Having problems with your Pro-Team ProTeam 15xp ProCare Vacuum with Tools NEW ProTeam 1500xp ProCare Vacuum LOADED tools warranty Pet ?
Procare vacuum beater bar does not work
\015 Beater bar will not run when attachment hose is not in proper position\015
Repair Help & Product Troubleshooting for Pro-Team ProTeam 15xp ProCare Vacuum with Tools NEW ProTeam 1500xp ProCare Vacuum LOADED tools warranty Pet
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Procare vacuum beater bar does not work
... Pro-Team ProTeam 15xp ProCare Vacuum with Tools NEW ProTeam 1500xp ProCare Vacuum LOADED tools warranty Pet
I have a DC25 that I just bought in Dec 10. The last few times I vacuumed the carpet, the beater bar worked on and off. Now it does not move at all. I took off the beater bar to see if there were any obstructions, but there were none. Could you please help me with this. Right now my husband is saying that we should not have bought such an expensive vacuum (which he has said all along). I want to prove him wrong!! Up til a couple of weeks ago, it was working perfectly and I have loved it!
This is a good quality machine which I am sure wil last a long time in answer to your question make sure that the setting is set for carpet and not just flooring ..the head needs to be flat on the floor for the beater to work .I am assuming that thi ... Dyson DC25 All Floors Bagless Upright Vacuum
My beater bar on my Kenmore 116.25615506 canister vacuum keeps turning on and off when I vacuum rugs. The suction continues, but the beater bar seems to be shorting or whatever. I checked the belts and they look like new. Any suggestions? The rest of the vacuum works fine!
... Kenmore 25512/ 25513 Progressive Canister Vacuum
My beater bar does not work on my vacuum. The problem is not in the hose or the attachment, because I connected to another electrolux vacuum and it worked. So the problem must be in the canister.
It's most likely a loose wire in the canister then. I recommend taking the whole vacuum to an Aerus Electrolux store and letting the service tech check it out. They can find out the problem quickly.\015\012Be aware they may try to sell you a ... Electrolux UltraLux 2000 Bagged Canister Vacuum
The beater bar seems to have worn and is loose. (very noisy) the vacuum still works but the beater bar rattles.
Not sure how I can help, as it seems you know what the problem is! Fit a new brush bar! On some Dyson models (not sure if the DC17 is one of them) you have to fit a new sole plate at the same time - they are supplied together as a kit. Good luck. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Beater bar not working on Halo vacuum
Check the bar to see if there is a buildup of hair or string causing it to jam, ... Vacuums
My son dropped the vacuum down the stairs and now the vacuum works but the front part of the vacuum does not drop back down when vacuuming any type of floor. It slowly drops and does not stay on the carpet. hope this makes sense. I have cleaned filters and suction seems strong at the small hose. the beater bar rotate very fast still.
May be part missing. this is unit has 5-year warranty.you can send to service. ... Dyson DC07 Bagless Upright Cyclonic Vacuum
Kenmore vacuum model 116.52450200C- beater bar not working
... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum
I was vacuuming with my DC28 Animal and all fo a sudden the beater bar stopped working and NONE of the floor mode buttons work.. no lights or anyhting. I checked for obstructions per the Dyson manua
... Dyson DC28 Animal Bagless Upright Vacuum
Terrible noise My dyson was working great then started making this horrible noise. I cleaned the bar but noise is still there. I discovered the beater bar went around three passes then froze and started horrible noise again. my husband got the bar turning but after 2 swipes vacuuming it did it again. Can it be fixed or is it time to retire it and buy a new one. Wendy Kiser
That noise is the clutch. A very expensive part and very hard to replace. When a problem with the clutch happens it's generally not worth the time and money to replace.I suggest getting a different type of vacuum, maybe a Miele or Sebo. W ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
Electrolux oxygen canister vacuum beater bar attachment not working
... Electrolux Vacuums
Wiring the switch for a kenmore vacuum cleaner I need to know where teh different colored wires go. It had a short in it so I replaced the plug but think I wired it incorrectly. Its a Whispertone 300 model 116.28612790 The canister works but the beater bar doesn't.( it worked before a rewired the switch. Thanks
... Kenmore 23313 Whispertone Bagged Canister Vacuum
Beater bar has been rattling when running the vacuum. Stopped working all together today while vacuuming.
Hi\015\012The rattling sound is permanent and is supposed to alert the owner that the drive belt/clutch has come undone. Sadly it also means an official repair as the Animal has a protected belt that can't be repaired by the owner. ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum
Beater bar not working. suction not working - Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
Check for a broken beater brush belt.\015\012Clean the beater brush, clear of all debris and add some WD40 at each end where the rubber holders are. Turn beater brush by hand to work the WD40 into the axle.\015\012Reassemble making sure the belt is ... Dyson DC07 All Floors Bagless Upright Cyclonic Vacuum
Beater bar dyson vacuum Works intermittently - Vacuums
BEATER BAR QUIT WORKING ON DYSON DC07 VACUUM CLEANER - DIDN'T KNOW IF THERE WAS A RE-SET SWITCH OR HOW TO GET THIS TO WORK AGAIN
Hi its Darran at Dyson. From your description of the problem, either the brush control has been switched off (dial on the side of the cleanerhead) or the belt has snapped which may indicate a problem with the clutch. Please ca ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
I purchased a Eureka C4910 last year and have a question that I am hoping you can answer. There are two motor actions with this vacuum, 1) the vacuum suction, and 2) the beater bar. The action of the beater bar is that motor is supposed to automatically shut off when the handle is in the complete vertical position assuming the vacuum is stationary, but then turn on when the handle is tilted toward the floor, assuming the vacuum is moving back and forth. The beater bar motor turn-on mechan
Good day!Normally when the motor is easily moved back and forth means that it have a proper lubrication,proper alignment and no clogs.When the motor and the belt is OK the problem could be on electrical wiring and switch ... Eureka C4910 Bagged Upright Vacuum
Vacuum turns on and suction in hose works, beater bar won't turn
If you hear the motor in the head running and the beater bar isn't rotating, you probably need a drive belt. With the power off, make sure you can rotate the beater bar freely by hand, if it isn't bound up.. then locate and remove the baseplate screw ... Eureka Vacuums
Roomba beater bar not working - Vacuums
Beater bar stopped working - Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue
Here\012 is one of my Tips on the problem you are describing:www.fixya.com/support/r6311178-vacuum_brush_bar_not_spinningIf\012 you have further qu ... Kenmore Progressive Upright Vacuum with InteliClean System Slate Blue
Eureka 3041BZ beater bar not working - Eureka 3041BZ Upright Vacuum
... Eureka 3041BZ Upright Vacuum
Eureka 3041 beater bar not working - Eureka 3041BZ Upright Vacuum
... Eureka 3041BZ Upright Vacuum
DC07 hose has plenty of suction. Main hosuing has no suction. Beater bar turns fine and works so well creates positive air pressure blowing outward instead of vacuum. Any ideas?
Main housing has no suction becouse of bloakage in it. UPLUG the unit from mains, and remove the bottom (main housing)cover. Clean all you can access and put everything back together. In all the vacuum cleaners all the problems is caused usuall ... Vacuums
The beater bar doesn't work - Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
You need to replace the belts. Here are the belts you need:Dyson DC14 Belts ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Dyson vacuum beater bar takes a while to start working.
Hi there, \015\012SmartAlec from NelsonVacuums.com.au here. If there are no bad sounds or smells when you are engaging the bar then it is a sign that your belts are s ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum