Having problems with your Miele Vacuums ?

I want to assemble a Miele HS12 cylinder vacuum cleaner

\015 Model HS 12 cylinder\015

Answers :

Repair Help & Product Troubleshooting for Miele Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I want to assemble a Miele HS12 cylinder vacuum cleaner


... Miele Vacuums

Hello, we have a Miele cat and dog turbo 5000 vacuum cleaner which we bought in December. It has just started blowing air out of the grid on the top of the cleaner instead of sucking from the tube. The whole top section which is opened to change the bags doesn't seem to want to clip down properly either. Do you have any ideas> I'm gutted as it was so good until this happened. Thanks Michelle.


The lid not closing properly is almost certainly the cause of your problem. Without that lid sealed tight to the body you will get no suction through the hose. So, the question is: why isn't the lid clipping down properly? Did you just change the bag ... Vacuums

My Miele hepa cylinder vacuum cleaner will not do anything. No sign of any power, I have checked the fuse in the plug and it's fine. Have only had the machine for a couple of years, any ideas?


... Miele Vacuums

I want a plan to connect a piece number 12 kc89vbzpz000 p.c.b. assembly to vacuum cleaner model 116.27650c Kenmore


... Kenmore Vacuums

I want to open a Hoover S3825 Elite Cyclonic Vacuum to see if I can repair or replace the cord reel assembly. Currently the reel slowly draws the cord back into the canister once it is pulled out. I found the mounting screws under the rear wheels once I removed the hub but I do not know how to remove the rear wheels, everything is plastic. The front screws are under the front caster wheels and I think I need to take a screwdriver and pry off the little cylinder wheel to get to them by rotating


... Vacuums

Took my miele canister vacuum cleaner in for repair because the cord had a break in it creating a short. He said it also needed an inter filter ($12.29) and the carbon brushes were worn out ($21.95). Is that possible? Also wanted to service the motor and put in a new seal ($49.95) Shouldn't that include the inter filter and carbon brushes?


Depending on the age of the vacuum and how much use it gets, the first two are possible. I would question the brushes as they should last for several years.\015\012The servicing is generally for labor only and doesn't include parts. I do reco ... Miele Vacuums

Vacuum cleaner I am needing to buy a vacuum cleaner - the flooring in our house is mainly oregon pine with loose rugs. I suffer from back problems and find the cylinder vacuums cause a great deal of back strain. I have been told that an upright vacuum is not suitable for wooden floors - I would appreciate any advice, particularly if u know of an upright vacuum cleaner that works well on wooden floors Thank you


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=517227&thid=728380\015\012Vacuum cleaner\015\012Posted by che9 on Jul 01, 2008\015\012I need to buy a vacuum clea ... Electrolux EL7055A Bagless Canister Vacuum

Difficulty to operate a vacuum cleaner on Smartstrand. I have a Miele which is a great vacuum cleaner. But it cannot move smoothly over this carpet. One's back is under stress trying to vacuum this carpet. The carpet is thick and luxurious and won't rot but it is hell to vacuum.


... Vacuums

I have LG V-3310 Vacuum cleaner of 1400 W. I want to know where will be the dust collected and how can i clean the vacuum cleaner.


Between the top of the carry handle and the body there should be a clip undo the clip open like a car boot take out and replace\015\012R.Carpenter ... LG Vacuums

Replacement Motor for a Miele S143 Vacuum Cleaner


Your vacuum should still be under warranty. If they dealer does not fix it for free call Miele directly. ... Miele S143 Bagged Upright Vacuum

Miele Champagne Vacuum Cleaner Model S548 I was using the vacuum as normal, moved locations so I plugged into another outlet & suddenly there was no power to the vacuum! I tried it in several other outlets, tried the reset button... & still no power to the vacuum. Any ideas what could be causing this? Any info would be greatly appreciated. Thank you!


