Having problems with your Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum ?

Purchase the Relay for the model 550 and which goes where

\015 As is usual when a friend brings you over something to look at for them, after they been through it, you can try to give them a look, that just says.....please, maybe next time, just bring it here first... Sometimes you just want to slap 'em..not that it would change anything.. Hi, my name's Dean, and I own/operate my own appl business northern ca..... case in point above... ended up when backed off the metal plate on the relay and the coil wire has overheated and broke at the weld to the spade term.. the wires were not attached and looks like 4, 3, and 2..... are used on the Relay.... If someone would be so kind as to direct me further, It would be greatly appreciated... thanks in advance for the help\015

Answers :

Hope this helps:
Repair Help & Product Troubleshooting for Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Purchase the Relay for the model 550 and which goes where

Hope this helps:\015\012\015\012 ... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

I have purchased a lumina steamer model sc-306 with out manual and i do not know where to put the water, i feel stupid i have looked all over the steamer and can not find where it goes

... Vacuums

I purchased a used Roomba 550 off of Craigs List and got it home and it just goes in circles. Am I doingsomething wrong? I used to own a cheaper model and it worked fine until it finally gave up the ghost.

... iRobot Roomba 550 Vacuum

Can't find info for hoover steam vac spin scrub model # F5905900 on Hoover website, doesn't show that model number at all...looking for mesh (kind of cone/cylinder shape) that goes in dirty water tank (I think) and also the tool (wand) that slides into front to clean it out. It doesn't pull all the water up very well and the filter has been missing for some time. I don't know if that has anything to do with it or not. As far as the wand tool goes, I have taken the cover off at this point and

The cleanout tool is part # 43514001. The filter is # 90001398. Be sure to leave a 1/2 inch gap between the top of the filter and the bottom of the lid. If you need a manual, try model F5914-900 0r F5912-900 on Hoover.com ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Self propelled vac: goes great on hard floor or hard slick carpet. Goes backwards fine but will not pull itself forward very well. Requires some effor to push it forward. I have adjusted the cable so the lever on the motor goes as far forward as possible. Suggestions? Model U6446-900

Dear Nasherrill,\015\012\015\012I've found a friend! I thought I was the only person in the world who owned the Hoover Model U6446-900! This model does not appear on the http ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

I just purchased a rainbow D4C, after purchasing i was told i should have purchased the SE model. whats the difference?

There is only one difference between the D4 and the D4 SE, which stands for D4 (Special Edition). It is the exhaust plug screws in on an SE and snaps in on a regular D4.\015\012\015\012Then the SE-PE came along, which stands for (Special ... Rainbow 75th Anniversary Canister Vacuum

SEARS KENMORE CANISTER VACCUM, Model No. 107-23050, Volts 120AC, Type AV, Hertz 60, Amps 11: This is a small model vaccum with an on/off switch on the canister. The on/off switch has gone and the vaccum can only be used by plugging and unplugging it. I am looking for the replacement on/off switch part but Sears Kenmore has no listing for this vaccum or parts. I can't recall just how long ago it was purchased but could be 10 years (or more). As this model is perfect for the application neede

... Vacuums

Trying to purchase an Emerson microwave splatter shield replacement part. Cannot find a vendor to purchase from. MODEL #MW8992RD


I have a Euro Pro Compact Performer model # EP 171 which I love. It is the best iron I have found for my quilting class. When I went to use it, I found my cats had chewed the cord to the point that it is unsafe. I took it to a repair shop to have a new cord put on it and they told me it had to go back to the factory. I do not want to purchase another iron because it is my understanding this model is no longer made and because I love it. May I send this iron back to the factory to have a new

Hi, you may already have found a solution, but I recently saw this same model iron on ebay! ... Euro-Pro Vacuums

My Oregon Scientific BAR888 has 5 windows, 1. temperature, 2. humidity, 3. mb/hPa or inHg (switch at the back), 4. bars showing pressure changes over 24 hours, and 5. time/date. Window 3 gives an option to set something between 0 and 2500. Oregon say they only have one set of instructions for the BAR888 but they do not match my instrument as there is nothing included for my window 3. Trouble is I don't know what the 0 to 2500 relates to and therefore don't know what to set it at.(My model does n

... Vacuums

Just purchased a floor model Kenmore Progressive vacuum 2009 Model... no instruction manual was available at the store. Where Can I get one

Hi There,Here's a link to the owners manual for the Kenmore upright which this question was listed under, the 116.35913. You can find the model number on the back or the bottom of the machine on a sticker that also contains the serial nu ... Kenmore 35912 / 35913 Progressive Upright Vacuum

After many years of faithful service our Electrolux Cyclone Power Lite Model Z410A (motorised brush roll). has come to the end of its life. Questions:- Is it now obsolete ? If so can you recommend a similar but suitable model we can purchase ? Regards Peter Downs

... Electrolux Vacuums

Model # zw5000y8 The air conditioner is less than 2 years old, and has leaking water from the from of the air conditioner. I contacted Home Depot where I purchased the item and the only advice they could offer was that there was something wrong. I purchased two of the same air conditioner and I havent had any issues with the other. Can someone please offer any advice on the reason that the air conditioner is leaking from the front and filling up with water, not the normal condensation,

