Having problems with your Panasonic MC-UG471 Bagged Upright Vacuum ?

No power - Panasonic MC-UG471 Bagged Upright Vacuum


Answers :

On/off switch went bad on the unit
Repair Help & Product Troubleshooting for Panasonic MC-UG471 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No power - Panasonic MC-UG471 Bagged Upright Vacuum


On/off switch went bad on the unit ... Panasonic MC-UG471 Bagged Upright Vacuum

Bissell Powerf DJ68-00161C Upright Bag Vacuum will not power on. I did rinse out the bag compartment but it should be dry now. I use the Style 7 bag & belt. This is the first time it will not power on.


Hmm, you really should not ever rinse out your vacuum unless you have a model that specifically states it is called for. If you must, then use only a slightly damp sponge or cloth. There are so many ways water can have ruined your motor. Let the whol ... Bissell 3522 PowerForce Bagged Upright Vacuum

No Power HOOVER U5018-900 bagged upright Vacuum


... Hoover U5018-900 Bagged Upright Vacuum

How do I make my vacuum get unclogged - Hoover U6311-930 Power Drive Bagged Upright Vacuum


Hi,Here is a tip that I wrote about my Bissel but I bet you have the same problem and the hose is clogged...Bissell Bagless Upright Vacuum not work ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

Vacuum has no power - Kirby Ultimate G Bagged Upright Vacuum


... Kirby Ultimate G Bagged Upright Vacuum

We understand that your problem is: I currently own and use on a regular basis the Kenmore Progressive upright bagged vacuum. Model number 116.35923500. The headlight flickers and the intelliclean light stays red. Ive tried cleaning the intelliclean sensors, changed the bag, and cleaned off the agitator. Is this a power issue? Should I take it to the store? Any suggestions would be greatly appreciated


Welcome to fixya\012\012Hello\012\012 \012\012I have a solution for this ... Kenmore Progressive 35922 Bagged Upright Vacuum

Vacuum dead I have oreck XLx2 bagged upright - the belt ,plug and cord have been replaced - has been working great - now went to plug it in and it does not work - the light goes on in the on/off switch so power is working but vacuum is dead - any suggestions


If the cord coming from the bottom up to the handle is loose, and is a plug, push it in. If that doesn't help. then could be a problem with the motor. One other thing to check is inside the handle, maybe a wire came loose. ... Oreck XL2200 Bagged Upright Vacuum

Power keeps going on and off all the time - Sebo X4 Bagged Upright Vacuum


A common thing that happens on this model is that the power cord where it goes into the handle will become broken. Not visually at first, but will give enough of a headache to frustrate you when your vacuuming. \012\012you can check this ... Sebo X4 Bagged Upright Vacuum

Has power but won't turn on - Oreck XL21 Bagged Upright Vacuum


Sounds like either a bad switch,bad wire or a bad motor -- use a volt meter to trace power out to find what is at fault.\015\012if it turns out to be a bad motor or switch -- you can get the replacement parts at your local vacuum repair shop. ... Oreck XL21 Bagged Upright Vacuum

Motor shut off - Panasonic 471 Bagged Upright Vacuum


... Panasonic 471 Bagged Upright Vacuum

Motor whined loudly. Vacuum failure. Suspect motor failure. Hoover.com doesn't list a replacement motor. Drive also failed - could be secondary belt HOOVER U6323- Power Drive Bagged Upright Regards, Jeffrey


Hello, funI was trying to help you out here. Maybe this will help some? I was going back to some customers that asked questions in the recent past and even farther back. It appeared that no one answered some of them, So, I thought I ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

My orek has no power it won't turn on - Oreck XL Ultra Bagged Upright Vacuum


The spade connections are loose, take the handle apart and check them ... Oreck XL Ultra Bagged Upright Vacuum

