Having problems with your Panasonic MC-V7355 Upright Vacuum ?

My Kirby Generation 3 has no suction at all

\015 The machine starts and the transmission is working but it has no suction,\015

Answers :

Check for a clog by removing the bag mini emptor (plastic bottom of the bag) twist it off by rotating it away from the vacuum
Repair Help & Product Troubleshooting for Panasonic MC-V7355 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need Kirby Generation 3 Vacuum cleaner manual. Vacuum is not picking up dirt from floor. Seems to have enough suction to inflate the bag, but when you check the suction under the vacuum, there seems to be extremely litle suction.


If your brush roll is turning and your bag is not overly full, then the only other thing it can be is a clog where the bag connects to the vacuum. Turn the plastic part out away from vacuum and lift off to see if you have something clogging it. It ... Kirby Generation 3 Bagged Upright Vacuum

My Kirby Generation 3 has no suction at all


Check for a clog by removing the bag mini emptor (plastic bottom of the bag) twist it off by rotating it away from the vacuum ... Panasonic MC-V7355 Upright Vacuum

Cant get the suction impellar off to replace - Kirby Generation 3 Bagged Upright Vacuum


Shaft has to be spun clockwise. It has reversed thread. If this is not the problem but you just need to somehow hold the field - see instructions HERE. You may ... Kirby Generation 3 Bagged Upright Vacuum

Kirby generation 3 won't vacuum. It runs and


You may have suction but if the belt is worn the roller brush won't spin and therefore won't pick up anything. You can get a replacement belt here: ... Kirby Generation 3 Bagged Upright Vacuum

Kirby Suction and Blower Connector


Yes you can. The end of the hose that mates with the suction/blower is flexible. You can use a pair of needle nose pliers to compress the hose end and force it out of the suction/blower connector. ... Kirby G4 Bagged Upright Vacuum

I have a Dyson DC24/ all floors, serial number 530-US-D78353 that I have registered already w/ your company. The vacuum is generating suction from the main outlet (that goes to the canister)///but once I place the canister into position..there is no suction from the floor foot. The roller is working/spinning, but no suction..picks up nothing, I have cleaned and rechecked all filters and can not figure out why I suddenly have no suction. Appreciate your input and/or advise where there is a local


... Dyson Ball DC24 Bagless Upright Vacuum

I have a Kirby G series diamond edition. There seems to be no suction when I turn on the vaccum. The bag inflates, but the roller does not turn. It has a new belt and the roller brush is clean. Any suggestion on what I might do to increase the suction and get the roller bar moving?


THE IMPELLER LOOKS SHOT.. 25 QUID FOR NEW ONE,,LIFT THE LID AND TURN THE ROUND PIN AND CHECK FOR RIDGES ROUND THE WHITE IMPELLER,,IF NONE THERE THATS IT,, HAPPEND TO ME TEN MINS TO FIX GEORGE ... Kirby Ultimate G Bagged Upright Vacuum

How to set up kirby to vacuum mattress - Kirby Generation 3 Bagged Upright Vacuum


Detach lower end of bag from body of vacuum.\015\012Attach hose to the opening.\015\012Attach above floor tool for vacuuming.\015\012\015\012See video instructions on below site.\015\012\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

Kirby sentria does not have suction - Kirby Sentria 192006 Power Cord


... Kirby Sentria 192006 Power Cord

Kirby g6- How do you replace the cord? - Kirby Generation 3 Bagged Upright Vacuum


I do believe o6 the cord goes in to the metal housing of the motor .They are usually held in by a rubber grommet and they can with some patience and force be pulled out slowly does it as you don't want the wires ... Kirby Generation 3 Bagged Upright Vacuum

Hi -- I have a Kirby Sentria and it is great except that I am getting no suction at all through the big silver power head. Suction through all the other attachments works well. I haev tried it with the roller belt on and off, and that doesn't seem to make a difference. Am I missing something?? Thanks!


You can take off the power head and look in that whole where the belt is and see if there is a paper towel or something in there clogging it up. Also tug on the belt and make sure it is tight - because if it is loose it is broken and you ... Kirby Vacuums

We bought our Kirby less than 5 years ago and lately are not happy with it....it keeps breaking. The warranty has expired and our biggest complaint is that it has lost it's suction power. All the contents stay in the hose when I vacuum out the car or upholstery and it does vacuum well at all. The Kirby store quoted us over $200 to fix/ service it. Apparently this is not covered in the free yearly maintenance which we just had done. Any suggestions?


