Having problems with your Roomba Robotic Floor Bagless Vacuum ?

Repairing stuck wheel/Roomba Discovery

\015 My Rooma Discovery 4210 has one slow-moving wheel--one of the two spins just find, the other slowly. I can't find an obstruction, but I can't see what might be lurking between the wheel and the black plastic that covers it, either. I called and Roomba told me the wheels of the Discovery models can't be fixed and suggested I buy a new Rooma 500-series, which has fixable wheels. They didn't recommend trying to repair the wheel. Well. Thanks, Roomba. Given that this machine is otherwise useless, any suggestions on how to get that wheel unstuck?\015

Answers :

Just learning, but sounds like the one that doesn't spin freely is the good one.
\015\012The other may have a broken belt.
Repair Help & Product Troubleshooting for Roomba Robotic Floor Bagless Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Repairing stuck wheel/Roomba Discovery

Just learning, but sounds like the one that doesn't spin freely is the good one.\015\012\015\012The other may have a broken belt.\015\012\015\012 ... Roomba Robotic Floor Bagless Vacuum

We have a Singer 626 sewing machine. It's an old mechanical machine with heavy metal parts. The stitch selector was stuck, I removed the top and helped the selector to move. when I had to move the selector again, it was stuck and I pushed too hard and broke a component. I can fix the machine if I had a repair manual. I need to buy a repair manual. How and where can I get one? Thankjs Charlie PS. Im pretty mechanicly inclined and I was able to clean the machine and get it to work after

... Vacuums

Roomba Discovery Roomba is fully charged and cleaned with sensor wiped clean. When turned on it it sounds normal and commences to go, but it then acts like it is putting on the breaks, spins, tries to go and manages a short distance and breaks again, just not making any progress because it keeps breaking after a foot or so and turns and tries again. Sometimes is gets so stuck from moving forward at all, like it is stuck in one spot just trying to go while seemingly surrounded by barriers. Somet

I had the same back-up, turn, move forward a couple inches, backup-up, etc. problem. Try cleaning/cutting the hair, etc. out from around the brushes, as well as around the ends of the brushes. Also, try a Q-tip to clean out the four pair of sensors ... Roomba Robotic Floor Bagless Vacuum

The vacuum is making a noise like something is stuck when it is in the carpet position but not when in the floor position. I can't find anything that is stuck in the areas that I can see. I have cleaned the brush but it does not seem to want to turn. Does this machine need to be oiled so the roller will turn? Is there a way to check inside the motor? Do you think that because the brush won't turn that is making the noise? Do you know of any repair shops in the Lake Havasu City, Arizona area?

As far as the roller brush goes, yes, it does need to be cleaned. Follow the directions to remove it and clean as best you can of all debris. On both ends of the roller brush there will be two "holders" of sort that connect the brush to the frame o ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Roomba Discovery My Roomba turns on and moves but the brushes won't turn. Someone told me that I had forgotten to put in the yellow and black end bearings, but I did. Help, I miss my Roomba I have a Roomba 530, I have had it for 2 weeks and really loved it. I have followed all the cleaning instructions etc.. Then the Roomba wanted it's brushes cleaning "please clean Roombas brushes" So thinking that something was stuck I removed and cleaned the brushes, (yellow tabs on and in place by the way)

I read somewhere that you need to clear the software in case there is a glitch. To do this, take the battery out and then, simultaneously hold down the "spot" and "clean" buttons for 30 seconds. Replace battery. This has worked for my Discovery model ... Roomba Robotic Floor Bagless Vacuum

Smoke/motor? When turned on, smoke comes out of bottom. Roller not stuck. Looking for repair estimate in Henderson, NV. area.

I don't know in Nev. call Hoover's 800 number and they will tell you, the number is on the metal tag. But if it is the motor smoking, a motor will run you $85 to $95, plus labor, $40 to $50. But if this an electrical smell, then suspect the motor. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum

My Hoover Pet Cyclonic power cord is stuck. No going in or out. How do i access this area so i can repair it?

... Dirt Devil Hoover Uh70085 Pet Cyclonic? Upright Vacuum

I have an electrolux central vacuum in my house. My central vac hose has something stuck in it, I think, maybe a sock. I tried to put a long dryer wand down it but the hose is just too long. Does this need a repair man or new hose?? Any idea of a way to blow it out? Thanks.

The best way to clear an obstruction is to blow it out by attaching the wall end to the exhaust of a shop vacuum, or using an air compressor.\015\012You can try holding the wand end of the hose directly to the CV in port and turning the machine ... Electrolux Central Vacuum

I have a Simac Stirella No Problem steam generator iron Model no. SX8040D.I cannot control the steam generated.The button is stuck and so the steam is continuous and I am using a lot of distilled water.I have to keep on filling the tank very often I would like to send it for repairs but I do not have a contact number or address. Mohan [email protected]

... Vacuums

Roomba wheel -- stuck

I had a similar problem, I just took my Roomba Red apart and put it back together about four times before I fixed it.  In my case it turned out to be a dirty sensor, fixed as described at\015\012\015\012http://mysteryroad.blogs.com/photos/ ... Roomba Robotic Floor Bagless Vacuum

