Having problems with your Polti Vaporetto 2400 Canister Steam Vacuum ?

Polti 1500 no steam just droplets of water

\015 Just bought a polti 1500 from ebay. supposed to be working fine but alas no steami have tried descaling itthe hose must not be blocked as i poured water through itthe water heats up finejust a clicking noise as press the handle but no steamjust wondering whether i can fix it easily or i will have to send it back which is very costly and inconvenientplease help me\015

Answers :

Before trying anything else make sure you turn up the pressure control knob in the direction of the + sign if it is turned right down you will have steam in the system and the gun will be heard to click open the flow control valve but you will not get any steam because the control screw is set too low just turn it anti-clockwise to increase the flow and your good to go .I hope this helps I have one too and I some times forget to turn up the flow and wonder why for 3 minutes then realise that during storage and manuevering it gets turned down by accident and i turn it up and all is well again.
Hello, i had also the same problem.
\015\012i disconnected the hose. there is a small hole where the hose connects.
\015\012i put there a litlle screwdriver in few times in and out. and then the steam came.
\015\012the polti must be switched on and heated up before you de this.
\015\012be carefull, when you put the screwdriver in, the steam can come on your hands and face.
Repair Help & Product Troubleshooting for Polti Vaporetto 2400 Canister Steam Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Polti 1500 no steam just droplets of water


Before trying anything else make sure you turn up the pressure control knob in the direction of the + sign if it is turned right down you will have steam in the system and the gun will be heard to click open the flow control valve but you will not ge ... Polti Vaporetto 2400 Canister Steam Vacuum

The steam polti 900 hand gets very hot and steams water out


... Polti AS800 Canister Vacuum

My polti vaporetto 2400, heats the water up, but the steam wont come out - help


... Polti Vaporetto 2400 Canister Steam Vacuum

Polti 2400 - fault --heats up to temp.but will not generate steam although you can hear the the click when steam lever pressed all get out is a small trickle of water . any answer ?


... Polti Vaporetto 2400 Canister Steam Vacuum

I have a Polti leco aspira 710. The water in the tank is heating but when the trigger is activated no steam comes through. The machine is showing one green light and is emitting a continuous beep. The vacuum cleaner is working fine - but no steam at all


... Polti Vacuums

Polti 2400 water will not heat - Polti Vaporetto 2400 Canister Steam Vacuum


It is more likely that the thermostat is not working than the element to have gone. needs stripping and checking then the faulty part to be replaced ... Polti Vaporetto 2400 Canister Steam Vacuum

Water leaking at bottom of machine - Polti Vaporetto 2400 Canister Steam Vacuum


... Polti Vaporetto 2400 Canister Steam Vacuum

How to descale a polti AS700? It heats up well, but runs out of steam before the water. There is sludge in the bottom of the tank.


... Polti AS700 Canister Steam Vacuum

Have a polti vaporetto 2400 been used 3 times approx but out of warranty heats up ok but wont release steam when trigger pressed.have tried flushing water in tank with no results


These machines like to be used regularly. if allowed to sit (especially after using tap water) they may buld up lime deposits on valves and cause them to stick. you could try filling with vinegar and let set, also tilt it so vinegar runs into valve a ... Vacuums

Have a Polti steam iron with sparate water tank. Need to replace the iron part but can't remove the screws from the bottom of the tank part! The seem to have 6-pointed star-shaped slots.


... Polti Vaporetto 2000R Vacuum

Blowing fuses I got a loan of a Polti 2400 steam cleaner. I feel I may have overfilled the water canister. Might that have caused the fuse to blow each time I switch it on?


... Polti Vaporetto 2400 Canister Steam Vacuum

Water isn't heating up in my Polti Vaporetto steam cleaner, although the lights come on on the switches ok. I live in Belfast, can u advise where I can go for repair please. Thanks Philip.


... Polti Vacuums

Polti forever 600 when I push button for steam water comes out from underneath container


... Vacuums

Thermerstat iron leeking water - Polti Vaporetto 2400 Canister Steam Vacuum


Hi,Here is a tip that will help you with that problem...My Steam Iron is Leaking Water http://www.fixya.com/support/r5301301-steam_iron_ ... Polti Vaporetto 2400 Canister Steam Vacuum

How does the cap open to put water in - Polti Eco Pro 3000 Canister Steam Vacuum


You push down and hold it down while turning, keep turning till it is off. Same as puting on ... Polti Eco Pro 3000 Canister Steam Vacuum

Got a Polti Mondial Vap 2000 steam cleaner, hasn't been used for a while the knob where you put the water in won't undo do you just turn it or is there a special way to open this?


... Vacuums

Polti vaporetta comfort steam cleaner...no steam


If you put two much water in it it wont steam ... Vacuums

Polti Vaporetto 1500 Unable to unscrew polti safety cap. ( nothing to do with steam as machine not turned on yet)


... Polti Vaporetto 2400 Canister Steam Vacuum

November 2008 I bought a Simac Stirella 9000D steam generator iron. Recently its been leaking water out the bottom of the regenerator. It makes a noise when it is trying to get the steam to the iron and it works then but afterwards when the noise stops it stops steaming and I find a puddle of water underneath the regenerator. Also a little steam comes out of the water tank at the top. I understand this is happening because of scale in the base unit. Can I get something to get rid of the scale? -


... Vacuums

My Delonghi DSS50 steam floor cleaner water reservoir has a broken valve on the bottom where it fits into the steam unit. It leaks water rather than producing steam. I would like to find the valve and replace it or buy a new water reservoir with the valve in it. I cannot find the part I need. Can you help me?


... DeLonghi DSS50 Scopa Upright Steam Vacuum

We bought a Philips Intellicare 8030 ironinng system in 2005. Two days ago water from the plastic water container does not go inside bigger water tank where we think the water gets heated up. When the heating tank is empty there is no steam that comes out of the iron. Also, there is water dripping off profusely from under the iron where the steam normally comes out. Can you please advise how we should remedy this problem Please advise which service centre in Sydney, Australia would we be able to


... Philips Vacuums

Hello i can turn my steam buddy platinum 44G258 on, water boils, press hand gun get a buzzing noise like you do with a jet wash, but no steam comes out, it seams the water is not coming through, have check the cap on water container thats ok, its where it releases the water to is seams to be where the problem is, i think ! first time we have tried to use it many thanks steve.


... Vacuums

Polti Vaporetto 2400: Water out light comes on when tank is full


Hi you need to put 5ml of Kal Stop fo Polti machines into 1000/1500ml of water into the tank, The stronger solution is better (1000ml) Let it heat up and this should break down the limescale on the solenoid. I tried this today and it has worked sav ... Polti Vaporetto 2400 Canister Steam Vacuum

My shark steam mop has stop producing the steam to clean. I only get a little water to come out to wet the cleaning pad. Is it stopped up and if so how do I get the steam and water flow back


Dear Sir/Madam\012\012Good day.\012\012We're Auto-parts manufacturer from China. We are able to supply Axles & Axle tubes , Grease Nipple,Brake hose , Auto Springs, and some other fittings. If you have any requirements about auto- ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

My Tefal steam iron (Pressing Compact) blew a fuse. There was water in it and it had been used for about 15 mins. It had been leaking small amounts of water through he steam holes.I changed the fue and emptied as much scale as I could, refilled it and switched it on.Now it works but pours lots of water onto the clothes, making it impossible to use!


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0414 seconds