Having problems with your Miele S7210 Bagged Upright Vacuum ?

My miele s7210 will not stay upright

\015 The release pedal is stuck down and will not move and the hoover will not go upright.\015

Answers :

Repair Help & Product Troubleshooting for Miele S7210 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My miele s7210 will not stay upright


... Miele S7210 Bagged Upright Vacuum

Miele S7210 on/off switch jammed - Miele S7210 Bagged Upright Vacuum


... Miele S7210 Bagged Upright Vacuum

We cannot get the Miele S7210 Twist back to the upright position. The foot lever appears locked. We fear forcing it back to upright.


... Miele S7210 Bagged Upright Vacuum

I have a miele upright S7210 and can not find the replacement hose. Any ideas?


What do you mean by the replacement hose? The original part for your 7210 twist includes the handle grip to lock in to the adjustable wand, or do you mean the short hose in the base behind the brush roll? ... Miele S7210 Bagged Upright Vacuum

How to replace the vacuum belt - Miele S7210 Bagged Upright Vacuum


... Miele S7210 Bagged Upright Vacuum

Miele S7210 upright how do I remove a split hose from the handle end


THIS LINK IS THE MANUALhttp://www.totalvac.com/manuals/miele-vacuum-S7000-manual.pdf ... Miele S7210 Bagged Upright Vacuum

How do i detach hose to remove blockage? - Miele S7210 Bagged Upright Vacuum


Lift the hose out as if you were going to use the attachments. At the base of the hose there is a swivel to adjust the hose 90 degrees. Where the lower section of the hose attaches to the swivel you will see that if you give the hose about a quarter ... Miele S7210 Bagged Upright Vacuum

Miele upright not sucking up? - Miele Powerhouse Plus Bagged Upright Vacuum


Sounds like there is something blocking the main airway. I doubt its the filter. You may have to partially disassemble it. Maybe a hairball or something is blocking it I sucked up one of my daughters thin socks one time, had to take it apart to g ... Miele Powerhouse Plus Bagged Upright Vacuum

Upright Hoover won't stay upright


... Hoover Vacuums

S7000 my miele upright vaccum cleaner looses it suction when on carpet mode, suction is perfect when upright (hose). The suction lasts for appox 5 mins when on the carpet and it stops.


... Miele Vacuums

Miele vacuum bag holder replace - Miele S7280 Bagged Upright Vacuum


... Miele S7280 Bagged Upright Vacuum

Miele airflow indicator Miele S7280 Bagged Upright Vacuum issues


... Miele S7280 Bagged Upright Vacuum

Upright will not stay in position - Dyson DC40 Animal Ball-Technology Upright Vacuum Cleaner


... Dyson DC40 Animal Ball-Technology Upright Vacuum Cleaner

I have a new Dyson upright vacuum. The vacuum will not stay on. I used it a couple of hours ago with no problem, but now it won't stay on. It seems to be sucking and running normally otherwise. What can I do. Thank you. Donna Eakman


Hi Donna, My name is Don.\015\012\015\012When you say it wont stay on could you please advise the following:\015\012\015\0121. Does it cut out suddenly as you are using it?\015\0122. How long can you use it before it cut ... Dyson DC07 Bagless Upright Cyclonic Vacuum

I'm trying to get my S7000 Miele to stand upright an lock in this position. It wont , i tried to see if foot release was jammed but cant tell it doesnt seem to release to let it move upright an lock in again..help


There is a rear dust cover that sometimes gets stuck, this will make it almost impossible to lock the handle up. First locate the cover which is at the rear right above the wheels. It's about 2"x8" and ribbed vertically and slides up behind the rear ... Miele S7210 Bagged Upright Vacuum

Miele 600 warning light stays on - Miele Revolution 600 Bagged Canister Vacuum


... Miele Revolution 600 Bagged Canister Vacuum

My Oreck Upright will not stay upright! The handle falls over everytime I leave it stand on its own.


What you are in need of is what they call a detent. There is a possibility that is has broken off from the housing which means that the only way to repair it properly is to replace the entire housing. It may have just had the screw come loose and h ... Oreck XL® Classic Bagged Upright Vacuum

When i hit the power button on my miele carina, it doesnt lock and stay on. i have to hold down the power button for the power to stay on. Please advise


Try a little WD-40 sprayed sparingly on the button. work the button a few times- may be sticky spring or contact. if that doesn't work, check with retailer where you purchased it- see if you can get a replacement switch! if you're handy, or have a ha ... Miele Carina Vacuum Vacuum

My Oreck vacuum cleaner will only stay on in the upright position. If I try to recline it to vacuum, it shuts off...put it back up and it turns back on. Of course I can't vacuum in the upright position...what do I do?


It sound as if you have a short in the cord or it has come loose from the motor you can take it part by removing the four screws in the buttom of the base plate to see if any of the wires are loose. ... Oreck Vacuums

My Dyson DC17 Animal Bagless Upright does not click to stay in an upright position. It works but the handle falls to the floor.


This is a common fault with the Dyson DC07 (and other Dysons) unfortunately the clip that holds the handle upright hs broken. It can be repaired, but will cost a reasonable amount to have done... I would just live with the problem and prop the vacuum ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

My Dyson upright suddenly won't stay in the upright position. It appears that a little rubber piece has fallen out of position.


- Stand behind the vacuum cleaner and look at the right-hand side wheel\015\012- Remove the AI PIPE (it has two purple buttons that you push together to lift it up and out - it looks like a Tuba)\015\012- Lay the handle down and look for ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

I just got a Shark Bagless Upright Pet Pro V1310PT-FS and the power switch will not stay on. If you hold it down, it will turn on and the vacuum will pick up but the switch doesn't seem to stay in the "On position". Any ideas how to quick fix this?


... Vacuums

Miele S7260 wheel fell off - Miele S7260 Bagged Upright Vacuum


... Miele S7260 Bagged Upright Vacuum

Service Manual Miele - Miele S7580 Bagged Upright Vacuum


... Miele S7580 Bagged Upright Vacuum

How do we fix a broken upright stop? the upright stop will not stay up. something is not right.


Hi Jeremy! You may want to have one of our techs at a BISSELL Authorized Service Center inspect your machine.\015\012Here's a quick link to assist you in locating one in your area: ... Bissell 7950 ProHeat Upright Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0367 seconds