Having problems with your Panasonic MC-V9620 Canister Vacuum ?

How do I change the belt in my Panasonic vac? MCV 9620


Answers :

Hello,

Actually I just answered a similar question on how to open the power nozzle on a Sears Kenmore. The Sears Kenmore is actually made by Panasonic, and the repair is identical to replace the belt. Here's my other repair solution that includes a link to the Panasonic instruction manual that will walk you right through this repair;

I will also explain how to access the roller \015\012brush below, and if you'd like to see diagrams of how to do it, you may \015\012visit the link below to the Panasonic owners manual. Start at page 46,\015\012 then go back to page 40.
http://service.us.panasonic.com/OPERMANPDF/MCCG973-MUL.pdf

In\015\012 order to access the roller brush on this model, here's what you need to\015\012 do. Underneath of the headlight cover, there are two screws that need\015\012 to removed first. In order to get to these screws, simply push on \015\012both sides of the headlight cover, and lift it straight up while pushing\015\012 both sides. After the headlight cover has been removed, you'll be \015\012able to visibly see the two screws that need to be unscrewed (phillips \015\012head screw driver). Remove these two screws next.

After the \015\012screws have been removed, turn the power head upside. If you look at \015\012both the left and the right sides, you'll see a little indentation on \015\012each side. All you need to do is put a flat head screwdriver in these \015\012indentations, and pry up on both sides. This will remove the top \015\012housing. Once you have top housing removed, you'll see there's one \015\012more cover that goes over the roller brush. There are two tabs on both \015\012sides behind the roller brush. If you squeeze these two tabs, you can \015\012now remove the white colored housing that covers the brush, and have \015\012full access to the brush.

I hope that this helps you repair your belt. If you found this repair helpful, please be\015\012 sure to rate it by clicking the thumbs \015\012up icons in the top right hand corner. If you have any other questions \015\012about how to repair this, please feel free to request a clarification, \015\012or add a comment to the repair, and I'll be more then happy to help you.

Thanks\015\012 very much,

Chris Jones
GoVacuum
Repair Help & Product Troubleshooting for Panasonic MC-V9620 Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the belt in my Panasonic vac? MCV 9620


Hello,Actually I just answered a similar question on how to open the power nozzle on a Sears Kenmore. The Sears Kenmore is actually made by Panasonic, and the repair is identical to replace the belt. Here's my other repair solution that ... Panasonic MC-V9620 Canister Vacuum

MY VACUUM ISN'T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN'T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON'T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.


You can get Eureka replacement belts here:Eureka Vacuum Betls ... Vacuums

I replaced the belt in our Eureka Boss Smart Vac, it still seems loose, it uses a type R belt. The beater belt still doesn't seem to turn properly and seems that it doesn't pick up very well when I use it on my berber carpet. We have 2 dogs and I like to use it frequently. I have changed the bags and belt......


Check to see that the beater brush is not frozen up. Pull the brush and clean it, spraying some WD40 on each end piece that holds the brush in place.\015\012Also be sure the belt is properly installed so that the brush turns in the correct direction ... Eureka Vacuums

Solution for "the unit is making smoke rubber belt smell how do i change the belt...hoover steam vac f7225-900


There is no belt on this model. From your description, it is definitely electrical, possibly the motor. I would have it looked at a repair shop. ... Hoover F7225-900 SteamVac V2 Upright Vacuum

Vacuum belt keeps coming off. Need instructions on how to change belt on Panasonic mc-6955 upright vacuum cleaner.


... Vacuums

Need to replace belt on Eureka Powerline 12.0 vac. Screws look like Torx head or something on bottom of vac. Are those the screws that need to come out for changing? If so, what size do I need?


No, do not remove the torx head screws for a belt change. If there are any screws that need to be removed for the belt change, they will be phillips head. What is model # of vac?? ... Eureka Vacuums

How to change belt on Panasonic MC-E464 vacuum cleaner


Remove the bottom plate, the belt goes fron the brush rol to the motor shaft or pulley. ... Vacuums

How to change belt on vac u90-p4-b


... Vacuums

I can't seem to get the bottom off of my progressive vac to change a belt help?


There is screws and little lock grooves ... Vacuums

How does the bottom open on a Hoover Vac ModleU5064-930 to change the belt ?


If you flip the vacuum over there should be (4) access screws on the base plate that covers the roller brush. Remove those and you will be able to access the belt. The belt you need you can get here: ... Vacuums

Trying to change belt in kenmore 3116890 upright vacuum cleaner model116. Can't open vac


... Kenmore Vacuums

How do you change the belt on a hoover steam vac spin and scrub


You have to turn it over and unscrew some screws you'll see it. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How do I change the vacuum belt on my eureka vacuum,(world vac, mega boss)


... Eureka Mega Boss 4460DT Vacuum

How to change a belt on a shark v15z vac. tks john t


John -\015\012\015\012Your vacuum doesn't have a belt - only vacuums with rotating brushes use drive belts.\015\012\015\012What problem are you having - why do you think you need to change the belt?\015\012\015\012 ... Euro-Pro HEPA Shark EP035 Bagless Handheld Vacuum

How to change a belt on Panasonic MC-V5217 vacum cleaner. Is there a diagram?


... Panasonic MC-V5217 Vacuum

How do i change the belt on a hoover steam vac ultra


Are you sure there is a belt in there? Here is a schematic.http://www.vacshopusa.com/pdf/hf5837900.pdfAny good vacuum repair or sales shop that does Hoover should be able to order you any part ... Hoover F5872-900 SteamVac Wet/Dry Vacuum

How do i change the belt on my eureka enviro vac model number 3041 BZ


... Eureka 3041BZ Upright Vacuum

How do you change a upright panasonic vacuum belt?


... Panasonic MC-V5454 Upright Vacuum

How to change a belt on a bissell revolution vac 37604


Follow the link below to www.bissell.com for belt change video.\012http://www.bissell ... Bissell Lift-Off(R) Revolution(R) Turbo Upright Vacuum

Where is the belt on the hoover steam vac, how do you change it


There is no belt. The brushes are ran by an air driven turbine. Make sure the top recovery lid is on correctly and sealed. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

How to change belt on Dirt Devil Model 2003 can vac sweeper


I found out that the Royal Mfg. Co. used the same schematic from this model to make newer models which had a belt, however, this older model that I have does not have a belt drive. ... Vacuums

No suction on my eureka boss smart vac. The belt is fine and the roller moves. I just changed the bag but no dice. any insight?


I know this is an old question but this is a good vac and maybe I can\012 help somebody else some day, wish I'd figured this out a couple months \012ago when this problem first started. :} Anywho, \012this is another option from an amateur; I don't ... Eureka Smartvac 4870 Bagged Upright Vacuum

How to change vacuum belt on Eureka the boss smart vac


... Eureka Vacuums

What makes a bissell vac 3130 throw out dirt instead of sucking it up? i just changed the belt that was broken.


Does your vac require you to twist the belt and fit it onto a shank on the impeller? If so twisting the wrong way will make your beater bar roll the wrong way and that will make it throw dirt out the front. ... Bissell Vacuum - Momentum Cyclonic 1 ea Bagless Upright Vacuum

Where is the belt and how do you change it? on my euerka pet expert vac model 3276 type BVZ


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0877 seconds