Having problems with your Oreck XL21 Bagged Upright Vacuum ?

My oreck practicly sticks to the floor.

\015 Am I doing something wrong? \302\240I try to push it across my carpet but it resists my efforts to the point I'm ready to junk it.\015

Answers :

Replace your belt by removing the screws from the baseplate, removing the baseplate and brushroll, and hooking the belt around the silver metal motor pulley. Then put the belt on the pulley side of the brushroll, and pull the brushroll back into its home in the front nozzle, ensuring that the brushroll ends are oriented the same direction. Spin it to ensure that everything spins freely, and then replace the baseplate. Party.
\015\012
\015\012-R
Make sure that the wheels are not bound up with hair and thread and change the belt.
If you have deep shag or frieze carpeting then this is the best it will get.
Repair Help & Product Troubleshooting for Oreck XL21 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My oreck practicly sticks to the floor.


Replace your belt by removing the screws from the baseplate, removing the baseplate and brushroll, and hooking the belt around the silver metal motor pulley. Then put the belt on the pulley side of the brushroll, and pull the brushroll back into its ... Oreck XL21 Bagged Upright Vacuum

Why does my Oreck drag on carpeting? bought an Oreck upright 4.8 bagless at a garage sale. Great on the kitchen floor but seems to drag , difficult to push on the commercial carpeting. any hints


... Oreck Dual Power Electric Floor Sweeper Bagless Upright Vacuum

Oreck steam mop not very hot - Oreck steam-it Stick Vacuum


... Oreck steam-it Stick Vacuum

The bottom bar that encases the brush is flush to the floor when using the vacuum. This causes the suction to "stick" the vacuum to the floor (lamenate) and also as there is no ground clearance debris is just pushed around. We have to nearly stand the thing upright to get the ground clearance to be enough for things to start being sucked up. I have taken apart, re-assembled etc and nothing is working.


I'm having the same problem.  The bottom plate is not level with the floor unless the vacuum is nearly in the upright position.  Its like there should be a spring pushing the bottom plate towards the floor.  Anyone know how to fix this ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Oreck orbiter stopped working - Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum


... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

Oreck steam it steam100lrh is model steam coming out the top of floor attachment, not on floor.


... Oreck steam-it Stick Vacuum

Take fly wheel off of a oreck orbiter - Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum


... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

My oreck steam mop is not steaming - Oreck steam-it Stick Vacuum


... Oreck steam-it Stick Vacuum

Oreck vacuum leaves brush marks on hardwood floor


... Oreck XL Ultra Bagged Upright Vacuum

The metal plate at the front of our X4 Extra has been damaged from nail heads on timber floors and although we have straightened it, we now need to replace it. We have ordered the part but cannot see how the plate comes off. We are reasonably practical and should be able to do it if someone can provide some guidance.


... Sebo X4 Bagged Upright Vacuum

My new oreck magnesium upright is making a black marks on my hardwood floor. what should i do?


... Oreck XL2200 Bagged Upright Vacuum

Loose handle on shark v1950 sweeper - Shark Euro-Pro V1950 VX3 Rechargeable Stick Broom Sweeper, 13" Motorized Brush Roll, Folding Handle, 2 Speeds, 50 Min Cleaning, Carpets & Floors


... Shark Euro-Pro V1950 VX3 Rechargeable Stick Broom Sweeper, 13" Motorized Brush Roll, Folding Handle, 2 Speeds, 50 Min Cleaning, Carpets & Floors

Oreck Dual Power Electric Floor Sweeper Bagless Upright Vacuum replacement for filter over the plastic


Dear Sir:Please follow the instruction from your section troubleshooting from user manual. or go www. fitness.manualsonline.com or www.retrevo.com or go to directly to the company from the Vacuum. and follow steps.God bless you ... Oreck Dual Power Electric Floor Sweeper Bagless Upright Vacuum

Instruction manual for Vax S2 Hard Floor Master Upright Steam Stick


... Vacuums

Dyson slim stick keeps turning off - Dyson DC-35 Digital Slim Cordless Multi-Floor Vacuum - -


... Dyson DC-35 Digital Slim Cordless Multi-Floor Vacuum - -

I need to know what the RPM is on the Oreck Orbiter XL550 floor machine?


... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

Not enough steam coming out of my steamer - Oreck steam-it Stick Vacuum


... Oreck steam-it Stick Vacuum

How do I put my Oreck Cord-Free Electrikbroom, Quick Stick back together?


... Oreck Electrikbroom Bagged Upright Vacuum

HELLO I have an Oreck Orbiter Floor Machine, It makes a lot of noise. I seems like one of the side screws fell out. I did not see this happen. Nor did we see any loose hardware. My question is - How do I take it apart... to inspect inside. thanks SUsei


... Oreck Orbiter Floor Machines ORB-500, ORB-550, ORB-600 Vacuum

Oreck xl the vac will not pick up anything on my hardwood floors. It just pushes it around yet the brush is spinning.


Sounds like the Oreck is clogged. You'll have to undo the bag by the way of the clip in the middle at the back of the main black spindel neck and then at the bottom. Then take apart the main neck by pushing the rubber mounts upwards to release the pi ... Oreck XL2200 Bagged Upright Vacuum

My Oreck has in the last 2 weeks become very hard to push on carpet , ok on bare floors. Thanks


Look at 3 things:\015\012(1) is there something wrapped around the rear \015\012wheels or axles?\015\012(2) Is there something wrapped around the small, front wheels or axles. (not likely this is the culprit.)\015\012(3) Is yo ... Oreck XL2000 Bagged Upright Vacuum

Oreck does not have good suction and leaves lint on rugs, and floor---any solutions?


If it has been longer than 6 months I woulf replace the belt. Wile doing that look to the rear of the vacuum and the side chute and make sure you do not have anything plugging those entrances. ... Oreck XL2200 Bagged Upright Vacuum

Battery does not charge - Oreck PR8000 Stick Vacuum


These batteries are nickel cadium so they do not recharge foever\015\012replace the rechargable batteries to get this working for you ... Oreck PR8000 Stick Vacuum

I have an Oreck XL Platnium. It smells like burning rubber and the brush roller binds and stops as you pull it back and forth, even on a hard floor. I have changed the belt 2 times. I have taken the brush roller out and checked it. It seems to be spinning freely. What could be wrong??


... Oreck XL Ultra Bagged Upright Vacuum

Oreck xl commercial spits out dust on bare floor but work on carpet. It is about 15 years old. Bag has been changed. Brushes are spinning so belt is working. Started about 2 weeks ago. HELP!


It might be that the beater brush is spinning when you tip it up to look at it but slight pressure of it contacting the floor is enough to stop it.\015\012If it were my machine I would remove the beater brush and clean it as best I could, paying part ... Oreck XL Ultra Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0283 seconds