Having problems with your Rainbow Technologies D4 Bagless Vacuum ?

I need a wiring diagram for a rainbow d4c

\015 I am changing the old style push wires to the new 4 wire system with 2 black and 2 blue wires.thanx for any help.\015

Answers :

Are you talking about the power switch. The new power switches have 4 wires sautered to the power switch, where the old ones have 6 wires that slip in and lock into the power switch.
\015\012
\015\012The blue ones are for your power cord, and the black ones are for your vacuum motor, and your power nozzle plug.
\015\012
\015\012Secure one motor wire and one power nozzle plug wire to one of the black wires out of the new switch, and secure the other two, to the other black one from the power switch. It does not matter which ones that you match together. Secure one of each of the power cord to the two blue wires from the power switch. It does not matter which one of them goes to each wire neither. It is AC so power goes both ways.
\015\012
\015\012Use twist on wire nuts to secure the wires to each other, and put some electrical tape around each of them, after you secure them securly with the wire nuts.
\015\012
\015\012It is best to secure the cluster of wires to each other with a pull tie, after you are finished wiring everything.

If you have any more questions let me know. I am a Rainbow seller, and a Rainbow expert also.

Thank you,
Ralph
How do I replace the on/off switch on a Rainbow, model
\015\012d4c vacuum?
Repair Help & Product Troubleshooting for Rainbow Technologies D4 Bagless Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need a wiring diagram for a rainbow d4c


Are you talking about the power switch. The new power switches have 4 wires sautered to the power switch, where the old ones have 6 wires that slip in and lock into the power switch.\015\012\015\012The blue ones are for your power cord, a ... Rainbow Technologies D4 Bagless Vacuum

Need wiring diagram for Rainbow D4C vacuum to install rocker switch


You can get a wiring diagram at http://www.rainvac.com/schematic.html\015\012\015\012You can get all of the manuals, and the full breakdown schematics, of ... Rainbow Technologies D4 Bagless Vacuum

Hello! I have a Rainbow vacuum Model# D4C that needs a switch. I am only able to get the new style 4 wire switch and it has the 6 wire. Can I make the 4 wire switch work in place of the 6 wire?


... Vacuums

Need to replace a switch on a d4c rainbow vacumn


... Rainbow Vacuums

Rainbow mod. D4C have new on /off switch, 2 black, 2 blue wires. need to connect power cord, motor and carpet sweeper?


Are the wires still attached to the old switch? If they are, hook them up to the new switch in the same, physical way. If they aren't attached, you might take it into a vacuum repair shop- they could probably help you figure it out, if you bought ... Rainbow Technologies D4 Bagless Vacuum

I have the new power on/off switch to replace the old one(Rainbow vacuum). However the new switch has 4 contacts & the old one has 6. Need wiring diagram.


Simply pair 1 each of the power head leads and motor leads on to one terminal and wire the cord as on previous switch. ... Rainbow E series Canister Wet/Dry Vacuum

Wiring diagram Need wiring diagram for the motor wiring.


\015\012\015\012HI, tell me is this you want,, \015\012\015\012Gunjan:-) ... Vacuums

I have a d4c rainbow vacuum, need help replacing the electrical cord


You have to splice them. \015\012Use crimp-on wire connectors (best), or threaded twist-on wire connectors. Do NOT just twist wire strands together and tape wires without using wire connectors . . . that is a NO-NO. ... Rainbow 75th Anniversary Canister Vacuum

I took my durabrand toaster oven model t0-80 apart and i need the wire diagram to put wires back on it cause it needed cleaning.


... Vacuums

Titan therm o dial T770 wiring diagram space heater I need wiring diagram to make repairs


... Vacuums

Need a wiring diagram for a karcher puzi 100 yellow. Mainly need to know which way round the wires go on the switches?


... Vacuums

Need proper wiring connections inside unit, where they have pulled apart from squeeze connectors.(Wiring diagram needed) Can someone E-Mail this to me? Fritz (an ''old'' mechanic) Folks I have talked to, say there is no specific model number for these units. They are just described by name, and serial #. and I have relayed exactly what was labled on the unit. Please post this and quit asking me to enter a "valid" product.


Fritz , thanks please confirm... there are likely more than 2 leads from the motor?? I have not seen or worked on the Tristar CXL as it is very new.You will have a high low function but: Should the power head function at both spee ... Vacuums

Rowenta Effective Steam Iron DX1700 Need wiring diagram. How do I wire the power cord to the internal Red, Blue, and White wires? What wires are neutral and which are hot?


... Vacuums

I need a diagram of the trigger wiring in my bissell proheat 8930


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Vacuum won't switch on;got it apart;cord ok;need wiring diagram


Its a great idea to write on paper how its connected . So it helps with dis assembly & reassembly . I tried a Internet search . Looks like it'd cost money for a service manual. Though. I found a Kirby Spares Website that could help. Although it d ... Kirby Generation 3 Bagged Upright Vacuum

I need the wiring diagram for a Mighty Pro x3 Wide Track carpet cleaniung machine


... Vacuums

I need the wiring diagram for the motor.


... Hoover Commercial Windtunnel C1705-900 Bagged Upright Vacuum

I need a wiring diagram for a RayGo Rascal 320A Self Propelled Vibrating Roller!


... Vacuums

Need wiring diagram for on/off handle switch


... Kenmore 25512/ 25513 Progressive Canister Vacuum

Replacing the Oreck vacuum cleaner motor with a generic Ametek motor, the wiring terminal are different and I need an electric diagram


... Vacuums

NEED WIRING DIAGRAM


... Oreck Vacuums

Heritage 2 - black wire pulled out from motor assembly, comes from power switch. Where does it go? Need wiring pictorial and schematic/wiring diagram. Can anyone please help? Many thanks, Malcolm


... Kirby Heritage II Vacuum

I need a wiring diagram for an Oreck XL2600 motor. There are 5 wires- 2 from the cord and 3 from the light


Hi Gregory,You can get wiring instructions from the Oreck factory. They'll need both your model number and serial number. Here is the number to call: 1-800-989-3535 and here is their website: 1-800-98 ... Vacuums

Lindhaus 031207 blue wire from motor pulled out from terminal block - need wiring diagram to tell where it goes back into the terminal block


I am sorry that this happened. It appears the unit is proprietary and you can download most of the information that you seek from:\015\012http://www.lindhaususa.com/support. ... Lindhaus HEPA 14 HealthCare Pro Bagged Upright Vacuum

Hi, my circuit board resistors are burnt due to my re-wiring the resistor switch. How do I fix this - S3755 wiring diagram?? need to know the correct resistors or get a new board


The only way is to get a replacement board. even the dealers are not provided with that level of wiring diagrams. ... Hoover S3755 WindTunnel Bagless Canister Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0641 seconds