Having problems with your Rainbow E series Canister Wet/Dry Vacuum ?

Wattage thank you for your recent information I went to buy a transformer for my rainbow e series vacuum and they asked me the wattage of the machine do you have this information?


Answers :

For most appliances, the wattage is mentioned in the owner's manual and also on a tag you might find some where on the device it self. it will mention the voltage, amperage and wattage. if the wattage is not specified, you can get it by multiplying the voltage times the amperage.
wattage = voltage x amperage.
only get a transformer of an equal or greater wattage than your vacuum.
Sorry I don't. but E series owner manuals. I don't know if it says in them or not, but you can here to take a look:
\015\012http://www.rainbowsystem.com/manuals/
\015\012
\015\012Or you can maybe contact them direct.
Repair Help & Product Troubleshooting for Rainbow E series Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Wattage thank you for your recent information I went to buy a transformer for my rainbow e series vacuum and they asked me the wattage of the machine do you have this information?


For most appliances, the wattage is mentioned in the owner's manual and also on a tag you might find some where on the device it self. it will mention the voltage, amperage and wattage. if the wattage is not specified, you can get it by multiplying t ... Rainbow E series Canister Wet/Dry Vacuum

I have designed a machine for cleaning and harvesting using a centrifugal fan. The flexible hose is 203mm Diameter and 5 metres long. How can I calculate the vacuum pressure this machine creates at the end of the hose? I would like to use this information in the advertising and to compare with other similar machines. Thank you Alan Churchill [email protected]


See this can help youhttp://www.npl.co.uk/server.php?show=ConWebDoc.1377Sergio ... Vacuums

Ineed to find where to buy for a upright vacuum cleaner series 4750


Check your yellow pages for vacuum repair shops, also alot of Sew and Vac stores offer repair service. ... Vacuums

Where can i buy the filter for this machine? - Euro-Pro EP600 Bagless Stick Cyclonic Vacuum


... Euro-Pro EP600 Bagless Stick Cyclonic Vacuum

How to replace just the Kirby 210097 Hose End For G5 Series Vacuum Cleaner to hose. can buy replacement but can not get the broken end off


Simple and rquires no tools. Fill your sink with hot water and set the end in water with attachment on it. Within a few minutes the end is soft enough to slip out. setting the hose end in the water again will let you simply slip the hose into the ... Kirby G5 Bagged Upright Vacuum

Have a rexair model D series vacuum cleaner that worked fine until recently. Started making noise and then started smoking/overheating. I took apart the machine cover and am unsure how to get it tore down to see the motor or belt in there. Please help!


Below I have listed a link to the manual that has instructions on how to change your belt and a link for the replacement belt you need. ... Vacuums

Hello Jenny, I need the manual of consew 206rb-2, you can send me to me e-mail. I wanna buy this machine for $400 and need information, Thanks, sorry my english form Costa Rica Pura vida


... Vacuums

WHERE CAN I BUY THE HOSE FOR THIS MACHINE? - Vac Buggy CB962 Canister Vacuum


You can probably find a universal hose at one of the Big Box hardware stores. ... Vac Buggy CB962 Canister Vacuum

Small office and am tried of buying vacuums every year. Rug and tile flooring. looking for specs on the Hoover U6485-900. Want to know the AMP, wattage, airflow, HEPA, water life of 90 inhces or more? Basically lookiing for detailed specs and/or recommendations


I f you are serious about getting a machine that will last you a long time I recommend you go and get your self a Tri-Star. This is a high end ... Hoover U6485900 Bagged Upright Vacuum

I have bought new Hoover bags on two occasions. The first spares I bought were the Xxxl variety and I didn't think they fitted that well. The next spares I bought were the type g megafilt. I still feel like they do not fit that well and the suction power on the vacuum is not as good. I'm I buying the correct replacements? I followed the guidelines on the Hoover bags the vacuum came with. These were printed as the right bags to buy. I only have the vacuum around a year and thought it was brillian


... Bosch BSG71310UC Bagged Canister Vacuum

I have an electrolux genesis upright vacuum that I bought used about 8 years ago. It has been A great vacuum the best I ever had. I thought the belt had come off so I took it in for repair. They called today and said that the brush rotor motor was bad and it would be around 148.00 dollars to repair. My question is could I buy the part and have my husband replace it or would it be too complicated. Can you still buy an electrolux vacuum comparable to this one and how much are they. I love this vac


... Vacuums

Rainbow E Series Vacuum


It's plugged!\015\012\015\012If it happened suddenly, you have a jam somewhere. Unhook the hose to see if it's in the hose or the unit.\015\012\015\012If it happened over time then it's likely dirty or full. Wet dirt can acc ... Rainbow E series Canister Wet/Dry Vacuum

Pensare Vaccum Hi: I have an older Pensare hand held vacuum. It's the T-Rex, mod # 1505. My daughter lost the filter with the plastic frame around it that goes inside. I love the vacuum, it works great, so I don't want to buy another one and add to the land fills. Can I buy a replacement filter for it? Thanks! Autumn Moore 503-481 1817


... Pensare' Rocket V17201 Handheld Vacuum

Vacuum leaking? on the lower left of the back of the machine, there is a molded round piece about the size of a half-dollar. when I tirn the machine on and cover this round extrusion, vacuum power increases. what is it?


