Having problems with your McCulloch MC1275 Steam Vacuum ?

Mc Culloch chain saw

\015 My chain saw will start but does not idle for long and cuts out when I press the trigger. Any ideas?\015\012\015\012Stuart K.\015

Answers :

You will need a parts breakdown and exploded views to start with as well as a manual , All you have to do is call 1-800-521-8559 and select U.S. then select the parts department, have your model number ready and ask them for a PDF of the owners user manual to be emailed to you, they will normally be sent in 1 hour for free.
\015\012
\015\012After that is done then you can see the fuel filter and line inside the tank you will need to replace, take your printed views and manual to the nearby lawn mower shop and they will help you get the parts you need even if the original ones are not available. blow out the carb with chemtool and install the parts, use NEW GAS, NEW OIL and from that day forward never leave fuel in a unit for more than 3 months. Good Luck...
It could be a plugged or "gooey" carburetor or the fuel filter in the tank could be bad. At any rate, It is not getting enough fuel. Since most of Mcculloch parts are no longer available, you will most likely be looking for used parts. Here is a site that has some parts, whether for your exact saw or not, you'll need to look. If you can find a chainsaw service center (you'll probably have the mos tluck witha smaller business) you could find out exactly what you need and then look for the parts yourself. There may be other sites online for used or even new parts that someone still has on hands.
\015\012
\015\012http://www.mfgsupply.com/ChainsawCarbMc.html
\015\012
\015\012Good Luck to you and thank you for using Fix YA. Please rate my solution.
Repair Help & Product Troubleshooting for McCulloch MC1275 Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Mc Culloch chain saw


You will need a parts breakdown and exploded views to start with as well as a manual , All you have to do is call 1-800-521-8559 and select U.S. then select the parts department, have your model number ready and ask them for a PDF of the owners user ... McCulloch MC1275 Steam Vacuum

Chain saw starts runs, bur saw won't start next time it is needed, craftsman chain saw


Steam vacuum? no clue but on your chain saw make sure you check the choke. it would explain why it wouldn't start again. ... McCulloch MC1275 Steam Vacuum

I have a Tornado cordless chain saw. I have lost user guide. How do I oil this chain saw?


Google on line and ask for a user manual giving the name, product model number of equipment you are in need of an instruction guide. ... Tornado CW50 - 91450 Bagged Upright Vacuum

McCulloch Chain Saw Manual


Found all the mcculloch manuals you could ever want on mcculloch product information site. Its run by mcculloch an you put the product weather chainsaw or strimmer whatever an the type in the next collum an press download then print it off all very e ... McCulloch MC1275 Steam Vacuum

I need the fuel/gas mixture for a small (12") McCulloch Chain Saw. It has a 2.0 C.I.D. label with Fuel Mix I lnoted at the fuel cap. ja


The 2.0 CID is Cubic Inch Displacement, the size of your motor. As for fuel mixture, generally a 50:1 is a benchmark for this. Typically, it should be 1 gal. of gas for 2.56 oz. of two stroke oil. They sell pre-packaged, pre-measured oil at your loca ... McCulloch MC1275 Steam Vacuum

I need the owners manual to McCulloch Timber Bear chain saw, where can I download it at? Tim from Michigan


Did you get the manual you needed? If not, e-mail me and I'll scan mine and e-mail it back to you. ... McCulloch MC1275 Steam Vacuum

I have a model 2016S chain saw and need to know how the fuel lines are hooked up from the fuel tank to the primer bulb and to the carburetor. does the filler line in the fuel tank go directly to the carburetor or does it go to the primer bulb and then to the carb?


Tank filter goes to the primer bulb and then to the carb. ... McCulloch MC1275 Steam Vacuum

I need a manual for a mcculloch 600123D chain saw . Any idea where I can get one?


... McCulloch MC1275 Steam Vacuum

My eager ****** chain saw will not stay running ?


The 3 adjustment screws are Idle, high and low.\015\012First figure out which screws are which adjustment. Tighten the screws then turn them 1 full turn.\015\012Then start the saw and get it warmed up. Work on the high adjustment. This do ... McCulloch MC1275 Steam Vacuum

I need a manual for a McCulloch 600123D chain saw . Any idea where I can get one?


