Having problems with your Polti Vacuums ?

The yellow button on my Polti Vaporetto VT leader will not come on.


Answers :

This problem needs some prat replacement so I suggest you to take it to a repair center near you and let them diagnose and repalce the parts that should be change..
\015\012
\015\012Good luck.......
If that's the case then you should replace your heater...
Repair Help & Product Troubleshooting for Polti Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The yellow button on my Polti Vaporetto VT leader will not come on.


This problem needs some prat replacement so I suggest you to take it to a repair center near you and let them diagnose and repalce the parts that should be change..\015\012\015\012Good luck....... ... Polti Vacuums

Just got a Polti Vaporetto 1020 from someone and cannot get it to work. One yellow light lit up and was on for a few minutes then turned off...and there is nothing...flip the switch on the handle, nothing...flipped other yellow button, nothing...any suggestions? or where I might get directions on how to use it? didn't come with manual. Many thanks. best, pat


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Vaporetto 2400: Water out light comes on when tank is full


Hi you need to put 5ml of Kal Stop fo Polti machines into 1000/1500ml of water into the tank, The stronger solution is better (1000ml) Let it heat up and this should break down the limescale on the solenoid. I tried this today and it has worked sav ... Polti Vaporetto 2400 Canister Steam Vacuum

My polti vaporetto 2400, heats the water up, but the steam wont come out - help


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti vaporetto comfort - steam not coming out


... Polti Vacuums

Heating up but no steam coming out - Polti Vaporetto 2400 Canister Steam Vacuum


Will be clogged up with limescale, you should use Kalstop to prevent this, it is a bio-degradable, non-toxic limescale remover-preventitive. ... Polti Vaporetto 2400 Canister Steam Vacuum

Water isn't heating up in my Polti Vaporetto steam cleaner, although the lights come on on the switches ok. I live in Belfast, can u advise where I can go for repair please. Thanks Philip.


... Polti Vacuums

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena


Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

My polti vaporetto leader won't heat up . power lights are on .


... Polti Vaporetto 2400 Canister Steam Vacuum

I have a Polti Vaporetto 910 steam cleaner with a iron attachment. Now the problem is the iron gets hot but no steam comes out. Please help


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti forever 600 when I push button for steam water comes out from underneath container


... Vacuums

Polti Vaporetto 2400


The first problem you'll have is to unscrew the case. You will need a Torx security key -I bought a set from toolspot.co.uk Code PR7424 Toolzone 9pc Security Torx Keys. This unscrews the case. (I think I paid around £7 incl delivery) The probl ... Vacuums

Vaporetto lecoaspira Red warning light and audible beep come on.


... Polti Eco Pro 3000 Canister Steam Vacuum

Electrical problem The light comes on but the motor will not come on when the on button is pressed. Is there a reset button? I thought it was because the bag was full but I just changed the bag and the motor still will not come on.


The light is separate from motor. No reset switch. Check for a fuse but i suspect it may be brushes are worn out and not making contact.Sometimes that starts as an intermittent.Hopefully one of the coils isn't open circuited. ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

POLTI VAPORETTO PROBLEMS


Hi, It is the solenoid that is sticking, It there fore needs opening up, the solenoid valve stripping and cleaning, or replace at a cost of about £12 then putting back together. they don,t like being left and not used. It is possable if you kee ... Polti Vaporetto 2400 Canister Steam Vacuum

My hamilton beach convection / rotissier over model 31197 oven button has a shortage in it, how can i fix it the button that turns the oven off and on, if you turn it on the oven doesn't come on but if you turn it counterclockwise all the way and hold it the light and the oven comes on. it was working this morning until i put a pan of biscuits in.


Sounds like a contact problem in the switch-Question: How old is the oven? Is it possible that the switch is worn out? If so-- and lets just say the switch cost $25, plus postage, would you want to invest that mo ... Vacuums

Polti Vaporetto Steam - need to open case


Hi, they are not special polti tools. You need a set torx keys like allen keys with the hole up the centre from any decent tool shop. thats what I use with no problem ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Vaporetto 1500 Unable to unscrew polti safety cap. ( nothing to do with steam as machine not turned on yet)


... Polti Vaporetto 2400 Canister Steam Vacuum

How can I release the steam request lever on my polti vaporetto eco 3000?


... Polti Eco Pro 3000 Canister Steam Vacuum

Polti Vaporetto 2400 does not heat water


... Polti Vaporetto 2400 Canister Steam Vacuum

I have the Oreck Sanapathic DMS2000 Handheld Steam Vacuum, but no steam comes out when I push the button. I hear the motor, is there any buttons I am missing or any help on how to make it work, been plugged in for 5 min now. Held button down for 2... nothing. Just a drip of water.


ORECK DMS2000 No Steam First, tested tank and filter flow together using suction via plastic tubing. Worked freely Second, removed pump and disconnected hoses and terminals [watch location,three terminals on pump, two plugs] ... Oreck Sanapathic DMS2000 Handheld Steam Vacuum

REMOTE CONTROL IS MALFUNCTIONING & NOT TURNING ON CUSHION - Hello. I bought a used (by near new) Shiatsu+ Massaging Cushion from Ebay. When I installed it today the remote control was faulty. When you push the Power button, the blue light comes on, but none of the other buttons work. When you push the Power button again to turn it off, it clicks & turns itself back on again. So it's running but nothing is happening in the massage cushion. I did see a card in the box saying "For the Shiatsu


Before you use this cushion you MUST first 'unlock' the rollers which are held in place by a screw which MUST be removed or the unit will self destruct. The manufacturer provides a hex wrench to remove the shipping screw and a large label on th ... Vacuums

Polti steam cleaner problem


Here is a site where you can obtain information or service for your equipment. There is no online support that I can find.\015\012http://www.polti.it/eng/index.htm ... Vacuums

I shut my vacume off to change its bag out. Now it won't come on. Oreck xl2. There were no noises before turning it off or any smells of rubber burning. Just won't come back on. Is there a reset button. What can I do?


An access panel mounted atop a vacuum nozzle base via finger operated latches. When the latches are undone the access panel is removed from the top surface of the nozzle base allowing access to the parts of the brush assembly. The panel also has a ... Oreck XL Ultra Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0750 seconds