Having problems with your Panasonic Kenmore Canister Vacuum Vacuum ?

Kenmore whispertone 100 model 116. powerhead no

\015 Kenmore whispertone 100 model 116. powerhead no longer works. when vacumming it kept cutting out. when wiggled cord on powerhead it would go on and off, now nothing. is this fixable\015

Answers :

    \015\012
  • The motor / cord compartment cover must be removed to access the cord reel. There are four screws that hold the cover to the chassis. Two of the screws are found under the cord-retractor-foot-pedal on the top back of the canister. To access these screws the pedal must be removed. To do this, press the pedal down and look (from the top) for the four plastic clips that attach/hold the pedal hinges to the cover. There are two at the end corners and two in the middle. Using a long, thin flat-head screw driver (or similar instrument) press each clip to unhook/popout the hinges. Note: the foot pedal spring will also come out when the pedal is removed.

    The other two screws are found under the curved hinges of the vaccum bag compartment cover. To access these, lift the cover as if accessing the vacuum bag. Keep pulling the cover back until the hinges release from the motor cover. Don't worry, it is disigned to do this and will not break but it may require a little force. A long phillip-head screw driver will be needed to access and remove each screw
Repair Help & Product Troubleshooting for Panasonic Kenmore Canister Vacuum Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Remove cover on kenmore vacum model 116 - Kenmore whispertone 100 model 116


... Kenmore whispertone 100 model 116

Kenmore whispertone 100 model 116. powerhead no


\015\012The motor / cord compartment cover must be removed to access the cord reel. There are four screws that hold the cover to the chassis. Two of the screws are found under the cord-retractor-foot-pedal on the top ... Panasonic Kenmore Canister Vacuum Vacuum

How to replace kenmore 116 power cord - Kenmore whispertone 100 model 116


... Kenmore whispertone 100 model 116

Kenmore Whispertone Model 116 won't turn off, how to fix?


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Disassemblying kenmore whispertone 5.1 model 116 cannister vacuum


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Owners manual whispertone kenmore model 116 56500991C


... Electrolux Vacuums

Kenmore Whispertone model 116, 29512991


Unfortunatly what happens is the dirt that gets sucked up goes over the moter and ruins the motor. the fact that it lasted this long is suprising. the motor should be right behind the bag the only one that ive seen that isnt there is a kirby! ... Vacuums

How to replace motor on kenmore whispertone 5.1 model 116


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Kenmore whispertone model 11620412003


I am getting suction to the power mate, but the mate doesn't\015\012work. The belt seem fine, but the light and beater doesen.t\015\012go on. Tried the reset - no result. Thanks ... Vacuums

How to take apart kenmore whispertone 5.1 model 116


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Repair manual for kenmore whispertone 5.1 model 116 2385190


... Electrolux Vacuums

I have a kenmore whispertone 300, model 116 28612791, serial # DH0809803. I need to take the power head apart to clean it but can't figure out how. I don't have the manual for it. Is there a page of instructions I could print out? Thanks Lisa Coster [email protected]


... Kenmore Vacuums

Wiring the switch for a kenmore vacuum cleaner I need to know where teh different colored wires go. It had a short in it so I replaced the plug but think I wired it incorrectly. Its a Whispertone 300 model 116.28612790 The canister works but the beater bar doesn't.( it worked before a rewired the switch. Thanks


... Kenmore 23313 Whispertone Bagged Canister Vacuum

The power head of my 1165581590C Kenmore Power mate Whispertone 12 amp vacuum won't open. It is an older model and it desparately needs a clean!


I am not 100% sure of the model number but most of their powerheads come apart quite easily if you know how. There is a light lens cover on the top of your powerhead. On each side of this cover there is a little clip that holds it in place. You ca ... Vacuums

The vacuum is a Kenmore Whispertone model 116 328559OC Class CP-JR. I need a new small swivel wheel.


CHECK PARTS SITES AS THERE ARE NUMEROUS ONES ONLINE. ... Vacuums

I require the Old hose handle/end plug disassemble instruction for a Kenmore Whispertone model 116.20600001c


Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=575171\015\012Generic problem for all Vacuums\015\012I require the Old hose\015\012Posted by hrabed on May 06, 2 ... Vacuums

Problems with Kenmore Whispertone model 118 Bagged Canister Vacuum Overload Protection Reset won't reset


... Kenmore Whispertone 23312 Bagged Canister Vacuum

We have a Kenmore Whispertone Powermate, Model 116 29312990, Serial DJ2514178. I'd like to get an "owner's manual" or the instructions that came with it when new, which we have lost. Thanks


... Kenmore Vacuums

Hi, I have a Kenmore Whispertone canister vacuum that I purchased in 2007. The model # is 116.22271503C, which seems to confuse the parts people. I need to buy a new powerhead & a few months ago was given a price of $75, but now Sears Canada tells me the part # is 20 116KC5OXBZRZUO1 described as Power Mate Assembly for $192.99. I thought the Power Mate was the small powerhead for stairs, upholstery, etc. Have they located the wrong part for me, or is this really what it costs?? Thanks in advance


Yes, powerheads are quite expensive. That sounds about right.\015\012You can check Ebay for better prices, but check the shipping rates before ordering. ... Kenmore Whispertone 23312 Bagged Canister Vacuum

SEARS KENMORE CANISTER VACCUM, Model No. 107-23050, Volts 120AC, Type AV, Hertz 60, Amps 11: This is a small model vaccum with an on/off switch on the canister. The on/off switch has gone and the vaccum can only be used by plugging and unplugging it. I am looking for the replacement on/off switch part but Sears Kenmore has no listing for this vaccum or parts. I can't recall just how long ago it was purchased but could be 10 years (or more). As this model is perfect for the application neede


... Vacuums

Belt for kenmore whispertone 116.26512690 - Kenmore 23313 Whispertone Bagged Canister Vacuum


... Kenmore 23313 Whispertone Bagged Canister Vacuum

What is the bag for Kenmore whispertone 300 - Kenmore 23313 Whispertone Bagged Canister Vacuum


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Manual for Whispertone 300 Model 116.28612790


... Kenmore Vacuums

Kenmore whispertone 8900 won t turn on


... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

Power cord can not find replacement power cord for power brush attachment on kenmore canister vacuum, model #2491290 power brush attachment model # 5491290. i can not even find those model #'s anywhere online, not even partsdirect.com. any help would be great. thanks, david


Call 1-800-948-1358 ask for Buck mon.-fri. 9am-5pm est sat.9am-1pm est ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0553 seconds