Having problems with your Panasonic MC-V9644 Bagged Canister Vacuum ?
Automatic cord return
\015 The cord doesn't retract all the way. It stops with about 3ft. remaining out. Can this be repaired or replaced?\015
If it is anything like an electrolux there is a coiled spring inside that free wheels around a hub. pulling the cord too far out makes the spring slip on the free spinning hub. you may need to take apart the vac and rewind the spring.
Repair Help & Product Troubleshooting for Panasonic MC-V9644 Bagged Canister Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Automatic cord return
If it is anything like an electrolux there is a coiled spring inside that free wheels around a hub. pulling the cord too far out makes the spring slip on the free spinning hub. you may need to take apart the vac and rewind the spring. ... Panasonic MC-V9644 Bagged Canister Vacuum
Simplicity S20 canister vac - power cord catch slipping, cord returns, does not stay extended
... Simplicity 7250 Deluxe Vacuum
Automatic power cord rewind on Hoover S3630 vacuum is veru weak
... Hoover S3630 WindTunnel Bagged Canister Vacuum
Return cord on electrolux canister vacuum with bag purchased in 1969
Your machine should still be under warranty which is voided if you do the work yourself or have another vacuum shop do it for u. ... Electrolux Lux 7000 Bagged Canister Vacuum
The automatic winder for the power cord doesn't rewind
Http://www.sannerud.com/house/miele.html\015\012\015\012Found this when i was looking to fix my own vacuum cleaner problem ... Miele Cat & Dog 326i Bagged Canister Vacuum
I have a Hoover Deluxe Elite Rewind w lifetime Hepa filter and automatic rewind cord 24ft. but recently it is not vaccuming as sufficent as it did last time used, which is once per week. I do not see where anything is clogged, please advise..
Make sure the hose is installed in the foot when using for the floor. check the belt. when working properly, you should see dirt spin in the dirt cup. ... Hoover U6630-900 WindTunnel Bagless Upright Vacuum
The electrical cord will no longer retract automatically
... Morphy Richards Vorticity 71082 Bagless Cylinder Vacuum Cleaner, White
The automatic cable rewind on my Morphy Richards pod vacuum cleaner keeps retracting. I'd rather it didn't work at all than be constantly pulling out the cord. Is there any way in to fix it or disable it?
Hi\015\012Not really. It means that the cord has been pulled roughly when its been plugged in and the retracter is getting weaker to hold the cord that has been pulled out. Generally though wipe the entire cord from the end of the machine with a dry ... Miele S251i Plus Bagged Canister Vacuum
Automatic Cord Rewinder is not rewinding anymore
I had the same problem - the power cord for my Hoover Elite Upright (U5507900) was stuck a few inches out and wouldn't go any further. But when I unscrewed the rewinding mechanism, the cord had clearly gotten twisted and partly buried under itself s ... Hoover Elite Rewind Bagless Upright VacuumVacuum
Eureka rally 2 won't turn on - Eureka Rally 2 Canister Vacuum with Automatic Cord Rewind, 980A
... Eureka Rally 2 Canister Vacuum with Automatic Cord Rewind, 980A
Power cord is loose, power cuts off
If its the Auto wind cord then fault could bre internal contacts, not easy to get into suggest best to go to service centre..... ... Miele s558 Silver Moon Vacuum
How do I repair the cord rewinder on an electrolux model #1677?
My vacumn cleaner turns off automatically after about 15 mins
Is the beater bar spinning freely in its bushings/bearings? If not it could be causing excess drag and overheating the motor. Remove this and clean/lubricate.\015\012\015\012I agree with making sure all vents are clear as well. ... Dirt Devil Vision VI Bagless Upright Vacuum
Miele vacuum Sometimes when I hit the auto roll up cord button or even move the cord, the power vacuum goes off. I move the cord again and it comes back on. I took it apart and looked at the connection from the cord to the auto roller. These are the electrical slip on type connections and are still in good shape. There are no bends in the cord. I air dusted everthing inside, put it together (with no extra parts!). Good news..it powered up so I did not break it, but it still has the same problem.