I don't know your particular model but it sounds like this is either where the hose attaches or a spot to help clean out anthing that might get stuck in the hose while vacuuming. Hope this helps! ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

Vp 540 keeps printing magenta over print - Vacmaster Vacuum Pack Machines: VP540C Floor Model Vacuum Packaging Machine


... Vacmaster Vacuum Pack Machines: VP540C Floor Model Vacuum Packaging Machine

I have a Model 116.35922500 Kenmore upright vacuum cleaner. It makes a loud air noise when using the vacuum. I have disconnected and removed the hose to see if anything is lodged in the hose and it appears clear. It makes the noise when the hose is connected. When I remove it, the noise stops. When I place my hand over the hose, the nose re appears. I sounds as though the noise is coming from the fan or internal parts of the machine. So, when there is a load or pull on the machine, it mak


... Kenmore Progressive 35922 Bagged Upright Vacuum

Rainbow E Series Vacuum


Is there suction at the vacuum, without the hose hooked to it? If there is, then your hose may be clogged, if not, it is possible that the corrugated filter may be clogged up. You would have to remove the top to get to it. ... Rainbow 75th Anniversary Canister Vacuum

Hello, I have an Electrolux vacuum. In desperation, I vacuumed up some water and my machine stopped. I am hesitant to take the machine to a repair place for fear that if it is a simple repair they will not be honest. Can anyone give me advice on whether this is a problem that requires a new motor or major repair? Thank you!


Although it's never to be recommended, it is sometimes possible to vacuum up a little water without doing significant damage. However, the fact that your machine then stopped suggests that the electrics got wet. That may or may not have caused expens ... Vacuums

Ive inherited s skeltons sewline 35 sewing machine and have no manual or information on what any of the dials are or how to use the machin and can find no information on it


... Vacuums

Vacuum cleaner I am needing to buy a vacuum cleaner - the flooring in our house is mainly oregon pine with loose rugs. I suffer from back problems and find the cylinder vacuums cause a great deal of back strain. I have been told that an upright vacuum is not suitable for wooden floors - I would appreciate any advice, particularly if u know of an upright vacuum cleaner that works well on wooden floors Thank you


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=517227&thid=728380\015\012Vacuum cleaner\015\012Posted by che9 on Jul 01, 2008\015\012I need to buy a vacuum clea ... Electrolux EL7055A Bagless Canister Vacuum

Unbeknownst to me, someone took the bag out of my Kenmore Progressive vacuum and failed to replace it. I have been vacuuming without a bag for months, and today the vacuum stopped sucking. When I opened up the front to replace the bag, tons of dirt and dust came pouring out. I thoroughly cleaned the vacuum, put in a new bag, but still no sucking power. Just dust coming from the rear vents where one of the filters is. Is the vacuum ruined, or is it a simple solution of buying a new filter?


Sounds like you need to buy a new motor. All that grit and dust will ruin a motor and I'm surprised it lasted as long as it did.\015\012This is where a vacuum that won't run without a bag would have been nice. (Aerus for one) ... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

We have a Singer 626 sewing machine. It's an old mechanical machine with heavy metal parts. The stitch selector was stuck, I removed the top and helped the selector to move. when I had to move the selector again, it was stuck and I pushed too hard and broke a component. I can fix the machine if I had a repair manual. I need to buy a repair manual. How and where can I get one? Thankjs Charlie PS. Im pretty mechanicly inclined and I was able to clean the machine and get it to work after


... Vacuums

Clogged vacuum Rather stupidly, my boyfriend 1) were vacuuming without a bag and 2) vacuumed up a big piece of cotton from a sofa cushion. And now it's making a horrible noise and I see it vibrating where the tube connects to the machine. When you look inside there's a white thing sticking out but it looks like it's part of the vacuum. If it's a clog, how do you fix it? I tried unscrewing the tray the bag sits in but it won't budge.


You can start by taking off the bottom plate or top cover, which ever comes off, that is where the inlet starts going in and hopefully the clog is there. Could be in the hose also. But without the complete model number I can't look it up to see a p ... Kenmore 31912 Progressive Direct Drive Bagged Upright Vacuum

I have a Simplicity S24 canister vacuum. It's about 3 yrs. old. In the past year I have had it in the shop 4 times because when using the rug piece, the piece turns on & off, on & off. The actual vacuum doesn't... just the rug piece. I recently spent $65 on a new part, after spending countless dollars the other 3 times it was in the shop for this problem. I'm ready to buy another name vacuum altogether as I feel this vacuum is not worth the money that was spent on it. I'm very frustrated.


Repair shop has not fixed the problem? complain until they fix it properly. This is a pressure fault / jamming issue or slipping drive. Repair shop should have fixed it 1st time. ... Vacuums

The ultimate g series kirby vacuum,,the spinner wont attach to the head?


... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1208 seconds