Having problems with your Polti Vaporetto 2400 Canister Steam Vacuum ?

Polti Vaporetto Steam - need to open case

\015 My control panel has come loose from the body and has dropped inside!I need to access the inside of the case but the screws - Star T20s - are recessed and access is too narrow for the shaft of my 'tool-driver'.I suspect that this may be deliberate to make access difficult and that a special Polti narrow shafted tool may be required.Does anyone have any ideas how I could get such a tool or any other solution? The claener is otherwise in good order and it would be shame to have to throw it away or have to spend a lot of noney on what should be a simple repair.Thanks in advance, Bob J\015

Answers :

Hi, they are not special polti tools. You need a set torx keys like allen keys with the hole up the centre from any decent tool shop. thats what I use with no problem
Repair Help & Product Troubleshooting for Polti Vaporetto 2400 Canister Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Polti Vaporetto Steam - need to open case


Hi, they are not special polti tools. You need a set torx keys like allen keys with the hole up the centre from any decent tool shop. thats what I use with no problem ... Polti Vaporetto 2400 Canister Steam Vacuum

I have been given a Polti 2400 Vaporetto Steam Cleaner and need advice on whether you have to empty a bag or filter


Click on the link below for the manua..http://www.polti.co.uk/get_pdf/234_VT%202400%20M0S08636%20-%201P03%20-%20UK.pdf ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Vaporetto 1500 Unable to unscrew polti safety cap. ( nothing to do with steam as machine not turned on yet)


... Polti Vaporetto 2400 Canister Steam Vacuum

Can't open the cap on my polti mondial vap 2000 steam cleaner


... Vacuums

How do i get the steam in my unused polti vaporetto 2400. red to move up the flexihose to the head


... Polti Vaporetto 2400 Canister Steam Vacuum

Replacement brushes for a Vaporetto Sprint 1200 Polti Steam Cleaner


... Polti VT1300 Vacuum

My polti vaporetto 2400, heats the water up, but the steam wont come out - help


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti 2400 water will not heat - Polti Vaporetto 2400 Canister Steam Vacuum


It is more likely that the thermostat is not working than the element to have gone. needs stripping and checking then the faulty part to be replaced ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Repairs I have a Polti Vaporetto Eco 3000 steam cleaner, no power to unit. Fuse and power socket all ok. Was going then just stoped.


... Polti Eco Pro 3000 Canister Steam Vacuum

Steam escaping from safety cap - Polti Vaporetto 2400 Canister Steam Vacuum


... Polti Vaporetto 2400 Canister Steam Vacuum

Instruction manual vaporetto - Polti Vaporetto 2400 Canister Steam Vacuum


... Polti Vaporetto 2400 Canister Steam Vacuum

How do I undo the torx screws that hold the Polti 2400 Steam Cleaner (Polti Vaporetto 2400) together? There is an electrical fault and I will have to strip it down to investigate.The house RCD trips when the item is plugged in, I suspect over the years the cable has been twisted and is now shorting.


Hi you need the torque driver no 20 the problem I had was the 2 middle screws luckily a friend of mine had a set of torque allen keys they were long enough to remove them hope this helps if you llived in the North East I would have let you borrrow th ... Polti Vaporetto 2400 Canister Steam Vacuum

I have a Polti Vaporetto household steam cleaner that I bought 16 years ago. I haven't used it for about 10 years because the connection between the steam er and the attachments doesn't work properly and it is difficult to use. The shop where I bought it no longer sells them and can't get them fixed anymore. I'm about to ditch it, but thought I would have another go at using it. (It was very expensive). Now I can't get the safety cap off so I can't fill it or test it. Any ideas on what I can do


... Polti Eco Pro 3000 Canister Steam Vacuum

Heating up but no steam coming out - Polti Vaporetto 2400 Canister Steam Vacuum


Will be clogged up with limescale, you should use Kalstop to prevent this, it is a bio-degradable, non-toxic limescale remover-preventitive. ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena


Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

I have a Polti Vaporetto 910 steam cleaner with a iron attachment. Now the problem is the iron gets hot but no steam comes out. Please help


... Polti Vaporetto 2400 Canister Steam Vacuum

MANUAL FOR VAPORETTO vtt 2085 - Polti Vaporetto 2400 Canister Steam Vacuum


Try this link to download the manual. ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti 2400 I am trying to remove the casing from the steam cleaner to fit a replacement wheel. The screws holding the casing are similar to torx but they have a raised centre which means they can't accommodate a torx screwdriver. I thought this was going to be easy just replacing a snap-in wheel!


You can buy T15 torx driver with hole in them from link below. ... Polti Vacuums

Vaporella 630 will not steam - Polti Vaporetto 2400 Canister Steam Vacuum


... Polti Vaporetto 2400 Canister Steam Vacuum

Can't open plastic case of Shark Professional steam cleaner


Yes these are a pain....but if you use a box cutter (razor knife) you can open it right up. It's a must have around the house! ... Euro-Pro Ultra Steam SharkTM II Hard Surface Steam Cleaner Vacuum

Polti vaporetto 2400. Steam is escaping from the central connector block. Help!


... Polti Vaporetto 2400 Canister Steam Vacuum

Cant open the polti vaporetto 1200 'patented' valve


... Polti Vaporetto 2400 Canister Steam Vacuum

My polti vaporetto 2400, I can't open the lead


You need to remove the top anyway you can and replace with new ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti vaporetto comfort - steam not coming out


... Polti Vacuums

Manual for Polti Vaporetto 2400 Steam Cleaner


... Polti Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0569 seconds