Eureka 4870 will not power on - Eureka Smartvac 4870 Bagged Upright Vacuum


It is probably a thermal issue ... Eureka Smartvac 4870 Bagged Upright Vacuum

Oreck XL suddenly lost power - Oreck XL Ultra Bagged Upright Vacuum


Wiring in handle has loose connection or the brushes in the motor needs replacing. cost $18 for new ones. ... Oreck XL Ultra Bagged Upright Vacuum

Wont shut off when I press the power button - Dirt Devil Featherlite Deluxe Bagged Upright Vacuum


I need to know how to change the belt on a Dirt Devil Upright Feather Lite Deluxe Vaccum cleaner; unable to find the manual. ... Dirt Devil Featherlite Deluxe Bagged Upright Vacuum

Doesnt **** - Hoover U6311-930 Power Drive Bagged Upright Vacuum


Hello,If the vacuum sounds like it usually does and still doesn’t pick up, you probably need to replace the belt. To check this, turn the vacuum on and lay it down sideways. Check to see if the roller is spinning. If it's spinning, ... Hoover U6311-930 Power Drive Bagged Upright Vacuum

The suction isnt working - Panasonic MC-V5005 Bagged Upright Vacuum


Disconnect the hose where it goes into the base and see if you have suction there.if you don't then your intake hose is clogged.thats the hose that your long stretch hose connects to.take a coat hanger and bend the tip so the end is rounded.work it d ... Panasonic MC-V5005 Bagged Upright Vacuum

No power - Kirby Ultimate G Bagged Upright Vacuum


This COULD be the cord. I had a cat chew my cord and so I had to take it in to a Kirby dealer and have it replaced and it worked fine after that. Another reason could be that the motor needs rehauling. I also had to have this done once and it cost me ... Kirby Ultimate G Bagged Upright Vacuum

How to take apart to replace power cord - Miele S183 Powerhouse Bagged Upright Vacuum


Hello,In order to access the cord on the Miele S183 upright, you'll need to first remove the handle from the vacuum cleaner. There is a large screw that holds the handle in place that is located under neath of the lower cord wrap hook. ... Miele S183 Powerhouse Bagged Upright Vacuum

I have the bissell power force bagged upright vacuum and the brush is not turning, I have replaced the belt but the brush will not move but the metal piece that is hooked to the motor that spins the belt and brush is turning but the brush won't, and the belt starts to burn


Sounds like your brush roll is seized. Remove the brush roll (see picture) and make both of the end caps spin freely. If not, replace it and you should be set. *An example of a brush roll* ... Bissell 3522 PowerForce Bagged Upright Vacuum

I don't get not power after attach the hose? - Kirby Generation 3 Bagged Upright Vacuum


Bad power switchSwitch is designed to run motor on higher RPM when hose is connected. The high speed lever mechanism failed and you need the new switch. You can find it ... Kirby Generation 3 Bagged Upright Vacuum

The power button quit working - Hoover U6446-900 WindTunnel Bagged Upright Vacuum


Please click here to see the part diagram for the Hoover Windtunnel Self Propelled model U6446-900\01 ... Hoover U6446-900 WindTunnel Bagged Upright Vacuum

Power but not sucking up.. - Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum


You have to check two thins\0121 that none of the hoses or filters are clogged on the unit. This is not always so easy but the entire run of the hose till the bottom must be clear.\0122 You have to have the door th the bag closed properly. If there a ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

No power on a bissell 71y7 when turned on - Bissell 3522 PowerForce Bagged Upright Vacuum


Hey, having no power when you want to vacuum is inconvenient.You may want to try another outlet and look for damage on the power cord. If you are still having problems, you may want a Qualified Technician at one of our Authorized Service Centers ... Bissell 3522 PowerForce Bagged Upright Vacuum

NO POWER TO UNIT.HOW DO I TAKE IT APART? - Kirby G4 Bagged Upright Vacuum


Remove the screw attaching the cord cover to the side of the machine and remove the cover by carefully prying from the rear with a flat screwdriver. Check the cord with a voltmeter. This machine will also not run unless the rug head (or hose), and ba ... Kirby G4 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1231 seconds