Having problems with your Mint Plus Turbo Charging Cradle ?

Mint Plus Turbo Charging Cradle won't function properly

\015 Trying to use Mint Plus with the Turbo Charging cradle. At first I get the slowly blinking red light, indicating that it's charging. Soon after, I get a series of six quick unhappy beeps and the Mint Plus unit flashes the three red dots. The turbo charge cradle has the solid blue light the whole time.\015

Answers :

Cradle and contacts are fine. Cradle circuit is nothing but a reed relay and few wires, relay closes on proximity to robot's body, therefore no voltage on contacts before robot is close to cradle.
There is a thermistor inside of battery, and mine was bad. I removed it and now I am charging the battery from my bench power supply at about 220 ma current, overnight, and it works. Probably the solution is to get a new replacement battery, but the one with the thermistor inside (OEM), easily recognized by the third wire, and all should be fine, assuming that nothing else is wrong with charging circuit or power adapter (12v/1A)
Hope this will give you some ideas of where to poke.
Once successful, please post your solution.
The Mint needs to be reset.Place Mint on charger and press the on/off button and the mop/duster at the same time. After pressing all three you will here a buzz, the alarm should stop and the red light will go on, indicating the Mint is charging. If the alarm goes off reset again. You may have to do this 3 or 4 times. Keep it charged to avoid this issue.
\012
\012
\012
Repair Help & Product Troubleshooting for Mint Plus Turbo Charging Cradle

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Mint Plus Turbo Charging Cradle won't function properly


Cradle and contacts are fine. Cradle circuit is nothing but a reed relay and few wires, relay closes on proximity to robot's body, therefore no voltage on contacts before robot is close to cradle.There is a thermistor inside of battery, and mine ... Mint Plus Turbo Charging Cradle

FOR dlh2457: Just came across your post to another person's dilemma. I found this Baby Lock BL4 428 serger at a thrift store. It powers on but I know nothing about its use. I don't want to spend $14 plus for an owner's manual and find out this machine does not function properly or possibly damage it by improperly threading it or having it out of adjustment. I'm in need of an owner's manual for a Baby Lock BL4 428. If that offer is still good I'll take a "copy" of it and will compensate you for


I've found it , it costs 9.95$ , together with shipping it will cost 15.93$ at your doorstep.Bit more than 14$ but that is th cheapest one.Symply ... Vacuums

Mint plus charge - iRobot Vacuums


... iRobot Vacuums

I have an electrolux cyclonic vacuum and turbo head wont work properly keeps losing power ?


... Vacuums

The tank wont re attach properly - Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum


... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Our roomba 560 wont charge have replaced the battery Tested the charing unit with another roomba that all seems ok put the uncharged battery into another Roomba but im guessing it now has a memory as this wont charge in the other hoover. Any ideas what may be wrong


Try cleaning the battery contacts with a little rubbing alcohol or contact cleaner on a foam swab, or a bit of paper towel. Take a litle time, it doesn't always dissolve instantly. (Don't use a pink pencil eraser, it would scrub off the plating that ... iRobot Roomba 560 Robotic Vacuum

Wont charge new roomba for xmas. lights on charging unit both flashing but no power in roomba. it worked yesterday when i got it out of the box and did a full clean. i feft it on charge over night ready for the clean today but when i got up no power atall please can you offer a solution. i have held down pock and start - no joy. i have checked the battery connections - no joy please help many thanks caroline


Did you try plugging in 560 driectly to charger then run it? ... iRobot Roomba 560 Robotic Vacuum

I am currently unsure, it my Dyson DC16 battery is charging as it should. I read all the posts about Powersupply voltage of 28V and defective PCBs. I now need to know from someone who's DC16 is working properly what voltage the battery should have when it is charged. I currently only measure 24.2V in mine. Supposing there are 6 batteries in there with nominal 3.6 voltage each, which would add up to 21.6, I supposed one could charge with up to 25.2V (4.2*6) and once reach lower the voltage ke