... Vacuums

This fan is the Aloha Breeze 16inch Vintage Stand Fan made in March of 2010. Serial# 02299 model # 46052(46051) purchase order # 2082395186 UPC # 759590460526 it is the heavy chrome model. We have owned this only 3 months and it just quit working. No symtoms, no pre-warning, no smokeing, it just quit. HELP

You are still in the warrranty period of one year and it is most adviceable not to tamper it so as to lose the priviledge.\012So please get in touch immediatley with your dealer.\012Only If there is no help do you need to open the base an ... Vacuums

I purchased a bissell model #6583 and it did not have a owners manuel and i am confuded about the filter instalation can you show me where to get this on the internet for free since it should have been in the box upon my purchase,(and was not there!) I feel I have already paid for it once,and some what cheated, or at least e-mail me the instruction part of proper filter use. Thanks, Shirley

Go to http://www.bissell.com/powerforce-bagless-vacuum/. On the right side of the page, under "Downloadable Documents", click on "User Guide - English". ... Bissell Vacuums

Many years ago I purchased a fantom canister vacume - model # fm709k. K mart no longer has the replacement bags for this model. What can I do?

You can find the bags right on their homepage\015\012\015\012http://www.fantom.com/fa ... Vacuums

Model UH70120 Hoover Wind Tunnel T Series Rewind Model UH70120 purchased at Target - bagless How can I put on the new Belt? I have taken it apart but cannot figure out how to change the belt. How?

... Hoover UH70120 WindTunnel TSeries Rewind Bagless Upright Vacuum Cleaner

I purchased a hoover windtunnel 2 model#u8361900 in Dec 2007.I am very disappointed because the self cleaning filter is not turning and particles keep clogging in that area. I have manually removed the particles but the filter will not turn.I also haven't been able to use the pet brush for some time.The cleaner has not been used hard about once a week since it was purchased.I am not happy that this product has stopped working effiently since purchased 6 months ago. Thank you Marcia Long Pottstow

The filter stands up right.the bottom goes in first then snap in the top.turn it by hand and you should hear it click if you have it in right ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum

Help Hi I have had my irobot roomba model 4000 now for 3 months now, I just LOVE it sooo much. I have used it everyday since I got it. But now it is not working. I cleaned it all out I even sprayed it with that air spray can. What happens is, It starts to go then it acts like there is something in the way and stops then goes the other way, then goes off. What is wrong? Please help!!!

I had the same kind of problem with my model 400 today...after starting it and having it go in a circle for 30 seconds or so it would finally run into something and then back up a few inches, turn, then go forward a few inches, then back up a few inc ... iRobot Roomba 4210 Bagless Robotic Vacuum

I have a Hoover self-propelled windtunnel, purchased 6-04. It gets light use. I have replaced the v belt 3 times, once under warranty, and it must be replaced again. It appears to be in very good condition, but is stretched too big. When I purchased 2 v belts a year ago, one was already too stretched,but when my Dad took it back, the salesman put it on another model and said it was fine (Dad never mentioned this to me). Is there a way to adjust the vacuum to hold the belt tighter? Do they re

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=675093\015\012Generic problem for all Vacuums\015\012I have a Hoover self-propelled\015\012Posted by kl ... Vacuums

Dear Sir: I just purchased a Bissell Rug Shampooer at a garage sale. The only thing I find for a model is on the back and it says Model 1695 there. Nothing on front. It is Navy blue and has a grey tank on it with a smaller one inserted at bottom of the large tank. It has two switches on the back of it and the trigger switch at the handle. The cleaner works, BUT, it does not extract any water back into the tank that is to pick up the dirty water. Could you suggest what I may look at t

... Bissell Vacuums

I want to purchase a wall mounting bracket for Sharkvac model SV70Z N cordless hand vacuum. Where can I purchase this optional bracket?

... Vacuums

Hi i purchased a bissell model number 2080-Q and managed to loose all the paper work that came with the model. i really need to use this today and would just like to have you give me help with that

You might try bissell.com and see if you can download a user manul. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

Belts I have a Hoover self-propelled windtunnel, purchased 6-04. It gets light use. I have replaced the v belt 3 times, once under warranty, and it must be replaced again. It appears to be in very good condition, but is stretched too big. When I purchased 2 v belts a year ago, one was already too stretched,but when my Dad took it back, the salesman put it on another model and said it was fine (Dad never mentioned this to me). Is there a way to adjust the vacuum to hold the belt tighter? Do t

It is the flat belt that gets stretched and should be replaced at least every 6 months. The V belt wears down so it won't it right in the brush roll V. Maybe the belt tensioner wheel has a problem, sometimes they get hook up and won't engage the V ... Vacuums

I have a Hoover WindTunnel Bagless Vacuum Cleaner, Model #U5753-900, Serial number 110600215585, which I purchased from Loew's on 3/31/07. With it, came a Hoove Slider for hard floor surfaces, Model #S2105, Serial number 050500084989. The Slider strted making a noise--I thought something had been caught in the roller, but discovered, it had not; so I and my husband proceeded to take the Slider apart. I believe one of the belts had come off; but when we took the screws off the bottom to check

... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0773 seconds