Having problems with your Sebo Vacuums ?

Sebo canister vacuum powerhead keeps stalling

\015 My sebo canister vacuum works well with all attachments except for powerhead. When powerhead is attached, it is sluggish and acts like it is stalling when I pull back on it...when pushing forward, it gets power back.\015

Answers :

Repair Help & Product Troubleshooting for Sebo Vacuums

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sebo canister vacuum powerhead keeps stalling

... Sebo Vacuums

Machine keeps cutting out intermittenly - Sebo Air Belt C2.1 Bagged Canister Vacuum

My Sebo Air Belt C2 Total. The automatic electric cable wire won't stay out when pulled, it just springs back. When I'm hoovering I have to wrap the wire around the small wheels so that it doesn't shoot back in the machine. ... Sebo Air Belt C2.1 Bagged Canister Vacuum

Hoover Uh30010com the hose on the canister does not stay lock (it keeps poping out). I heard great reviews on this vacuum but I am so dispointed with the canister I am ready to return it to the store, I think it is a waste of money if you can't use the canister... I cannot believe I did not find reviews on the canister.

You can take it back. they will return it they know this happens all the time. If you like canistar vacs you should get a tristar. they are the best! call me for more info 866-635-9254 John ... Hoover Vacuums

My kenmore progressive canister vacuum powerhead wont stay on

... Kenmore 25512/ 25513 Progressive Canister Vacuum

My beater bar on my Kenmore 116.25615506 canister vacuum keeps turning on and off when I vacuum rugs. The suction continues, but the beater bar seems to be shorting or whatever. I checked the belts and they look like new. Any suggestions? The rest of the vacuum works fine!

... Kenmore 25512/ 25513 Progressive Canister Vacuum

Vacuum keeps saying bag is full and cuts 0ff - Electrolux Harmony Canister Vacuum - EL6985 Vacuum

... Electrolux Harmony Canister Vacuum - EL6985 Vacuum

How to maintain up keep on my rainbow vacuum - Rainbow E series Canister Wet/Dry Vacuum

Keep the bottom clean, make sure the rubber seal in the bottom doesn't start to crack and every 10 years or so replace the brushes.\015\012\015\012I wrote a tutorial on how to take apart an E-Series rainbow. \015\012\015\012 ... Rainbow E series Canister Wet/Dry Vacuum

Dyson dc20 powerhead intermittent rotation - Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

I have a new electrolux el7025a-r and it keeps cutting off while I am vacuuming. I am using the small powerhead on hard floors and I have checked the hoses for blockages and the bag is new. I can not figure out why it keeps turning off in the middle of a job.

The wands are notorious for going out on that unit. One or both probably need to be replaced. Try to get it done under warranty if you still have the receipt, but they shouldn't cost you too much if you can't. \015\012\015\01 ... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum

Replace belt on powerhead of electrolux 9000 - Electrolux Compact Canister Vacuum Powerhead Belt

... Electrolux Compact Canister Vacuum Powerhead Belt

Electrolux Diplomat canister vacuum. The bag light comes on and it stops. It has to do with the hose because if I take the hose off, then the vacuum keeps running. I can't see anything blocking the connection. any suggestions on what else to look at?

... Electrolux Vacuums

Cord reel for sebo airbelt d - Sebo Air Belt K2 Bagged Canister Vacuum

... Sebo Air Belt K2 Bagged Canister Vacuum

I have the electrolux oxygen canister vacuum and the light keeps flashing on and off and the vacuum does not sound right what could the problem be

... Electrolux Oxygen 3 Upright Vacuum Cleaner - EL5035 Vacuum

Taking off the bumper from A Sebo K1 Airbelt - Sebo K1 airbelt Bagged Canister Vacuum

First, remove the clip at the back of the machine where the airbelt joins (lever it off carefully with a screwdriver). The airbelt is in two parts - the bulky foam strip and a thin material cover. The cover is held in grooves, top and botto ... Sebo K1 airbelt Bagged Canister Vacuum

Power Head keeps cutting in and out while vacuuming???Canister motor keeps running but the power head starts and stops like there is a short or some loss of connection somewhere. Any ideas?

