Having problems with your Oreck XL2600HH Upright Vacuum Cleaner Upper Handle Tube Upright Vac Cleaner Upper Handle Tube ?

Xl2600hhvacuum won't stand alone anymore, what is broken, is it a spring or some kind of catch missing

\015 It just falls over when I try to stand it up, something has broken or has stopped working.\015

Answers :

The detent that is mounted to the inside of the base cover is not working either because the screw holding has broken off or it is worn out. You could also have a worn out fan housing since that is what the detent catches to make it stand up. If the screw is broken off the only way to repair it is to replace the housing. Hope this helps.
Repair Help & Product Troubleshooting for Oreck XL2600HH Upright Vacuum Cleaner Upper Handle Tube Upright Vac Cleaner Upper Handle Tube

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Xl2600hhvacuum won't stand alone anymore, what is broken, is it a spring or some kind of catch missing


The detent that is mounted to the inside of the base cover is not working either because the screw holding has broken off or it is worn out. You could also have a worn out fan housing since that is what the detent catches to make it stand up. If th ... Oreck XL2600HH Upright Vacuum Cleaner Upper Handle Tube Upright Vac Cleaner Upper Handle Tube

My bissell brush band has come off and wont stay on thus the brush will not turn, there is also a black arm type thing on a spring inside (on both sides) on the pump belt side it has broken - the side where the brush belt is, help im searching for parts and a way to fix it but im getting no joy, incidentley the brush belt thickness looks way to thick for the small thickness for the brush belt cog (?) to stay on........am i missing something? so i need to get the arm thing replaced plus find a


... Bissell ProHeat Deep Cleaner Upright Vacuum

Broken spring loaded latch on stand that holds mixer to stand


What is your make and model and I'll find a website where you can either order a new spring or find out how to fix it, or both.Thanks,Handie Andie ... Vacuums

Broken Dyson Our Dyson will not stand upright -- it falls flat on the floor as if the catch that keeps it up is broken. Any ideas for a quick fix before I send it in for repairs? Thanks, Please send any responses to; [email protected]


Hi, I went to the Dyson site, searched for the problem AND found the solution -- to hold a button while lifting the rear of the machine up and it clicked back into place. I knew there was a button somewhere but there are soooo many buttons!!\015\012\ ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Sew- Prow Sewing machine Model ZZ- 401 need diagram to order part and manual. Has broken missing parts in spool area spool wont stay in under needle Davy B


Hi!!\015\012\015\012Try this sites\015\012Hi!\015\012\015\012It seems that this is a common problem for this machine. I think you will be better off getting a new machine for $50 at this site\015\012 ... Vacuums

Spring loaded valve under the detergent mix system is broken or missing some part that holds it in


... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

I Have a hoover purepower 1800w upright vacuum cleaner that works perfectly except for it wont stand upright anymore. Any advice


Not sure what model of Hoover you have, you may need a new handle release. ... Vacuums

Vacuum doesnot stay upright. Is the pedal broken or missing a spring or something?


... Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue

Hoover savvy handle release pedal does not retract. There does not seem to be any mechanism to force it back, is something broken or missing, like a spring?


Yes the handle release pedal is broken. i have the same problem and ordering the spare as i'm writing this email ... Vacuums

Dyson 18 wont stand


Check this video out ... Vacuums

I am replacing a foot pedal on an upright Sharp vacuum cleaner-EC-TU2607. I have the broken foot pedal removed from vacuum cleaner proper but it is the removal of the broken pedal from its spring load that has me puzzled. I applied some pulling effort on the pin that holds the spring in place but there doesn't seem to be any give. Is that the correct approach or is there something else that one should be doing first to release some of the resistance by the pin or spring? Thanks!


