Having problems with your Oreck XL Ultra Bagged Upright Vacuum ?

Oreck upright handle falls over

\015 My Oreck upright handle falls over and will not click into a hold position as it used tol\015

Answers :

Repair Help & Product Troubleshooting for Oreck XL Ultra Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Oreck upright handle falls over


... Oreck XL Ultra Bagged Upright Vacuum

My Oreck Upright will not stay upright! The handle falls over everytime I leave it stand on its own.


What you are in need of is what they call a detent. There is a possibility that is has broken off from the housing which means that the only way to repair it properly is to replace the entire housing. It may have just had the screw come loose and h ... Oreck XL® Classic Bagged Upright Vacuum

Oreck Upright Hi Redev, I'm not sure what model I have (about 6 years old...upright, looks like the one in the picture). I changed the belt (which was torn) and then the next time I used it, it cut off on me. Now if won't turn on at all. (I turn the switch on and off and nothing happens as if it is not plugged in but it is!). I noticed at the top where the power cord enters the handle, it is all frayed. Could the electrical wires have detached? Anything you think I should check before taking it


The cord could be bad and will ahve to be replaced. It would have to have a problem inside the handle or down by the motor. ... Oreck XL2600 Vacuum

My Dyson DC17 Animal Bagless Upright does not click to stay in an upright position. It works but the handle falls to the floor.


This is a common fault with the Dyson DC07 (and other Dysons) unfortunately the clip that holds the handle upright hs broken. It can be repaired, but will cost a reasonable amount to have done... I would just live with the problem and prop the vacuum ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum

The metal rod inside the handle fell out when i separated the two handle parts to replace the square metal post/handle. I do not see a purpose for the metal rod or where it connects near the on/off switch. XL upright Oreck model.


It is like a static ground post your right it really dosent do anything ... Oreck XL2000 Bagged Upright Vacuum

Oreck xl21 loose handle - Oreck XL21 Bagged Upright Vacuum


... Oreck XL21 Bagged Upright Vacuum

Oreck XL Ultra Bagged Upright Vacuum Loose handle


... Oreck XL Ultra Bagged Upright Vacuum

The vacuum keeps falling over and won't stand upright. The vacuum won't **** from the bottom, only from the hose in the handle.


No Vacuum will work for more than a few weeks\015\012if you don't own an air compressor & blow them out\015\012after every 2 or 3 uses ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Regarding my Kirby Generation 3 upright vacuum cleaner: the handle does not lock into place, but rather falls to the floor. Any thoughts on how to get it to stay in place? Also, I lost my owner/operator manual. Can I download one to learn how to clean and maintain the vacuum?


The plate that catches the handle to lock has a hidden spring behind that plate.I would leave it alone for the unit is pressed together. Used ones are found most everyday on Ebay. The owners manual maybe found on this website\015\012\015\ ... Kirby Generation 3 Bagged Upright Vacuum

Oreck xl9100 runs okay when upright but when the handle is at an angle the motor stops


You must test the power cord for open or break use the VOM2) Test for main switch some wires loose, or bad solder, or switch defective, and replace.3) Thermal fuse, loose, or bad contact. tight.4) See if the belt is sliping or broke or wo ... Vacuums

The handle broke off what do I do? - Oreck XL2200 Bagged Upright Vacuum


We have that part available here. Just double check your exact model number, we also have the handle grips, screws and cords. ... Oreck XL2200 Bagged Upright Vacuum

Kirby heritage 2 handle wont stay in the upright posision keeps falling backwards


Two things; your bag may be too full and needs replaced. (it doesn't take much to make them top-heavy) or the pin at the back of the base of the handle is not extended. ... Kirby Heritage II Vacuum

How to open the handle of an oreck magnesium upright


... Oreck XL Ultra Bagged Upright Vacuum

How do you remove the handle to clean it? - Oreck XL21 Bagged Upright Vacuum


I am unsure why you would be removing the handle to clean it. It really is not necessary, but the handle grip is held together with 6 screws, take out the screws the two halves come off of the handle pipe.\012 \012 ... Oreck XL21 Bagged Upright Vacuum

Orek website diagram for wiring orek handle - Oreck XL Ultra Bagged Upright Vacuum


... Oreck XL Ultra Bagged Upright Vacuum

I have a hoover pure power 1700 vacuum cleaner and the handle will not stay upright it keeps falling back can you help please


... Hoover Vacuums

Reassemble of handle on upright


Place handle half with the posts that hold the screws facing up.\015\012\015\012silver pole with hole that goes completely throuigh goes over lower screw post (Long side) \015\012\015\012static wire - L shaped end goes in smal ... Oreck XL2200 Bagged Upright Vacuum

Placing the handle of my Dyson DC07 into its upright and locked position causes the beater bar to stop turning. It will not start turning until the handle is first lowered to the working position and the Carpet/Bare knob is moved to the Bare Floor position and then back to the Carpet position. Then the beater bar turns until the handle is placed into the upright position. What might be the problem?


Hi its Darran at Dyson.The brush control is designed to switch the brush bar off automatically when you stand the machine back into the upright position. It is designed this way to protect any delicate floor surfaces when you have the ma ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Handle won't stay upright


G3 has a handle return spring. Check to see if it is properly tensioned or broken ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

How to replace motor on oreck xl upright - Oreck XL Ultra Bagged Upright Vacuum


... Oreck XL Ultra Bagged Upright Vacuum

Replacement brush for Oreck ProPower Plus - Oreck Pro Power Plus Upright Vacuum Refurbished Refurbished Pro Power Plus Upright


... Oreck Pro Power Plus Upright Vacuum Refurbished Refurbished Pro Power Plus Upright

How to unclog the Oreck XL upright? - Oreck XL2200 Bagged Upright Vacuum


... Oreck XL2200 Bagged Upright Vacuum

Oreck XL Handle wiring


... Oreck XL Ultra Bagged Upright Vacuum

Oreck XL vacuum will no longer lock in the upright position.


... Oreck XL Ultra Bagged Upright Vacuum

Oreck upright hard to push - Oreck XL2000 Bagged Upright Vacuum


If hard to push, only a few things to check:\015\012\015\012(1) Rear wheels will get hair or thread wrapped around axles, dust, etc. and be hard to turn. Make sure each wheel turns easily.\015\012\015\012(2) Small wheels on ne ... Oreck XL2000 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0374 seconds