Having problems with your Rainbow E series Canister Wet/Dry Vacuum ?

Rain bow E series power head

\015 I had to take the power head handle apart to unclogg the hose. I have on wire with a protective sleeve on it that conects to the plastic handle but the other end I did not see where it hooked to and cannot figure out where it hooks. Can anyone help. \015\012Thanks\015

Answers :

\015\012Here is a pix of it.
Repair Help & Product Troubleshooting for Rainbow E series Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rain bow E series power head

\015\012\015\012Here is a pix of it. ... Rainbow E series Canister Wet/Dry Vacuum

Rain bow E series power head

Maybe these pictures will help, I think your wire broke off by the hose.\015\012\015\012\015\012\015\012\015\012 ... Rainbow E series Canister Wet/Dry Vacuum

E series power head handle, internal wire came lose

Here is a pix.\015\012\015\012 ... Rainbow E series Canister Wet/Dry Vacuum

I Have two questions concerning my AIRVAC AV2500 Red Series Vacuum System. How do you replace the light in the floor power head sweeper and can you replace the permanent fabric filter? We had the system installed in 2004 and the light in the sweeper head just went out and can not find any manual on line on how to replace it. The filter if not torn but avter 6 years it probably needs some kine of cleaning or replaced even though it says permanent. Any help would be appreciated. Jim McCluskey

... Vacuums

I have a Series G Kirby Model G7D. The other day when I was vacuuming all of a sudden the TechDrive (Power Drive Assist N/D) pedal fell off. I see the hole that it goes into but when I put it in it's loose and falls out and doesn't control the power drive anymore. When I shook the vacuum I heard something rattling around inside the vacuum head. So I unscrewed the bottom and looked inside and found a small metal part labeled K3 on one side and T on the other side. It looks like it would fit

Hi, I have a Kirby G4 and i'v replaced the carbon brushes myself using a step by step guide however since its been back together it worked for about five minutes it then started sparking from the inside!!(a lot!!) I'v obviously touched something i sh ... Kirby Ultimate G Bagged Upright Vacuum

Have an e-series rainbow. Belt and brush bar have been replaced in power head. But the red reset button can still be pushed and it is not staying going like it should. May it be the motor?

... Rainbow E series Canister Wet/Dry Vacuum

Power head barely turns - Rainbow E series Canister Wet/Dry Vacuum

Need more information but if you are speaking of the brush roll, it is possible that you need a new belt. You should change your belt at least once per year.Rai ... Rainbow E series Canister Wet/Dry Vacuum

Where can I get a new power head motor replacement for SE series,original motor GS ELECTRIC 5570-02-1 in UK or Ireland,Thank you,Liam.

... Rainbow E series Canister Wet/Dry Vacuum

Power head barely moves - Rainbow E series Canister Wet/Dry Vacuum

<p>Need more information but if you are speaking of the brush roll, it is possible that you need a <a rel='nofollow' href="http://www.rainvac.com/belt-pnozzle">new belt</a>. You should change your belt at least once per year.</p& ... Rainbow E series Canister Wet/Dry Vacuum

E series power head handle, internal wire came lose

Think it comes off of the hose. Maybe it broke off. ... Rainbow E series Canister Wet/Dry Vacuum

How can you take the top of a rainbow D-4 series to repalce the plug for the power head? I can't find any screws to take out

This is a time consuming jod. You will need to carefully peel back thew rubber gasket around the separator . Underneath you will find several hidden screws.Loosen them off. With the separator removed you will be able to loosen the upper body and moto ... Vacuums

Rain bow e series vacuum- will run for short time then shuts off

... Rainbow E series Canister Wet/Dry Vacuum

Power head not working - Rainbow E series Canister Wet/Dry Vacuum

Check connection from hose to the main unit. Very important to make sure that the hose has a solid connection to the front of the machine. If not, then the receptacles can't make good contact to allow the power nozzle to turn on.RainVac ... Rainbow E series Canister Wet/Dry Vacuum

Power head not working. - Rainbow E series Canister Wet/Dry Vacuum

Need more information. If your version has a red light, check to see if it comes on. If it does, then your circuit breaker is bad. If it does not, then you have an electrical problem most likely with the hose. Let us know.RainVac ... Rainbow E series Canister Wet/Dry Vacuum

My power head (carpets) does not rotate at all. I have called Dyson and they walked me thru a series of steps to make the roller move, which initially worked, but now when it rolls it's really slow and stops rolling.

... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The motor on my Epic 6500 works, the hose is sucking, but the power head isn;t working... I tried the sidestep power head and that one works. Ive opened and replaced the belt and that is fine. The bulb was already burned out and wasn't replaced so I cant tell if theres power to the head. What else could it be?

Connect the power nozzle directly to the hose and try.\015\012Check the terminals where the wand connects to the PN. If any are discolored or cracked, that may be the problem.\015\012Open the PN and check for loose or broken wires and co ... Electrolux Epic 6500 Vacuum

Power head attachment works great when plugged into the hose part of the vacuum. The problem is when I attach it to the tube for normal use there is no power. I have checked all the connections and switched the power switch on and off still no power from tube to power head. Is there anything else I can try? Model Callisto

Try having someone turn the machine on and off while you pull the cord in and out with the cord more angled towards the on/off switch. Sometimes these models have a break in the cord rewind and will not put the power through to the motor. ... Miele Vacuums

Royal vacuum cleaner model 4600 wiring diagram I have a Royal Vacumm Power Tank Model 4600. I replaced the switch (6 wire - 3 position) that is on the tank. One side of the switch control just the blower. The other side control the blower and the POWER head - wand with a variable control speed. The middkle position is off. After I installed the swith, the power head - wand is powered in either position. There are three wires comming out of the wand: White, Red and Black. I guess I wired somethin

... Vacuums

Miele Blue moon vacuum motor surging on and off and power light flashing. After many surges of the motor (on->off->on-> off etc), the motor no longer attempting to start as ferquently ie. now off for many seconds and may turn on for 1 second.. sometimes stops turming on and just power light flashes. There is also no voltage at the plug for the hose for the power head. I noticed that the vacuum first started having probs when hair was caught in the power head and the ovetrheating light went on

... Miele Blue Moon Bagged Canister Vacuum

Our Electrolux canister vacuum just stopped working when we were vacuuming the floor. The power does come on when the power head is attached but as soon as the power head is removed the power shuts off. I tried pressing the reset button but that doesn't help. Is there a solution that I can try at home?

Sound like you problem is in the connection going to the power head you will see a small screw on the power nozzel where it joins to the handle take out the screw and take it a part you will see where one of the bars have been disconnect from the pow ... Electrolux Guardian Bagged Canister Vacuum

I have a Kenmore Elegance Vacuum with Dirt Sensor, Model # 116.30750400C, Serial number M41901532. When vacuuming the carpet the power head will work for 3-6 mins then automatically shut off, power is still there and lights work but the power head motor turns off and the suction stops. I will turn it off and on, check the outlet, flick the on off buttons...nothing. I will turn it off for a couple minutes and it turns back on and runs like normal. I've check the bags, filters, cleaned the hos

It is an electrical problem in the handle, if you can or know somebody that has any fix it ability it can be fixed in about ten minutes. Oh, and Sears SUCKS!! ... Kenmore 34612 Bagged Upright Vacuum

I have a tank style vacuum. When I vacuum with the power head it dims and slows down when I push the power head back and forth, but it powers back up louder when I stop pushing it If i remove the powerhead from the hose the vacuum works fine.

Most likely the belt. Thats the cheapest so try it first ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

No spinning in the power head

First, check the red reset button on the power nozzle head. - if it's popped out, push it in. Also, if you have a switch on the handle, make sure you're pressing it while you're vacuuming. if those obvious solutions are already remedied, you may ne ... Rainbow E series Canister Wet/Dry Vacuum

Eletrolux power head

Usually you will find a brush assembly which includes the bearings. You could also be hearing the belt jumping across the brush gear if the belt is bad. If you order the parts online, you may want to get a brush and belt, since a belt won't be that m ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Power head has power but motor won't run

Circuit brealer switch may be bad, but the fact that Rainbow nozzle made this strange sound makes me think that it may have ha ... Rainbow E series Canister Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0696 seconds