I own an Oreck 2310RS upright vacuum cleaner. The cord is too short for my needs. The cord I need is a two wire 25 to 30 foot cord. Where can I buy this vacuum cord and how do I connect it? Thanks, Don
You can buy one at a oreck store but i would tell you to use an extention cord ... Oreck XL2200 Bagged Upright Vacuum
Have an older model Electrolux canister model. The electric plug is broken so I got a new plug to put on. When I cut the cord to replace the plug, the dang cord retracted into the unit. So how do I get access to the cord area so i can find the end to the cord!
Hi,\012\012You have to open the vacuum cleaner and look for the wire.\012\012It is located inside the circular wheel, where it wind itself up.\012\012Don't be afraid to open it, unless your willing to pay somebody just to install a ... Electrolux Vacuums
Cord rewind The power cord is jammed and won't go in or out. I can't find a way to get the cover off to have a look at it. Any suggestions please? Power cord jammed won't go in or out. Can comeone tell me how to undo the casing to get to the power cord?
Which model do you have.. ... Vacuums
I need to replace electrical cord on hoover windtunnel UH70120. How do i get the cord reel off? Can i open the cord reel to replace the cord?
... Hoover Company Wind Tunnel U53019 Upright Vacuum
Bosch canister vac BSG81313. Took cover off to remove lots of hair, dirt etc from running without bag in place. Everything went back together OK, but cord reel spring went zip when cover was removed. How do I rewind the spring so there is tension when the cord is pulled out ? Wound cord back onto reel, but reel just clicks ever revolution etc...no tension when cord is pulled out of vac. Bob
The spring inside the hub of the cord wheel has escaped from the locking tab. You must completely dismantle the vacuum to access the cord wheel - take it out, reattach the spring and reassemble the unit. All you need is a phillips screwdriver, a pai ... Vacuums
I have a hoover upright bagless - turbo power 6500 The cord has been run over and I just noticed white stuff on the cord where it is tattered. My husband said he saw it 6 months ago and never said anything! Anyway, what is that white stuff in the cord? Is it dangerous in any way? Is it insulation? What is that usually made of? Just concerned since the cord is dragged over the floor and my little boy constantly has his hands and face on the floor. Thanks. Worried mom
It can be potentially dangerous. What you see is the cord insulation, if you move that a little you can see the power wires. They are coated and cannot hurt you if not damaged. If i were you i would wrap it in electrical tape or best thing would to ... Hoover U6616-900 WindTunnel Bagless Upright Vacuum
How to wind cord onto spring loaded retractable cord reel for a Kenmore canister vacuum. There is a metal 'U' shaped, spring loaded, piece that fits over the outer aspect of the wheel. If cord needs to get wound on under this metal band I can't figure it out and the band is like factory sealed onto the wheel. Also. I don't know which direction to feed the cord onto the wheel
What is the exact model # please?Thanks!! ... Kenmore Vacuums
Miele Red Star model S314. Cord reel is stuck. About three feet of cord is out. The rest of cord is jammed inside machine? How do I get to where the cord reel is?
It is actually simple when I tell you, Here we go... \012\012First, open the lid and take the bag, and hepa filter out of the machine. \012\012With a slot screwdriver, pry the hinges of the bag door out a little and take the b ... Miele Red Star Bagged Canister Vacuum
Hi , I have replaced the electric cord on Electrolux Lux Royal vacuum , but the rewind that retracts the cord does not pull it in . The coil spring looks ok but it will not pull the cord back in , any suggestions please . Thanks Dave Ryder
Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=564353\015\012Generic problem for all Vacuums\015\012Hi, I have replaced\015\012Posted by dryder on May 02, 2008 ... Vacuums
I need to replace the cord wrap part that flips up to retain the cord and down to release the cord and can find the part to order one.
You can locate your nearest dealer through the Hoover web site and then call them to order you one. once they have it in you could take the vac to them for the cord hook to install for you. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
Power cord worn out where it enters motor, have to move cord certain direction and will turn on. Cord finally gave out one day and almost shocked me when it literally blew out. wont turn back on
You have popped the fuse in the plug top or have burnt out the wires in the cable \015\012\015\012No matter you have got to shorten and re-wire the cable into the cleaner or get a new lenght of flex and do the same thing.\015\012 ... Filter Queen Majestic Canister Vacuum