Having problems with your Miele Red Star Bagged Canister Vacuum ?

Intermittent a/c voltage

\015 Appears the winder contacts may be worn out. Cord checks fine; cuts on and off, can usually get it started by winding cord to a certain position. Can you replace the contacts?\015

Answers :

The contacts are fine, they just need to be bent up a little to ensure proper pressure with contact plate. I had exactly the same problem, and it solved it.
Do not remove black graphite lubricant from contacts!!!
Repair Help & Product Troubleshooting for Miele Red Star Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Intermittent a/c voltage


The contacts are fine, they just need to be bent up a little to ensure proper pressure with contact plate. I had exactly the same problem, and it solved it.Do not remove black graphite lubricant from contacts!!! ... Miele Red Star Bagged Canister Vacuum

I am currently unsure, it my Dyson DC16 battery is charging as it should. I read all the posts about Powersupply voltage of 28V and defective PCBs. I now need to know from someone who's DC16 is working properly what voltage the battery should have when it is charged. I currently only measure 24.2V in mine. Supposing there are 6 batteries in there with nominal 3.6 voltage each, which would add up to 21.6, I supposed one could charge with up to 25.2V (4.2*6) and once reach lower the voltage ke


Does it stop working real fast ? ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum

After charging overnight, Roomba only runs about 25 minutes before shutting down with a red light.At this point the battery measures 15.13 volts ( about 1.26 volts per cell ) My hobby experience is that a ni/cad or ni/mh battery nominal charged voltage is about 1.2 volts per cell, and that the recommended end point voltage should be about 1.0 volts per cell. Seems like the battery is ok, butsome kind of voltage regulator is shutting things down prematurely. Is this happening, and , if so, how ca


Reset the Roomba by removing it from the charger, then holding "spot" and "dock" for about twelve seconds. When you let go, the unit will play an ascending series of notes. Then recharge it overnight. If the run time is still short, give Customer Sup ... iRobot Roomba 560 Robotic Vacuum

We have a Kirby Sentria G10 from USA, thouh we are in Europe, where voltage is 220V. What's the voltage of this vacuum? Do we have to get a voltage converter?.


Virtually all US made small appliances are 120 volts. I believe you can find adapters to do the job of perhaps a transformer.Have a look at this https://www.samstores.com/Store.asp?CtgID=30Ask around where you are - mayb ... Kirby Ultimate G Bagged Upright Vacuum

My electrolux Epic 6500 power nozzle Model N109J will not work. It had an intermittent short which I thought I fixed (some of the insulation on the wires were pinched). I fixed the wires and it worked intermittently for an hour then shut down completely. Could the reset switch have a short? When I press the switch nothing happens.


The switch is definitely a possibility, but other problems can also cause this.\015\012Bad switch, needs replaced.\015\012Broken wiring in power nozzle, wands, hose, or canister.\015\012Bad PN motor.\015\012\015\012I str ... Electrolux Epic 6500 Vacuum

Kirby G5 intermittent power


I would say that it is a short in the power cord. \015\012\015\012Try my troubleshooting guide. It helps with do-it-yourself Kirby repairs. You'll also find links to directions, parts (cords too!!) and free repair guides! ... Kirby G5 Bagged Upright Vacuum

Kenmore central Vac - where to connect low voltage wires?


Mosy central vacs have 2 spades close together that stick out on the side, usually where the circuit breaker and auto/manual switch is. This is where you plug the low voltage wires into. ... Vacuums

What is the charger output voltage and mA for the electrickbroom?


... Oreck ElectrikBroom AV-701B Handheld Vacuum

Voltage for igia lazer-vac vacuum cleaner


... Vacuums

Intermittent Power to Powermate


... Kenmore Vacuums

Blue moon works intermittently


Take the hose handle apart and look at the bottom side of the switch circuit board. Sometimes a contact or 2 break loose from the solder and will work intermittenly. Resolder the contacts if this is the case, put back together and try again. ... Vacuums

Blue Moon Miele power head stops intermittantly


It is not a solid short. This is caused by static arcing in the wand and in the connectors from base to hose. I was able to fix mine by smearing some dialectric grease on all electrical parts in the wand(especially by the led switch) and in the three ... Miele Blue Moon Bagged Canister Vacuum

Power nozzle works intermittently


The pin connection from the lower handle tube to the power nozzle are not making good contact. It is new, so i would have warranty service performed. ... Vacuums

Plugged into wrong voltage


... Hoover S3630 WindTunnel Bagged Canister Vacuum

Started to work intermittently, then just stopped


Is the controls to this machine in the hose. If so, then the hose is going bad. That is pretty typical for these models, ... Kenmore 25512/ 25513 Progressive Canister Vacuum

Dyson DC34 runs intermittently


... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum

IRobot 530 charges intermittently


Reset the Roomba: hold down "spot" and "dock/demo" for fifteen seconds, then release and listen for the tune. Then charge the Roomba overnight. The next time you run it, the unit should run longer. If not, call support and let them know you may have ... iRobot Roomba 530 Robotic Vacuum

Voltage Change I am relocating to Canada and would like to find out if it is possible to convert my Kirby (G5) from 220V to 110V. Thanks.


I am moving to europe and I need mine on 220 why don't we trade ... Kirby G5 Bagged Upright Vacuum

Intermittent Power brush


Dirt gets inside and causes an intermitten problem on the hose where it connects with the canister there is a plastic cover where the three pins stick out. on the cover are two tabs on either side. press both tabs together and CAREFULLY pull cover of ... Kenmore 22812 Bagged Canister Vacuum

G5 intermittently or not at all pulling up dirt


Turns out that little light is a BELT indicator. Even though the belt wasn't broken it had stretched and needed to be replaced. So a $2 part and my baby is working as well as ever!! ... Kirby G5 Bagged Upright Vacuum

Dyson DC04 cuts out intermittently whilst in use


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Low voltage wiring


Probably just didn't wire the l/v side of the relay properly. Or forgot to plug the leads from the outlets back in to the vac after you got it all hooked back up. Folks do it to me all the time and then make like it's my fault! Ha ha. Jum ... Broan-NuTone CV750 Central Vacuum

Have a Miele S658 Blue Moon that cuts out intermittently, sounds like most of the solutions to similar problems indicate the circuit board has gone bad in the hose mechanism.......can just the circuit board be replaced or does the entire hose have to be replaced?


Probably needs a new hose. ... Vacuums

DYSON DC07 ANIMAL VAC: IT SHUTS OFF INTERMITTENTLY, GETTING WORSE SURE ITS AN OVERLOAD PROTECTOR IN MOTOR. HAVE THOROUGHLY CLEANED THE UNIT TO NO AVAIL. HELP ???


The circuit tracks should be getting cut somewhere in between some where so it leeds to this problem. ... Vacuums

Dyson DC18 brush beater bar intermittent failure problem.


Take it in to be serviced. It could be a dead motor to bad connection. 5yr warranty will leave you paying nothing. Best Buy or local authorized service center can do it. ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0093 seconds