Having problems with your Polti Vaporetto 2400 Canister Steam Vacuum ?

Polti vaporetta - steam escaping from valve

\015 Hi, \015\012\015\012When my steam cleaner starts to heat up, rather than the pressure building up, the steam is escaping around the valve area. Any ideas.\015

Answers :

Are you sure it is not escaping from the top? if so replace top.I have had this myself
Repair Help & Product Troubleshooting for Polti Vaporetto 2400 Canister Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Polti vaporetta - steam escaping from valve


Are you sure it is not escaping from the top? if so replace top.I have had this myself ... Polti Vaporetto 2400 Canister Steam Vacuum

Polti vaporetta comfort steam cleaner...no steam


If you put two much water in it it wont steam ... Vacuums

Polti vaporetto 2400. Steam is escaping from the central connector block. Help!


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti Vaporetto I have a problem with my steam cleaner. Cannot get steam to come out, and the big valve at the top just keeps turning in both directions. So can't empty it. I have'nt got an instruction manual either as it was given to me. Any suggestions!!! Terena


Dear Terena \015\012\015\012Had the same problem with a polti vaporetto 1500 ( vtt 1500 ) after butchering the big valve on the top I realised that the problem was that there was a blockage in the black pipe that comes from the machine to ... Polti Vaporetto 2400 Canister Steam Vacuum

Steam escaping from safety cap - Polti Vaporetto 2400 Canister Steam Vacuum


... Polti Vaporetto 2400 Canister Steam Vacuum

Steam escaping from around cap (or thereabouts) on polti vaporella iron. what is the problem please? new cap needed? something else? anticipated thanks


... Polti Vaporetto 2400 Canister Steam Vacuum

My Delonghi DSS50 steam floor cleaner water reservoir has a broken valve on the bottom where it fits into the steam unit. It leaks water rather than producing steam. I would like to find the valve and replace it or buy a new water reservoir with the valve in it. I cannot find the part I need. Can you help me?


... DeLonghi DSS50 Scopa Upright Steam Vacuum

How do i get the steam in my unused polti vaporetto 2400. red to move up the flexihose to the head


... Polti Vaporetto 2400 Canister Steam Vacuum

I have a EuroPro SC410 steam cleaner. It produces steam, but the steam button does nothing but cause the unit to hum. If there is valve to allow the steam to exit, is not working. I would like to replace it, where can I purchase the parts?


... Euro-Pro S3325 Handheld Steam Vacuum

Polti Vaporetto 1500 Unable to unscrew polti safety cap. ( nothing to do with steam as machine not turned on yet)


... Polti Vaporetto 2400 Canister Steam Vacuum

Vaporetta polti VTT2085 1998


The solenoid isn,t operating. Either the valve is stuck or the coil is burnt out ... Polti Vaporetto 2400 Canister Steam Vacuum

No steam polti 2001r, heats up clicks, but no steam!!!!!!


The solenoid valve isn,t operating when you pull the trigger. It is caused by either the coil has burnt out on the solenoid or the valve itself is stuck ... Polti Vaporetto 2400 Canister Steam Vacuum

Shark steam mop,s3501,small plastic steam valve from the machine to head is broken,


Depend if the parts is plastic or metal. You can use gum for to fix it. If Not possible you must order the new ones. Specially if the parts is working hard. God bless you ... Vacuums

Steam escapes Steam Buggy


I've faithfully used by little yellow Steam Buggy to clean tight corners in my replacement windows and was always to get them looking new again and many other small places that needed blown out with steam when wiping or even scrubbing with a toothbru ... Tristar SB Steam Buggy Vacuum

Hello- My Europro EP965 is not shooting out the steam when I activate the switch on the handle. It does not work with the steam iron as well. The indicator lights work and it creating the steam, it is just not letting it out. I believe it is the valve inside, how do I get to it?


Fixya.com is a worthless website.\015\012Thank you ... Euro-Pro S3325 Handheld Steam Vacuum

Shark steam mop. The steam is escaping from the unit but not going into the mop which is staying or the unit will not steam at all


I had the same issue. It was the water hose that goes out of the top of the heating element to the floor unit. Replace the silicone hose and works great again. No part on Sharks website. ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

The steam polti 900 hand gets very hot and steams water out


... Polti AS800 Canister Vacuum

Euro-pro model EP923H Steam Valve


I suspect you have done something on this by now but . . . You need to pry out a plastic cap/insert in the top of the handle. Beneath it are 1-2 screws to remove. The halves will then come apart. I have mine broken down but have no idea what to do ... Euro-Pro EP923 Canister Steam Vacuum

Hoover Steam Vac clean water tank valve leaks


A) make sure that there is not a place for a stair attachment. If\015\012there is make sure air is not leaking through where the attachment goes\015\012on because of damaged or misplaced fitting.\015\012\015\012b) some steam ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

My Polti steam iron is not steaming


... Vacuums

I have contacted Polti UK twice by phone and left a message and twice by email aover the last 4 or 5 weeks and have received NO RESPONSE> So much for Customer Service...!!! I have been given a Polti Steam Cleaner 2001R and would like some User Instructions. Please can you help? Thanks KK


I got the info I needed from: progressacasa.it website.\015\012\015\012Thanks ... Polti Vaporetto 2400 Canister Steam Vacuum

How do I undo the torx screws that hold the Polti 2400 Steam Cleaner (Polti Vaporetto 2400) together? There is an electrical fault and I will have to strip it down to investigate.The house RCD trips when the item is plugged in, I suspect over the years the cable has been twisted and is now shorting.


Hi you need the torque driver no 20 the problem I had was the 2 middle screws luckily a friend of mine had a set of torque allen keys they were long enough to remove them hope this helps if you llived in the North East I would have let you borrrow th ... Polti Vaporetto 2400 Canister Steam Vacuum

Heating up but no steam coming out - Polti Vaporetto 2400 Canister Steam Vacuum


Will be clogged up with limescale, you should use Kalstop to prevent this, it is a bio-degradable, non-toxic limescale remover-preventitive. ... Polti Vaporetto 2400 Canister Steam Vacuum

The extra large mop head attachment will not release steam. It seems to be clogged, and the steam escapes above the head attachment. How can this be resolved?


Hi,I saw this post, so I had to go and checkout my wife's shark....If you pull the attachment off and look inside you will see that there is a small hole that the steam travels through into the flexible hose with the spring around it and ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My polti steam cleaner is leaking steam when it reaches its ready stage. i believe that the threads on the safety cap may be worn . can i get a replacment part for this problem


... Polti Vaporetto 2400 Canister Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0294 seconds