Having problems with your Polti Vaporetto 2000R Vacuum ?

No steam from my almost new Polti 2600

\015 My 2 month old Polti vaporetto 2600 comes up to correct pressure, but refuses to give me any steam. It worked fine in the morning, but in the afternoon, nothing. It is full of water & the trigger on the handle isn't locked. I'm so cross, because I bought this on the internet & its going to be a big performance to send it back. Any ideas, please?\015

Answers :

It sounds like the solenoid isn,t activating when you pull the trigger which then lets the steam out. It either wants stipping and checking or returning to where it came.
Repair Help & Product Troubleshooting for Polti Vaporetto 2000R Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No steam from my almost new Polti 2600


It sounds like the solenoid isn,t activating when you pull the trigger which then lets the steam out. It either wants stipping and checking or returning to where it came. ... Polti Vaporetto 2000R Vacuum

Steam escaping from around cap (or thereabouts) on polti vaporella iron. what is the problem please? new cap needed? something else? anticipated thanks


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti vaporetta comfort steam cleaner...no steam


If you put two much water in it it wont steam ... Vacuums

The steam polti 900 hand gets very hot and steams water out


... Polti AS800 Canister Vacuum

No suction in new Hoover Steam Vacs


Http://www.hoover.com/pdfs/manuals/F5914900.pdf hopefully this helps ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

New Hoover Steam Vac's brushes do not spin


The brushes are turning by an air driven turbine. The turbine has a \015\012pivot bushing made of steel inside of it that gets rusty because of the \015\012water that is running through it. The turbine will have to be replaced.\015\012 You can fin ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

I have a Euro -Pro select steam cleaner with soap dispenser and the off /on switch is not working properly. It doen't shut off once the steam is built up. Can I order a new hose so I can get a new switch? Thank you, Diane Prey


... Euro-Pro Vacuums

My almost new miele Dog and Cat vac keeps telling me the bag is full when it's not (new bag, no clogs)and I have almost no suction. Any ideas?


Remove the hose and check the suction. It it is still bad check to see if the canister is closing on the bag. Most likely the hepa filter needs replaced. Here ... Miele S514 Solaris Bagged Canister Vacuum

I have an IS222 Bernina Steam Iron that quit steaming today---the iron heats up but the steam switch doesn't light or heat. It appears that we needs a new steam switch. Can you furnish this?


... Vacuums

Mu Shark Electonic Steam Mop, Model SE200 is new, straight out of the box. I have followed all directions, plugged in, blue light flashing, pressed button for steam, and no steam. I have done all of the trouble shooting and still no steam. What is the problem?


... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Polti Vaporetto 1500 Unable to unscrew polti safety cap. ( nothing to do with steam as machine not turned on yet)


... Polti Vaporetto 2400 Canister Steam Vacuum

No steam polti 2001r, heats up clicks, but no steam!!!!!!


The solenoid valve isn,t operating when you pull the trigger. It is caused by either the coil has burnt out on the solenoid or the valve itself is stuck ... Polti Vaporetto 2400 Canister Steam Vacuum

Brand new Shark steam mop out of box - plug in, gets hot but steam won't come out. No steam, just hot mop - should we just give up and send it back?/


Hi,Some types of water will not work, try bottled spring water...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head... ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I have the purple Pro Shark floor steam cleaner mop, Model #3501. The mop heats up, but the steam does not come out until I remove the mop head, then it blows the mop head off and explodes the steam and water all over. It almost burnt me.


... Vacuums

My Delonghi DSS50 steam floor cleaner water reservoir has a broken valve on the bottom where it fits into the steam unit. It leaks water rather than producing steam. I would like to find the valve and replace it or buy a new water reservoir with the valve in it. I cannot find the part I need. Can you help me?


... DeLonghi DSS50 Scopa Upright Steam Vacuum

Hello i have a new shark steam duck, model ...


... Vacuums

My Polti steam iron is not steaming


... Vacuums

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena


Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

Belts breaking/melting The original belt broke at almost 1 year so I replaced it. I changed the carpet setting to shag even though my carpet is very low pile to make it easier on the vacuum. I didn't get to use it but just a couple minutes and could already start smelling the new belt getting hot. I checked the roller and it is easy to spin. Not clogged with hair or dirt. Now the inside of the new belt has small pieces of rolled rubber instead of being smooth. The metal shaft that goes into the


... Dirt Devil M088905 Vision Bagless Upright Vacuum

WILL NOT STEAM , IT IS PRETTY NEW. - Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum


Hi,Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...Euro-Pro Shark Steam Mop Problem ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

Replacement parts where can i find replacement steam pocket towels online for the shark ultra steam blaster hard surface cleaner? I went online to www.sharkcompany.com & www.sharkvac.com and when I enter my model number S3325 search comes back with 0. Thanks


You can found them on amazon, take a look here: Amazon com Euro Pro S3325. I hope this was helpful. Cheers ... Euro-Pro S3325 Handheld Steam Vacuum

Heating up but no steam coming out - Polti Vaporetto 2400 Canister Steam Vacuum


Will be clogged up with limescale, you should use Kalstop to prevent this, it is a bio-degradable, non-toxic limescale remover-preventitive. ... Polti Vaporetto 2400 Canister Steam Vacuum

How do I undo the torx screws that hold the Polti 2400 Steam Cleaner (Polti Vaporetto 2400) together? There is an electrical fault and I will have to strip it down to investigate.The house RCD trips when the item is plugged in, I suspect over the years the cable has been twisted and is now shorting.


Hi you need the torque driver no 20 the problem I had was the 2 middle screws luckily a friend of mine had a set of torque allen keys they were long enough to remove them hope this helps if you llived in the North East I would have let you borrrow th ... Polti Vaporetto 2400 Canister Steam Vacuum

I have contacted Polti UK twice by phone and left a message and twice by email aover the last 4 or 5 weeks and have received NO RESPONSE> So much for Customer Service...!!! I have been given a Polti Steam Cleaner 2001R and would like some User Instructions. Please can you help? Thanks KK


I got the info I needed from: progressacasa.it website.\015\012\015\012Thanks ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti 2400 water will not heat - Polti Vaporetto 2400 Canister Steam Vacuum


It is more likely that the thermostat is not working than the element to have gone. needs stripping and checking then the faulty part to be replaced ... Polti Vaporetto 2400 Canister Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0596 seconds