not turn on. I do not have the owners manuel


First, the word is "VACUUM." Second, it's obvoius that your motor is overheating. When's the last time you CLEANED THE FILTERS, per the operating instructions? ... Fuller Brush Vacuums

Shuts down after 10 min use


I would clean or replace filters on it check the hose to make sure it is not blocked . It sound like it is over heating and making the breaker kick off and after it cools down it resets this is caused by dirty filters or blocked hoses. ... Hoover U5753-900 WindTunnel Bagless Upright Vacuum

Shuts off after 15min


The motor protection 1st has to be replaced ... Hoover U5780-900 Windtunnel Cyclonic Bagless UprightVacuum

Eureka Bagless Widetrack, The Boss, Vacume, model 5893


Had exactly the same problem with my upright Eureka Model 5893\015\012bagless. Eventually, the handle would get hot, and finally it just quit. When handle was disassembled, the wires were melted and it was toast. Ordered a switch after talking\015 ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Fuse auto shut off


Find the current rating for the vacuum cleaner motor (on a plate somewhere on the machine). Is it somewhat less than the breaker rating in the panel? If so, then either the motor is overloading the breaker due to bad bearings or a shorted winding in ... Hoover S5620 Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0309 seconds