Having problems with your Rainbow 75th Anniversary Canister Vacuum ?
How much water goes in the tank?
\015 I know this is a silly question, but I borrowed this vacume from my Mother-In- Law, and she told us to fill the tank up over the little bump. Do you actually cover up the bump or do you leave the top of it above water? I'm not sure what you call the little thing that protrudes up in the middle of the tank, but that is what I'm calling a bump! I'm sure if I had the manuel that came with the vacume I would know how much water it takes. I don't really want to question my Mother-In-Law's intelligence by asking so can someone help me out? There is a fill line on the tank and it looks to me like it's under the bump. My husband thinks that it is over the bump!\015
Water has to be level with the tip of the bump. 1/8 of the inch above or under - would not make a difference.
Repair Help & Product Troubleshooting for Rainbow 75th Anniversary Canister Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
How much water goes in the tank?
Water has to be level with the tip of the bump. 1/8 of the inch above or under - would not make a difference.Good luck,Rocky:-) ... Rainbow 75th Anniversary Canister Vacuum
Need instructions how to use Hoover Steam Vac Spin Scrub. I borrowed it from my Sister and she left it with no instruction book or letting me know how to operate it. I put water & cleaner in top tank. That's all I know to do. Do I put any water in bottom tank? I figured not, since that is probably where the water goes when sucked up by vac. Do I leave lid on bottom tank? I usually use a commercial cleaner, and this is very different. I need to know NOW, as I must return it to her today, and I'm
I did have a solution in just a few minutes. Someone responded with a solution that gave me the website where I could go and print the manual in pdf, so did that, and checking instructions I was able to clean my carpets and get the shampooer back to ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
I put boing water in my water tank for my bissel quick steamer it does not want work right any more i need to know how much would it cost for a new water tank, and how i might be able to order one, as well as a free manual
Hi and welcome to FixYa. I am Kelly \015\012\015\012Here are all the parts for your machine. \015\012Click on "read more" for price details \015\012\015\012 ... Bissell 8930M Upright Steam Cleaner
Can't find info for hoover steam vac spin scrub model # F5905900 on Hoover website, doesn't show that model number at all...looking for mesh (kind of cone/cylinder shape) that goes in dirty water tank (I think) and also the tool (wand) that slides into front to clean it out. It doesn't pull all the water up very well and the filter has been missing for some time. I don't know if that has anything to do with it or not. As far as the wand tool goes, I have taken the cover off at this point and
The cleanout tool is part # 43514001. The filter is # 90001398. Be sure to leave a 1/2 inch gap between the top of the filter and the bottom of the lid. If you need a manual, try model F5914-900 0r F5912-900 on Hoover.com ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum
Carpet Powersteam water tank no dirty water goes in
... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
I own a Bissell Proheat Pet Model 8910. After just a few uses and changing both the brush and pump belts (trying to resolve problem) carpet doesn't get wet any longer. Carpet solution comes out normally but the water barly leaves the section of the tank I fill water into, resulting in carpet recieving to much solution and not enough water. Any advice?
... Bissell 8910 ProHeat Clear View Upright Vacuum
Vapor Clean TR 5 Under "maintenance" they told me to unscrew to empty refill tank. After doing that, no water came out and the piece that the scew went into is now in the tank. It is too large to get out and even if you put the screw back inti that piece ir still goes into the machine. Can I still use the machine? brand new only uded it once
I is really needed to check this with the manufacturer! See contact details below: ... Vacuums
Brushes won't turn on the bissell proheat 2X steam cleaner-I don't have the manual to see if there is a button I am not pushing to turn on the brushes. Also, do you put the clean water in the "bladder" in the tank? Sorry I am so dumb-this cleaner was given to me with no manual and I can't figure it out. There is a small tank on the bottom at the back of the machine, that says "formula here" and I don't know if that is where the cleaner goes or what that is for. The machine turns on just fine
... Bissell 8910 ProHeat Clear View Upright Vacuum
Using my hoover steam vac tonight and too much water coming out. once it's turned on, water and shampoo continuously come out underneath until tanks are empty. looks to be leaking from left side bottom as looking at it standing behind the unit
Make sure that you have filled everthing properly and the hoover steam is in a good condition. or check else is there any loose coonections in the bottom of the hoover, which makes the tank empty.if the problem persists take it to service. ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum
Picture you sent for me is not the same model as I have mine is a dual vac v carpet cleaner with the solution tank on the side of clean water tank so I need to know how much solution to put in solution resevoir.
The solution tank injects the cleaner depending on the selection you have make such as light or heavy. You fill the tank with cleaning solution. ... Hoover Steam Vac Dual V w/ SpinScrub Vacuum
Can't get the cork to open....and can't find the booklet...also...how much water goes in?