Repair maunal and/or Experianced person needed

... Hoover Ultra U6430-900 WindTunnel Bagged Upright Vacuum

Hoover rewind cord stuck

... Hoover WindTunnel Pet Rewind Upright Vacuum

Repair I live in Lumberton, N.C. and purchased an Electrolux Oxygen at the local Lowe's which I have been unable to find anyone to repair because theyinsist they cannot get the parts. When I called Lowe's where I boughtit they said they cannot return it for repair. What do I do ? I think it needs only a [email protected]

In your owner manual there should be a number you can call for service. If less then a year old, then it is under warranty. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I have an Electrolux Oxygen 3 vacuum I purchased rebuilt. After 1 month the power stopped working. I took it into Electrolux Authorized repair dealer, which was a horrible experience. When we received it back it was clearly not as powerful as before. Does anyone have any suggestions on what the problem may be? I would rather fix it myself than take it back to them. The next repair center is too far away. I am pretty good with fixing things, just needs some guidance. I think the repair center rep

Never have liked Electrolux doing any repair because it has been my experience that they don't do what they say they did....if you can read between the lines.....give me a picture of the unit and more details and I'll try and help you. ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Oil leaks from my Cuisinart (past warranty) stand mixer SM-55 accessory power port. Can oil be added? Is there a repair part? Cuisinart customer service says that only Cuisinart repair service is capable of repairing the mixer.

Hi,Cuisinart are over packed with oil\015\012 If the motor sits idle, the oil may begin \015\012to drip from the gears and settle. Oil leakage may primarily be seen \015\012from around the beater shaft or p ... Vacuums

Repair Service I have a Miele White Pearl. I have a short in the head part of the vacuum ad need repair. Do you know a repair shop near Ely, Minnesota?

Maybe this link will help\015\012http://www.miele.com/locator.asp?nav=7 ... Miele Red Star Bagged Canister Vacuum

Hi all---I have a Dirt Devil 091020V. there was a problem with the wand where it was the only thing sucking even when it was stuck in the tube it would ****--but nothing from the vacuum end--the diverter was stuck closed I took it apart and found something stuck but in the meantime the torsion spring [I think} fell out and I don't know where it goes--so now only the vacuum works --not the overhead cleaner part.. is there a digram somewhere that can tell me where it goes--I think it might b

... Vacuums

Hello, I have an Electrolux vacuum. In desperation, I vacuumed up some water and my machine stopped. I am hesitant to take the machine to a repair place for fear that if it is a simple repair they will not be honest. Can anyone give me advice on whether this is a problem that requires a new motor or major repair? Thank you!

Although it's never to be recommended, it is sometimes possible to vacuum up a little water without doing significant damage. However, the fact that your machine then stopped suggests that the electrics got wet. That may or may not have caused expens ... Vacuums

VACUUM REPAIR I have a Hoover Savvy upright, windtunnel, bag/bagless vacuum (model U8150-900). The Handle Release Foot Pedal - Part #38434026 broke soon after purchase but I finally found a source to replace this item. The problem is that now that I have the repair part I cannot figure out how to remove the old pedal and install the new one. The housing appears to be one piece of solid plastic. Any ideas, PLEASE! Peter

There are 2 tabs that stick out on the release, they fit in slots, so from the top look down and you can see them, using a flatblade screwdriver that will fit in there, push the side in to release it, which isn't easy, but it can be done. When you g ... Vacuums

I have an endurotronic 4111 electrolux vacuum called ''the boss'' and the cable wont retract into the vacuum when i depress the button on the top. how do i dismantle parts to have a look to see if it will repair or not. does anyone have a repair manual for this vacuum. thx

... Electrolux Vacuums

The small belt that makes the beater bars spin broke. It is only two years old; repair shops tell me this involves replacing two belts because of some kind of clutch to the tune of $150! Is this possible to repair myself

A very easy replacement. The belts cost about £3 each. Yes, there are two belts and even if the clutch needed replacement, this is about £20 for clutch and both belts http://www.dysonpartsdirect.co.uk/dysonparts/dc07belts.shtml - this is ... Dyson DC07 Bagless Upright Cyclonic Vacuum

Handle stuck handle won't go down. button stuck

... Hoover U5180-900 Vacuum

Need repairs need a dealer in the area for repairs.. minnesota 55447

This is the list of the dealers i could find.Please do rate my solution if accepted.\015\012\015\012\015\012\015\012CREATIVE SEWING CENTERS\015\012\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\011\015\012\011 ... Royal 4000 Classic Bagged Upright Vacuum

I have a 3 or 4 year old Hoover steam carpet cleaner: model # F 5857-900  It stopped working and does not vacuum up liquids or dispense liquids for the water container. Where can I take it for repair? I live in Colchester,CT 06415. Also,is there any written repair manual that my husband might be able to use?

... Vacuums

My Kenmore Progressive vacumn motor turns off and on while vacumning. I don't know if I should take it for repair, purchase a new one or find someone who can do easy repairs (family member).

Turn on the vacuum but don't move it--just start at the plug end of the cord, bend and pull gently on the cord, but hold the plug in the socket. Work along the cord while listening to the motor for cutoff. When you get to the internal break in the co ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0309 seconds