Greetings from ,\015\012 \015\012This definitely sound like a cord reel issue to me. This is really the only problem that I ever see on a Miele vacuum cleaner. 9 times out of 10 the cord reel needs to be changed. If you purcha ... Miele Blue Moon Bagged Canister Vacuum

I have Wind Storm vacuum Cleaner. I need a replacement filter for it, but thier customer service number wants me to sign up for a membership with a monthly fee to have my question answered. Do nI just need to throw this vacuum out and buy a different vacuum?


If you search the interned for Windstorm Vacuum, you will find many complaints and a class action suit. If you received and like your vac, you are in a minority.\012I could find no parts.\012Gary ... Vacuums

Fitting a replacement locking button on a Miele upright vacuum cleaner


... Vacuums

How do I open Miele S571 vacuum cleaner


... Vacuums

Miele Flamenco II vacuum cleaner suction indicator not working


... Miele Vacuums

Cable not rewinding on Miele vacuum cleaner model s256i


... Miele S251i Plus Bagged Canister Vacuum

Miele S2511 Vacuum Cleaner Disassemble Question


My problem is with the power brush...I checked the belt and cleaned the rotating bar..still very low suction. The canister is still giving me plenty of power...thanks for any help ... Miele Vacuums

Opening Miele S28i Vacuum cleaner


If it is similiar to the white star you may find the instructions here useful: http://www.sannerud.com/house/miele.htmlhope so ... Miele S251i Plus Bagged Canister Vacuum

I have a kenmore canister vacuum cleaner, 4 yrs. old, model #116.27815701. The powermate assembly, the one for the carpet, seems to have a short or something. The light goes on and off and the motor


... Kenmore Vacuums

DIRT DEVIL VACUUM 4 MONTH OLD AND HOSE SPLIT TOOK BACK TO ARGOS TRIED TO INFER IT WAS MY FAULT ENYONE HAD THIS PROBLEM ? THE STRETCH HOSE SPLIT AND I HAVE NOT HAD THIS HAPPEN WITH ENY OTHER CLEANER THE SALES GIRL IN ARGOS SAYS THIS WAS MY FAULT . DIRT DEVIL VACUUM DDCYLBG5 BAGGED CYLINDER G TABERN.


From the Argos website... they must repair or replace or refund, up to 1 year. The squeaky wheel gets the grease, go over her head.\015\012 \015\012If there's a fault with the product...\015\012We've made it easier!\015\012 ... Vacuums

Dc07 problem I have a dc07 cyclonic vaccum and like this model,however, for some reason,it has been very dificult to push and pull for the past month or so. i have completely cleaned the brush assembly,cleared any obstructions in the hoses,and, cleaned the filter.I also checked the belt tension,wich i thought was fine but to no avail.Be advised that the brush assembly is spinning and suction is excellent. It just feels like the brush drags along the carpeting. this is a great vacuum cleaner and


The dyson uses two belts, one from the motor to a clutch and then from the clutch to the brush roller, the belts that they use are not much better then any other belt ( those you should change yearly ) but you cant just change the belts you have to c ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

Miele Direct Connect Powerbrush assembly? - Miele S514 Solaris Bagged Canister Vacuum


... Miele S514 Solaris Bagged Canister Vacuum

Is there a Miele Turbobrush to fit my Miele Vacuums cleaner model S274I


The STB205-2 is the turbobrush for that model. Here are a few links to some websites that sell them.http://www.centralvacuumstores.com/item.php?id=4557http://www.amazon.com/Miele-STB205-2-Turbobrush-S500-S600/dp/B0017PNLC6/ref=sr_1_5?ie ... Miele Vacuums

Vax C91-P5-P Power 5 Pet 2400w Cylinder Vacuum Cleaner DO YOU KNOW HOW TO SET UP THE VACUUM ABOVE TO CLEAN THE CARPET PLEASE


... Vacuums

How to dismantle a Miele S 5980 vacuum cleaner. The RESET switch has fallen in and I can't remove the plastic panel to replace it. Neither can I remove the cleaner body to get in from beneath. I have removed 2 screws from the front of the barrel (nozzle end), one screw centre front, two screws towards rear, but there seems to be something else holding the housing together. [email protected]


... Miele Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0856 seconds