My kenmore progressive vacuum had the same problem. The electrical terminal at the bottom of the wand was corroded. I used a flat head screw driver to scrape the female portion of the connector as best as I could. I then took off the plastic cover on ... Kenmore 23913 Progressive PowerMate Bagged Canister Vacuum

My Kenmore Tru Hepa Canister vacuum won't start... the Powerhead turns on but not the canister. Help Please!

... Kenmore 25512/ 25513 Progressive Canister Vacuum

Powerhead woes Drive belt for power head beater brush on Hoover S3755 keeps jumping off drive motor shaft when vacuuming low pile carpets like oriental rugs unless minimal suction is used. Any tricks to keeping the belt in place other than this?

I've had my Hoover S3755 for about 2 years and loved it, at least until the last couple of months when the "belt slipping off" problem started. I changed the belt and the vacuum would work for a little while then the belt would come off again. I pu ... Hoover S3755 WindTunnel Bagless Canister Vacuum

Hi, I have a Kenmore Whispertone canister vacuum that I purchased in 2007. The model # is 116.22271503C, which seems to confuse the parts people. I need to buy a new powerhead & a few months ago was given a price of $75, but now Sears Canada tells me the part # is 20 116KC5OXBZRZUO1 described as Power Mate Assembly for $192.99. I thought the Power Mate was the small powerhead for stairs, upholstery, etc. Have they located the wrong part for me, or is this really what it costs?? Thanks in advance

Yes, powerheads are quite expensive. That sounds about right.\015\012You can check Ebay for better prices, but check the shipping rates before ordering. ... Kenmore Whispertone 23312 Bagged Canister Vacuum

The canister bag keeps ripping on my Kenmore Vacuum model 116.23201C

... Kenmore Vacuums

Could you please send to me the crevice tool for this vacuum and the instructions manuel for this model: Sanyo SCX1000P Powerhead Canister V Denis Lebel Norton Country store RT 114 Norton VT USA 05907 Thanks so much Denis

As far as the Manual is concerned it can be downloaded from: Sanyo SCX1000P Manual ... Vacuums

Fantom Canister The vacuum head light keeps going on and off as well as the suction.  I actually purchased a new head, at the recommendation of their service dept., and the problem is still happening w/the new head.  Any suggestions.

It sounds like you have a hose problem. You should be aware that the Fantom company went bankrupt many years ago. I know that the Fantom name was bought by another company and there may be Chinese units sold under that name, but service and parts ava ... Fantom Vacums Lighting Canister Vacuum

The vaccum keeps turning itself off. - Miele S758 Bagged Canister Vacuum

Look for plugged hose or restriction to air flow. You may be overheating and the thermal limiter is kicking in.... ... Miele S758 Bagged Canister Vacuum

My FIL purchased an Electrolux bagless canister vacuum model EL5 76501 last year. When I tried to use it today, the hose keeps pulling out of the power brush whenever I pull it towards me. it doesn't seem like anything has broken off. The only thing I noticed was that the rubber ring washer seems to be flattened. Could it be something that simple or do you think some part has fallen off and gone missing? Regards, Craig Somersett

I believe I've just had the same problem and after searching for a small gray horsehoe clip that needs to first be found and then inserted into the slot for it on the tube section that comes out of the beater bar. Insert this clip from the outside af ... Electrolux Vacuums

Power keeps going on and off all the time - Sebo X4 Bagged Upright Vacuum

A common thing that happens on this model is that the power cord where it goes into the handle will become broken. Not visually at first, but will give enough of a headache to frustrate you when your vacuuming. \012\012you can check this ... Sebo X4 Bagged Upright Vacuum

Need help with Hoover S3765-040 WindTunnel Electronic Bagless Canister Vacuum. The belt that rotates the brush keeps slipping off. what to do?

The belt could be stretched and that could be causing the slip. Or you could have the wrong belt if you've replaced it recently ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0747 seconds