Having problems with your Rainbow E series Canister Wet/Dry Vacuum ?

Rainbow E Series Power Nozzle I'm not sure which part of it is not working?

\015 A week a go I wanted to vacuum when I turned it on, after a while i got this strong smell of rubber burning so I turned it off right away. When I opened the nozzle i realized it was the belt. I bought the belt online and when it came I tried working it, but than realized that the nozzle brush got burned....I am not sure now, it it the motor that is causing all this trouble or was it because the of the belt and the nozzle brush, I have had the vacuum for a while and love it. I miss my clean floors!\015

Answers :

<p>The power nozzle brush roll bearings could be locking up from hair and debris wrapped around them. If that is the case, then the brush roll will be hard to turn and will cause the belt to heat up and give a burning smell. If you need to speak to a Rainbow Specialist, give us a call.</p>
<p>RainVac </p>
<p><a rel='nofollow' href="www.rainvac.com">www.rainvac.com</a></p>
<p>800-523-0510</p>
Repair Help & Product Troubleshooting for Rainbow E series Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Rainbow E Series Power Nozzle I'm not sure which part of it is not working?


<p>The power nozzle brush roll bearings could be locking up from hair and debris wrapped around them. If that is the case, then the brush roll will be hard to turn and will cause the belt to heat up and give a burning smell. If you need to spea ... Rainbow E series Canister Wet/Dry Vacuum

I need a new power cord for the power nozzle on my Electrolux 2100 canister vacuum. The power nozzle has part number N115M written on the bottom. I have found the power cord for power nozzles PN6 and PN7 online, and it looks identical in photos but I'm not sure if it's the right part.


You can buy the hose at an authorized Aerus Electrolux store. If near enough, they will deliver, if too far, they can ship it. The nearest dealer can be found using the below link. Just follow the instructions.\015\012Just provide the model ... Electrolux UltraLux 2000 Bagged Canister Vacuum

Power nozzle of my S3670 does not work (vacuum itself does work), the headlight bulb in the nozzle is broken. This happened in the past several times - we would bring the vacuum to service center - I don't know what they did other than replacing the bulb. I decided to go to ACE and buy replacement bulb myself, replaced the one in the nozzle - this did not fix the problem. I don't see any fuzes or anything in the nozzle. However, the manuals says to "Use only HOOVER part no. 27317307, which is a


... Hoover S3670 Bagged Canister Vacuum

Electrolux Epic 6500 SR ...no power to power nozzle. I think it is the switch in the handle because if I use my friend's hose/handle (same model), my power nozzle works fine when I turn on the switch. If you think it is the switch, can I get a part for it?


That's about the best one to narrow down a problem, however, there could also be a break in your hose wiring. Switches, hoses, and hose handle assemblies are all available at your local Aerus Electrolux store. Simply take your entire machine in so ... Vacuums

Power nozzle for rainbow vaccum is getting power but the motor does not work nozzle model r-2800c


Hi there it's SmartAlec from NelsonVacuums.com.au here. It will either be the fuse or the motor itself. If you disconnect the wires from the fuse and join them together and ... Vacuums

Rainbow vacuum wet, power nozzle isn't working now was and just stopped


Does your version have a light on the power nozzle and if so, does it come on?RainVacwww.rainvac.com800-523-0510 ... Rainbow E series Canister Wet/Dry Vacuum

My Rainbow E Series poweres on but after a while that it is working it sounds like it wants to power off, the motor seems to loose speed and then it continues.


If you have used it alot, then the brushes are PROBABLY worn and failing. You should take it to have this checked as it will wreck the commutator to run that way requiring whole motor to be replaced. Take it to a repair facility. ... Rainbow E series Canister Wet/Dry Vacuum

Rainbow vacuum power nozzle not working - Rainbow 75th Anniversary Canister Vacuum


... Rainbow 75th Anniversary Canister Vacuum

Rainbow e series smells burnt when power nozzle in use


Replace the belt in the power nozzle, it has to be changed yearly. ... Rainbow E series Canister Wet/Dry Vacuum

My Rainbow E series power switch doesn't work


My rainbow e series has suckion but does not pick up dog hair ... Rainbow E series Canister Wet/Dry Vacuum

Power head not working - Rainbow E series Canister Wet/Dry Vacuum


Check connection from hose to the main unit. Very important to make sure that the hose has a solid connection to the front of the machine. If not, then the receptacles can't make good contact to allow the power nozzle to turn on.RainVac ... Rainbow E series Canister Wet/Dry Vacuum