Does it stop working real fast ? ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum

Error 5 will not charge says error5 charged it for 24hourswith 3 seperate baterrys green light to say its charged but wont go ive cleaned it to death but no joy help alan


Try this linkhttp://uksupport.irobot.com/app/answers/detail/a_id/883/related/1/?cc=uk ... iRobot Roomba 560 Robotic Vacuum

Roomba Red shows pulsing red charging light, turns green, measured battery voltage - only shows about 5.5 volts. Borrowed and used neighbor's charging unit - same thing happened. It seems that the charging system inside the Roomba Red is not functioning. WShat else can I try?


... iRobot Roomba Red 4100 Bagless Robotic Vacuum

It starts very briefly and then the red light flashes. It stops as if there's a problem. It is all clean and fully charged. WE were wondering whether it wasn't charging properly, just an idea. We don't know.


I have the same problem,any solution? ... iRobot Roomba 530 Robotic Vacuum

My machine wont sew properly I broke the needle awhile ago and now it wont sew propery was hoping a manual would tell me what is wrong


Your possbly out of time ,meaning the machine isnt in synch after such a big event. check the website for putting back in time otherwise ,disconnect it off the drive and try and put it whare it needs to be ... Vacuums

I have a stanley hid0109 flash light but it wont show the main light. i charged it and still wont turn on instead the red light on the back flashes.


... Vacuums

I have a Pfaff 7570 ... having a problem with the upper thread making a small loop just above the fabric by the eye of the needle, just before the tip of the needle is piercing the fabric, the stitches that produced are properly formed with the right tension, but the loops get in the way sometimes and I know it never used to do this before. After reading the service manual I'm suspecting the "thread check spring" is not functioning properly. The manual gives steps how to adjust it, but it d


Http://search-pdf-books.com/pfaff-creative-7570-sewing-machine-pdf/ ... Vacuums

When put roomba on charger-the charger fades in and out but doesnt charged. cleaned the points still wont charge


You have dead nimh (nickle metal hydride) batteries.You\012will need a ... Roomba Robotic Floor Bagless Vacuum

Roomba 4106 new battery charged but wont start


See the diodes, resistor, capacitor inside for test. since the battery is new, the power charger is faulty, power regulator IC is bad.God bless you ... Roomba 3005 Pro Robotic Vacuum

Miele vacuum turbo plus brush does not rotate


Hi Jeanakemi10,The front brush motor will not engage until the power is turned on and\015\012the handle is in the down position. In the upright position the brush\015\012motor wont engage. Typical faults will be the belt is broken and nee ... Miele S318 Bagged Canister Vacuum

Miele power plus brush model seb234/236 won't work and telescoping wand wont stay xtended


... Vacuums

My neato wont charge


... Neato Vacuums

Roomba 4220 light says charged but wont turn on


Try resetting to reset the charging system. You can do this\012 by removing the battery from the robot and unplugging the charger from \012the wall and robot. Please hold the power button down for 30 seconds. \012You then should charge the ro ... Vacuums

Seems to charge but then wont come on


Sounds like you bought a defective batteryYou can test for this by removing the battery\012and holding the power button for 15 seconds. This will restart the\012charging cycle as if the battery were new. If it still goes red get a refund and a ... iRobot Roomba 4105 Bagless Robotic Vacuum

Roomba Discovery series wont charge


... iRobot Roomba Discovery SE Bagless Robotic Vacuum

Air powered turbo brush on shark navigator wont rotate


... Euro-Pro EuroPro Shark Navigator Vacuum

Dyson dc25 wont lean back properly


... Dyson DC25 Vacuum

Noisy vacuum that wont pick up properly


Your vacuum is still under warranty. Call Miele or the Miele dealer you bought it from. They are obligated to repair your vacuum. ... Miele S4210 Carina Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0387 seconds