... McCulloch MC1275 Steam Vacuum

Chain tensioner Is it possible to change the chain tensioner of the Husqvarna 240 to a tool less chain tensioner or at least to the chain tensioner where the adjustment screw is accessed from the side not from the front. The problem is that there is a little plastic part that breaks rendering the chain tensioner useless. I have changed it twice and it keeps breaking. To change it you have to change the whole part that covers the break and chain mechanism.


... Husqvarna DMS 240 Core Rig - DMS 240 w/ Vacuum Pump

Really LOUD Just recently this vacuum went from the normal everyday vacuum to now sounding louder than my power saws in my workshop. Checked for clogs.. everything is clear.... cleaned it all over and then turned it back on and.... The neighbors thought I was running a saw mill out of my house. HELP!


Its the belt if it is a savvy.Have the same problem ... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum

This is crazy, as I've installed about a hundred ceiling fans in my day, but......what is the function of the 3rd pull chain on the Hampton Bay I just installed? It isn't the directional control as the fan has the traditional switch for this. The only thing I can figure is it's a means to control the fan and light with one pull chain. The generic instruction book doesn't address it. Thanks for your help!


Chain #1 = light on/off\012Chain #2 = direction of draft. up / down\012Chain #3 = Slow/med/fast speed control ... Vacuums

Pull chain switch. Pull chain will not switch off light. This is a zing Ear #305 switch. Where can I purchase a new switch?


... Vacuums

Craftsman table saw


Alright, I have fixed mine, so maybe the same thing will work for two as well. I actually have a slightly different model (113.298341) but I imagine the electronics follow the same basic layout. FYI, I got a manual online through Sears for free. ... Craftsman 17026 Wet/Dry Vacuum

I have a fantom power pet vacuum fm 1310 pc and was wondering why i saw smoke and then no more sucction


... Vacuums

I have a fantom power pet vacuum fm 1310 pc and was wondering why i saw smoke and then no more sucction


... Vacuums

Putting blade on a black & decker circular saw for the first time


Push blade on wood the teeth will hold it ... Black & Decker S500 ScumBuster Handheld Vacuum

Table saw not turning on


Yes that is a thermal fuse. wait a couple of minutes and reset it. If the blade is dull, replace it. ... Vacuums

I have a similar problem as many do with this model, "clean Roomba's brushes".. We took it apart last night, cleaned out all of the dust we saw. we removed the cover, the housing for the brushes and everything else we could. Still has the same problem. What now?


Mine did the same thing and no mater how much I cleaned the brush or pulled fibers of the ends it did not stop until I:Removed the little yellow tabs on the ends of both brushes and used a tooth pic to remove the built up inside the bearing ass ... iRobot Roomba 530 Robotic Vacuum

Can you put an 18 in. bar and chain on a poulan 2055 14 in ?


Have you considered a rental? Home Depot rents Makitas (Dolmar) with a 20" bar reasonably. Be warned running a Dolmar/Makita will make you question the value of your Poulan LOL. HTH\015\012Lou ... Vacuums

My craftsman table saw reset trips often with little use. any ideas? maybe the brushes are worn out?


Try a different plug......low voltage ... Craftsman 17026 Wet/Dry Vacuum

System would not work when hose plugged in - checked motor unit in garage and saw it smoking - would turn on for a few seconds and then die


Smoke is bad news. Your motor will require rebuilding or replacement. Depending on brand and model this can be anywhere from $175 US to $400. Post back with make and model and your level of mechanical expertise. ... Vacuums

It smells like something is burning and then I saw smoke coming from the bottom, where the roller brush is.


That means that the belt is very worn and it is slipping on the motor. You need to replace the belt. Here is a link to the belts you need and a manual you can view with instructions: ... Eureka Uno 2998AZ Bagless Upright Vacuum

COOL QUESTION ANSWER HERE !!! so yesterday i was waking in the store and saw this really hot girl and i stiffed up if you know what i mean my question is what is the easy way to unstiff


Think of Barak Obama naked, or your grandmother - which ever works for you eh ? ... Emerson Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0084 seconds