\012 Hi there,\012Well I do have a suggestion though you may not like it use it as a boat anchor.....no no I am just kidding. I have sold vacuums for 20 years and Kirby has b ... Kirby Ultimate G Bagged Upright Vacuum

Kirby sentria I have a kirby and the belt is on, however it has very little suction. I am unsure what to do.


You have to make sure the green light is on.. in the corner .. and if it is that means its working properly. If you have no suction then it is usually the belt and or the bag. so make sure your bag is not full , make sure everything is attatched pro ... Kirby Ultimate G Bagged Upright Vacuum

How to install Kirby g4 fan - Kirby Generation 3 Bagged Upright Vacuum


It needs to be stripped completly down, if you are confident at doing this then here goes.\015\012It has been a while for me so take your time and some of the steps may have to be completed slightly differently.\015\012Isolate / unplug t ... Kirby Generation 3 Bagged Upright Vacuum

Kirby Hello, I have a generation 3 kirby- it was working - I turned it off & it will not turn on again - is there a safety switch /reset button or did the on/off switch go out - I have had it 15 years & replaced the switch 1 time - Thanks


You either need a switch or a cord. Check out my troubleshooting link which includes links to do-it-yourself guides and parts.\015\012\015\012 ... Kirby Generation 3 Bagged Upright Vacuum

How do I assemble kirby g3 carpet cleaner? - Kirby Generation 3 Bagged Upright Vacuum


Greetings,If you click the link below it will take you to a video demonstration that explains step by step what you need to do to convert your Kirby into a carpet shampooer. The vacuum in the video is the Kirby Sentria, but the procedure ... Kirby Generation 3 Bagged Upright Vacuum

Kirby My Kirby is less than a year old.  It's suction is no longer strong. I tried cleaning the hose and even replacing the bag.  Do you have any other suggestions.  By the way, I have the Sentera model.  Thank You


Here is a link to my online troubleshooting guide. Hope it helps...\015\012\015\012http://r ... Kirby Generation 3 Bagged Upright Vacuum

My vacuum kirby turned by itself - Kirby Generation 3 Bagged Upright Vacuum


The problem was that the piece that you connect to the wall outlet was broken. I purchased a new cord and it is working fine now. Thank you! ... Kirby Generation 3 Bagged Upright Vacuum

How to replace kirby generation 3 switch? - Kirby Vacuums


I am a trained professional with all the tools & experience and this is a job that would take me 2 hrs. Do your self a favor and take it to your local vacuum shop.It'll probably run you around 200 dollars , half parts and half labor. You pr ... Kirby Vacuums

My Kirby Ultimate G does not have enough suction to pick up pet hair. Is there anyway this can be corrected? I felt under the vacuum when it was running, the roller is running, but I felt very little suction.


An Ultimate G has lots of suction. If you turn on your vacuum and the bag immediately inflates - that is how you can tell if your Kirby is moving air (suction). There is a more modern brush that came out with the Ultimate G Diamond and the Sentria ... Kirby Ultimate G Bagged Upright Vacuum

My Kirby vacuum is a G100 upright. It has no suction. It has been cleaned and the bag is empty (new bag). My mother-in-law bought the same kind and hers is doing the same thing. It has no suction and won't pick up anything. Thank you, Rachel Souza - [email protected]


... Kirby Vacuums

I have a Kirby Generation 3. The handle spring assembly is broke, so I took it apart to get a part number. Can you tell me if there is a cross reference or something on these parts. I am unable to find a part with the same number that is located on the part I took off. The number on this spring assembly shows Kirby HA-670289B K-1. Any help finding this part is appreciated.


... Kirby Vacuums

How much horsepower for a Kirby G3 - Kirby Generation 3 Bagged Upright Vacuum


All kirbys are good, i reccomend getting a G6 ... Kirby Generation 3 Bagged Upright Vacuum

My kirby will not turn on - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum

Kirby g3 upright will not pick up trash - Kirby Generation 3 Bagged Upright Vacuum


... Kirby Generation 3 Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0355 seconds