Request operating instruction for model no. sc 618 ... Euro-Pro Ultra Steam SharkTM II Hard Surface Steam Cleaner Vacuum
I've cleaned out the tank that the dirty water goes into but still have a horrible smell coming from the vac, what else can/should I clean and how?
Check your hoses ... u mite have something stuck to the side of it ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum
How much water goes in my proaction handheld steamer
How much water goes in the ultra steam shark 2?
... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum
Have a Bissell Power Steamer Upright Deep Cleaner - Dirt Livter PowerBrush. Model 1895 The water tank 'must' have been dropped and is cracked too much to use. Can I get a replacement?
... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum
Black valve I've taken the black rubber valve out of the dirty water tank and now I'm not sure which way it goes back in, on which side?
... Bissell 1425 Little Green ProHeat Handheld Steam Vacuum
I own a Hoover Steam Vac V2 deep cleaner with Auto Rinse feature. The Model Number is not available ex: was on the bottom of the machine and the sticker is completely worn off the machine. I am having a problem with the bottle you fill with detergent ex: this bottle is seperate from the main clean water tank. THE PROBLEM: The little plastic part that goes in the bottom of the bottle has an "O" ring ex: cone shaped with a spring.....it keeps falling out. Can you supply a part number for this
Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=641300\015\012Generic problem for all Vacuums\015\012I own a Hoover Steam\015\012Posted by w_brennan on ... Vacuums
I have an older Wega 2 group espresso machine. Looks like a date of 1992 on the group head, but not sure. This has no model name that I can find. Anyway, when I turn it on I get all lights flashing after it heats up 5 minutes or so. I do get nice steam from the wands. I drained teh tank and found a little scale, but not much. I took apart the group heads and cleaned them thinking it may be a clog there, but that doesn't seem to have worked. Also fwiw the water level float is not visible and whe
For a new fridge, need more time to maintain the required temperature of the fridge abut mainly the goods in it? So everything seems normal. The time will be reduced day by day since the goods will stay for longer time in and door opening will bec ... Vacuums
How much water goes in the vaccuum
Hello,I have a simular model. Here's what I do.On the fill tank (that's the top tank), look on the front and you'll see where it says "Fill Line". Fill this with hot water first (so it doesn't foam up) and then add your cleaning solution ... Hoover F5866-900 SteamVac Deluxe Wet/Dry Vacuum
Water heats up in tank. Light goes on, showing it's ready, but no steam is emitted through hose. Waited several hours.
Sounds like the switch on the hose has gone bad. May want to try taking hose to your trusted local electronics shop. They may be able to open it up and test it for you. Good luck. If you ever find where to find parts (I am looking for the tip and ... Saeco Supervapore 2500 Steam Vacuum
I'VE LOST THE MEASURING CUP FOR MY STEAM BUGGY, HOW MUCH WATER AM I SUPPOSED TO PUT IN THE TANK?
... Tristar SB Steam Buggy Vacuum
Uses too much solution and it goes into the clean water
... Bissell 1698 PowerSteamer ProHeat Upright Wet/Dry Vacuum
I have a Bissell Proheat 2XTurbo carpet cleaner. No water will come out when I squeeze the trigger. I have filled the solution tank and the water tank. I read the troubleshooting in the manual and have tried turning it off for a minute and restarting and nothing. I took out both tanks and reseated them and nothing. It has sat for over a year but did not have any water in the water tank. Some solution was left in the solution tank. How can I make the water come out? HELP!
Call BISSELL Consumer Services.\015\0121-800-237-7691\015\012Mon-Fri: 8am to 10pm ET\015\012Sat: 9am to 8pm ET ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Hoover SteamVac Model F6056-900 SteamVac/SpinScrub. Indicator light and high pitch suction noise indicates that dirty water tank is full. However, water level indicator (yellow bobbing plastic thing) is at the bottom of the tank and there is no water in the tank. Have check all the hoses for clogs, none found. Checked water port from motor area to receptacle tank for clogs, none found. Fixed broken hose to upholstery wand with duck tape, (wire not broken, just cracked plastic hose). The onl
There are 2 filters, make sure they are clean, one is on the tank lid, the other is from the bottom, it is red, pull it out and clean it. If yours has a foam filter on the tank lid covering the yellow ball, make sure there is at least a 1/4 in. gap ... Hoover Vacuums
The Hoover Steamvac Widepath will NOT pick up water. The dispenser with cleaner DOES have water. The TANK that would receive the dirty water is NOT full. All tanks are on properly and the machine will still not pick up the used water. I found a tear in the interior hose leading to the receiving tank and repaired throughly with electrical tape. Still will not pick up the water. Any suggestions?
Sounds like a clogged air path (no vacuum action) from the floor pick-up to the collection tank. Take the tanks off and deal with the vacuum problem alone. The collection tank should have a air exit vent--is it clear? Check the interior hose that you ... Hoover F6213-900 SteamVac Agility TurboPOWER Steam Vacuum Vacuum