Power head not working. - Rainbow E series Canister Wet/Dry Vacuum


Need more information. If your version has a red light, check to see if it comes on. If it does, then your circuit breaker is bad. If it does not, then you have an electrical problem most likely with the hose. Let us know.RainVac ... Rainbow E series Canister Wet/Dry Vacuum

How to replace the motor in rainbow e series power nozzle


... Rainbow E series Canister Wet/Dry Vacuum

Rainbow Vacuum, about 5 yrs old (bought new, no issues prior) - my 6yr old tipped it on it's side while water was in basin. Now when I turn the power on, it makes a very loud sound in the motor and you can feel the vibration on the floor. The suction still works and basin still catches dirt - the noise is just so loud and I'm not sure if I should continue use or how to fix -?


Although a wet/dry vacuum, it cannot tolerate water in the motor. Water will cause the motor to short out, which will cause the motor to act/sound like yours does now, if it continues working at all.\015\012To prevent additional problems, the ... Rainbow E series Canister Wet/Dry Vacuum

My power nozzle has stopped working. The vacuum itself is still working but not the power bar. I would like to order a power nozzle. Can you tell me how I can order a nozzle for a Kenmore Whisper Belt 12.0 amps


... Kenmore 23313 Whispertone Bagged Canister Vacuum

Power nozzle on E2 series fell apart


... Rainbow E series Canister Wet/Dry Vacuum

I was vacuuming with the regular nozzle and all was well. Then I changed to the powered nozzle and the 2nd power level wouldn't work and then when I detached the powered nozzle I was unable to turn it ....there was no suction. The lights are on for low and high level but not middle level power.


... Hoover S3765-040 WindTunnel Bagless Canister Vacuum

Replace on/off switch on rainbow D3 vacuum - Rainbow D3 Canister Vacuum Cleaner Power Nozzle Reset Switch Vac Cleaner Power Nozzle Reset Switch


... Rainbow D3 Canister Vacuum Cleaner Power Nozzle Reset Switch Vac Cleaner Power Nozzle Reset Switch

My Electrolux central vacuum power nozzzle was working hit/miss and now has stopped working. The metal connectors in the wand and power nozzle get very hot, enough to burn. The metal connectors also


... Electrolux Central Vacuum

Rainbow e series vacuum on/off swicht not working


It is possible that the motor is throwing the circuit breaker. It is self resetting so your unit should turn back on after an hour. If it does not, please give us a call at 800-523-0510...www.rainvac.comService Specialist ... Rainbow E series Canister Wet/Dry Vacuum

Was using my Miele Champagne vacuum, powered down, changed the bag, and now I have no power. I checked to make sure all lids were securely closed, still no power. Checked to make sure outlet was working, still no power...help.


Most likely the cord went bad, one side of it opened up, you will have to replace the cord reel asm. if this is the problem, Could also be a switch, electronic control or the motor. ... Miele Vacuums

Power nozzle on E-series won't start when cold unless the red 'reset' button is pressed multiple times while also holding the trigger to 'warm it up'...this is w/the power nozzle off the floor - no restriction on it turning. Once it's been running and then turned off the button must be pressed w/the trigger to get it to run - again w/the nozzle off the floor. It also seems to shut off too easily while vacuuming. I replaced the motor,which didn't fix it. Is the reset switch next on my list? T


... Rainbow E series Canister Wet/Dry Vacuum

Rainbow SE power nozzle


If the brush is spinning ok, and the belt isn't slipping, then probably the circuit breaker is bad, or the motor is causing the problem. ... Rainbow 75th Anniversary Canister Vacuum

Electrolux power nozzle not working


FIRST OFF EACH OF YOU HAS A COMPLETELY DIFFERENT MACHINE. ESPECIALLY THE OXYGEN WHICH IS MADE BY THE "NEW" ELECTROLUX. THE OTHER TWO ARE MADE BY THE "OLD" ELECTROLUX WHICH IN NOW CALLED AERUS. THE ADVICE WITH TH ... Electrolux Guardian Bagged Canister Vacuum

Power nozzle not working on my vac but does on another vac


If pushing the reset button doesn't help try having your local Aerus dealer check out the 2 prongs in the power head where it all connects. Sometimes they go bad. ... Electrolux UltraLux 2000 Bagged Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0753 seconds