Having problems with your Roomba Robotic Floor Bagless Vacuum ?

Roomba's deck height adjustment string broke

\015 Is there any way this can be repaired? It is still attached on the body of the Roomba, but where it goes in the groove on the deck, that is where it is frayed. Is there any hope?\015

Answers :

You can solve this problem if you are on the handy side. I had the same problem and fixed it, allowing Roomba to live until getting an all-too-characteristic fatal brain problem later.
\015\012
\015\012You have to open up Roomba and guage the original length of its string. You'll need to make a replacement and cut the first one off. The shaft around which the original rolled to adjust the height is where you must affix the new one. It's a bit tough and you have to be creative (like screwing the string into the chassis with your own screw after drilling a pilot hole) but if you get the length of string right it will wind and unwind just like the original.
\015\012
\015\012I wish I could be a bit more specific but it's been a long time since I pulled this fix. If you're not a tinkerer, don't try it because it is a bit difficult. Best of luck.
Repair Help & Product Troubleshooting for Roomba Robotic Floor Bagless Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Roomba's deck height adjustment string broke


You can solve this problem if you are on the handy side. I had the same problem and fixed it, allowing Roomba to live until getting an all-too-characteristic fatal brain problem later.\015\012\015\012You have to open up Roomba and guage t ... Roomba Robotic Floor Bagless Vacuum

How do I install height adjust cable on roomba 415?


... iRobot 4150 Roomba Vacuum

My hoover hurricane height adjust handle broke off I have all the pieces but no idea where they go x


Try these web sites:http://www.howtomendit.com/search.php?keywords=Hoover&cat=&page=1http://search.aol.com/aol/search?&s_qt=sb&q=hoover+hurricane+repair+information&tb_oid=07-01-2013&s_it=amonetizetest1-ie& ... Vacuums

I have a Miele S1721 Powerhouse upright vacuum. When the belt broke I took it into the shop (because when i tried to replace the belt, the tension was so tight I couldn't get it back together!!). When I got it home I DISCOVERED THAT THE HEIGHT ADJUSTMENT DIDN'T WORK anymore. It seems like it's set really hight, because it no longer contacts and brushes the carpet. So it's now useless. I went back to the shop and the tech denied that there was anything wrong. (I didn't have the vac with me). No


Hi\015\012The Miele uprights (S170 and upwards) with the Powerhouse title are ALL Panasonic uprights which have been at one time sold in the UK. Therefore the upright may use TWO drive belts which need to be looked at: Take off the sole plate a ... Vacuums

HANDLE height adjustment just broke and I can not find any place that sells it. Any suggestions would be of great help. Thanks, Mafiabella


It i called a detent lever, part # 2030052. Usually a repair shop can order this for you. Or you might try bissell.com and see if you buy it online from them. ... Bissell 6590 CleanView Bagless Upright Vacuum

Height adjustment The height adjustment button on my upright is nonfunctional.  The Height is set closest to the floor and it makes it difficult to move on medium height carpet.


You'll have to turn the upright to its side to show the sole plate where the rolling brush is. Check where the front wheels are located and ensure there is no blockage obstructing the rotary dial. Sometimes the spring mechanisms can work themselves l ... Electrolux Oxygen 3 Upright Vacuum Cleaner - EL5035 Vacuum

Kenmore Powermate foot pedal doesn't adjust the height anymore


... Kenmore 23612 Progressive PowerMate Bagged Canister Vacuum

I have a Dirt Devil M088400 - Vision Turbo Vacuum. A spring fell from the bottom and the carpet height adjust isn't working. The rollers under the unit won't stay in place either. Can you tell me how to put the carpet height adjust back together?


The roller attaches to wheels. There is a spring that attaches from roller to hight adjustment selector which is a plastic peice with a little hook on bottom that spring attaches to. Both peices should have a hook that the spring ttaches to. ... Dirt Devil Vacuums

Height adjust how to repair the height adjust


... iRobot Roomba 415 Bagless Vacuum

We have the 3910T model. I am trying to get the height adjustment to work. I had taken apart the portion to change the belt and for some reason the height adjustment is not working. Is there a diagram on how to have the knob engage the other part?


... Bissell 3910 Bagless Upright Cyclonic Vacuum

Height adjustment not adjusting


The height adjustment wont engage unless the handle is in the down position. Not knowing this led me to overturn the hight adjustment knob.\015\012\015\012Step on the handle release, pull the handle back and lay the vac on its side. The ... Bissell 3920 Bagless Upright Vacuum

Bissell 6590 handle height adjustment


The handle adjustment knob part # is 2031095, the height adjustment wheel asm. part # is 2031330. You might try bissell.com and see if you can order direct from them. If not, most repair shops should be able to order for you. ... Bissell 6590 CleanView Bagless Upright Vacuum

Carpet height adjustment not changing the height of the brush.


... Eureka Smartvac 4870 Bagged Upright Vacuum

I can see the height adjuster under my Bissell pet hair eraser vacuum, but it doesn't adjust. The parts don't look like they're touching. It's been iffy since I took it out of the box. Now it doesn't adjust at all. Used only five times. Looks like I should be able to fix it myself. No local repair available. Could you help please?


Http://uk.bissell.com/images/UserGuides/3920E_508.pdf\015\012\015\012This is the pdf manual. If you look at page 12 you'll see that the bo ... Bissell Vacuums

My telescopic wand height adjustment won't lock the height in place. The wand extends to full height with no locking in place. How do I fix it?


These wands have a very small nub that locks them into place. They wear out very easily. You might have to replace the wand. ... Euro-Pro NV31 Infinity Vacuum

Height Adjustment on Hoover Wind Tunnel doesn't seem to do the job.


... Vacuums

Replacing the height adjustment on bissell cleanview model 3576


... Bissell 3576 CleanView II Bagless Upright Vacuum

Sebo x1 auto height adjustment stays high


... Sebo Automatic X1 Bagged Upright Vacuum

Re-attaching spring for wheel height adjustment


... Eureka Altima Upright Vacuum Model 2996AVS Vacuum

Sanitaire commercial vacuum On some carpets, we can't get the correct height adjustment. It's either too low, so the beaters stall and don't spin, or so high that it fails to pick up animal hair. I'm not sure if something is malfunctioning or if I need to have a better understanding of how to adjust


... Electrolux Eureka SC689 Sanitaire Commercial Lightweight Bagless Upright Vacuum 14lbs

The height adjustment isn't working...it isn't changing the height at all...how can I fix this?


... Dirt Devil M086700 Vision Bagless Upright Vacuum

I have the Dyson DC14 and its like it's not brushing the carpet anymore, The brush is spinning, but its like it isn't self adjusting to the carpet height? It still has suction, but doesn't make the same sound it used to when you'd start vacuuming. Its like it never adjusts anymore???


Hi its Darran at Dyson.It sounds as though the internal hose underneath the machine has twisted slightly. With the machine switched off, lay it on its side and look at the base. You should be able to see a small corrigated hose. Simply t ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

The height adjustment on my Bissell 6594-W no longer works, I took it apart and reassembled but still doesn't change the height. Should there be a spring in there? Is there a site with directions on how to fix it? Thank you.


... Bissell 6594 PowerForce Bagless Upright Vacuum

Height adjustment knob wont adjust anymore, its loose. was turned too hard.


Try this link http://www.vacsite.com/en/bissell-parts-1/bissell-parts/6594-powerforce-bagless.html ... Bissell 6594 PowerForce Bagless Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0221 seconds