... Sharp Twin Energy EC-TU2607 Vacuum

Bissell 3595 handle release pedal spring(?) missing


I just fixed this on my Bissell PowerForce model #6594 vacuum myself. Woo Hoo for me. :-)\015\012\015\012I called the local vacuum repair guy and he told me he'd repair it for me if I insisted but that since my machine only cost about $80 ... Bissell 3522 PowerForce Bagged Upright Vacuum

Shroud release catch broken on dyson dc07


... Dyson DC07 Bagless Upright Cyclonic Vacuum

Conair does not sell the springs for their curling iron. Mine keep breaking and I do not want to keep buying a whole new curling iron just because the wire spring has broken. Instant Heat curling iron, model number CD8sWCS. Do you know where I can buy these springs or how I can improvise with something that will work almost as well?


Hi,\015\012\015\012The best thing I know of is to take a wire bread bag tie....take the paper off of it so that you just have the wire part... twist this around the two ends of the wires where it broke...this will contect the two wires an ... Conair Vacuums

Need part for stand of Hamilton Beach Scovill Model 44 Mixer. Part is locking rocker tab that hold mixer in place on stand or press to remove mixer head from stand. Don't need spring or pivot pin, just rocker tab. Don't have part number.


... Vacuums

Shark Euro pro mop the ligt wont turn on anymore.


My husband fixed my shark steamer by taking it apart and testing it wire by wire .the problem ?a fuse hidden inside the unit..unscrew the screws and get inside the steamer .at the bottom of the steamer there is a gold orange foil looking piece .under ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Broken Belt Trouble and also plastic piece with spring has a broken part


You can order new parts through Bissell.com web site they are very hepful ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Brushes stopped The brushes stopped turning while using the cleaner. I removed the brushes to see if the spindle was broken, it wasn't. I then removed the top plastic cover and checked the switch that engages the brushes; it didn't seem to be moving correctly. There's one spring on the switch - should there be two? Or do you think something has broken on the inside? Thanks for any help


Most likely the turbine is bad, it may just be clogged up, you can take it apart and clean it out real good. That may work, but it may not. Sometimes it is best to replace the turbine. ... Hoover F7431-900 SteamVac Vacuum

I have had pfaff 1037 tipmatic machine since 1999. Have been servicing it regularly. Unfortunately, the wheel, which you loosen when filling the bobbin with thread,has broken. I mean the screw which holds the spring has broken. Where can I get a spare part. I asked for the whole machine photograph so that I can tell you exactly which part I mean as unfortunately I do not have a manual for this model.


... Vacuums

My Dyson DC25 got stuck and wouldn't return to the upright position, I figured out that one side had jumped the track and gotten stuck in the square hole below the track. I did not want to break the plastic to force it back, so I removed the screw on the right side that was holding the kick stand on and removed the kick stand, also a spring thing came out. Problem is, now I have no idea how to re-install the kickstand. Can't find a technical manual or video anywhere, it can't be very difficul


... Dyson DC25 All Floors Bagless Upright Vacuum

Having cleaned my De Longhi Treviso after storage I am at a loss as to why, when the machine turns on steam escapes from the outlet. It seems as if there is something missing from the pressure vessel behind the spring. Is there anyone who has a schematic diagram where I can ascertain what, if anything has been lost/gone missing.


... DeLonghi Vacuums

I have Optima, 12amp Eureka vacuum, Model 431, AXZ type and the extension hose for cleaning corners and edges --the plastic part that the attachments fit into has a piece broken off and tools don;t fit anymore. It looks like the hose attachment can be replaced--can it be and if so--where can I get a new hose attachment. It seems it is cheaply made of plastic and really shouldn't have broken a piece off.


... Eureka 431A Optima Bagless Upright Vacuum

Scuncii Steamer wont work wont blow steam anymore


It is probably clogged with rust or limescale - can happen with steam cleaners. Sadly there's no way around this but to try a limescale remover in distilled water such as Calgon limescale remover. Fill the kettle as normal and give it time to boil up ... Scunci 52067 Handheld Steam Vacuum

I have a bissell 92002 proheat steam cleaner and for some reason it wont spray anymore or ****... the moter goes and it dont smell or anything but the water just wont come out


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

My dc14 wont stand vertically, it stands slightly leaning backwards?


Hello,There is usually a stopper that you step down on to bring it down, its stopper should be loose, or needs to be replaced. ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0527 seconds