Having problems with your Shark 2-in-1 Hand And Stick Vacuum ?
Where does the spring go on a handheld vacuum
Repair Help & Product Troubleshooting for Shark 2-in-1 Hand And Stick Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Where does the spring go on a handheld vacuum
... Shark 2-in-1 Hand And Stick Vacuum
Have Dyson DC 14. When tilt to vacuum, the handle and coiled hose comes away from the unit. The problem started when the little purple ridged curved part on front of vacuum cleaner right below handle came loose and a spring fell out from somewhere--don't know where. I pushed on the purple ridge part and it snapped back on. Now, can't get it loose again, don't know where the spring goes, and handle still comes loose from vacuum.
I'm not positive whether or not this is the wand handle because there are several versions of the DC14. However the device the locks and unlocks the wand in place is pretty similar between all the versions.The first picture is the wand re ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
I am replacing a foot pedal on an upright Sharp vacuum cleaner-EC-TU2607. I have the broken foot pedal removed from vacuum cleaner proper but it is the removal of the broken pedal from its spring load that has me puzzled. I applied some pulling effort on the pin that holds the spring in place but there doesn't seem to be any give. Is that the correct approach or is there something else that one should be doing first to release some of the resistance by the pin or spring? Thanks!
... Sharp Twin Energy EC-TU2607 Vacuum
How to wind cord onto spring loaded retractable cord reel for a Kenmore canister vacuum. There is a metal 'U' shaped, spring loaded, piece that fits over the outer aspect of the wheel. If cord needs to get wound on under this metal band I can't figure it out and the band is like factory sealed onto the wheel. Also. I don't know which direction to feed the cord onto the wheel
What is the exact model # please?Thanks!! ... Kenmore Vacuums
I have a DC 15 Dyson Ball Vacuum. I've removed and cleaned the filter. I can't get the lid to close properly. I don't want to force it and break something. There is some kind of a red spring loaded tab that seems to be in the way. How do I reseal the top of the vacuum?
The red tab doesn't let the lid close if the filter is not fitted correctly or the wrong filter is fitted. Many after-market filters cause this problem. \015\012\015\012Have you recently fitted a new after-market filter? ... Dyson DC14 All floors Bagless Upright Cyclonic Vacuum
Reattachment of spring - Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum
... Dirt Devil Vision Turbo W/Bonus Upright Vacuum Vacuum
Vacuum charger not working. - Black & Decker CHV9600 Handheld Vacuum
... Black & Decker CHV9600 Handheld Vacuum
Hi all---I have a Dirt Devil 091020V. there was a problem with the wand where it was the only thing sucking even when it was stuck in the tube it would ****--but nothing from the vacuum end--the diverter was stuck closed I took it apart and found something stuck but in the meantime the torsion spring [I think} fell out and I don't know where it goes--so now only the vacuum works --not the overhead cleaner part.. is there a digram somewhere that can tell me where it goes--I think it might b
The plastic piece with a small spring that holds the vacuum upright broke. Now the vacuum won't stand upright by itself. I don't think if I glue it, it will be strong enough and can't find the part.
... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
My bissell 6583 worked fine for 2 years no problems . Today I vacuumed my sons room, turned the vacuume off, 2 hours later it won't turn on... Help please I'm in the middle of my spring cleaning.
Hi Mary. I can understand how frustrating this can be especially when Spring cleaning. Here is a quick link to troubleshooting steps to assist you with the no power: ... Vacuums
On the bottom of the Fantom Fury where it states:"The United States and Canada utility patent....". Now go to the far right end of this statement (the end opposite the spring, well I have a crack in the plastic which, when toggled, moves the entire plastic underside of the vacuum to move. In other words, I think I need an entire bottom plastic plate. The cracked area also makes the foot lever (which lowers or locks the vacuum handle) not work as the crack makes it impossible to work. I know
Http://www.geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=545424\015\012Generic problem for all Vacuums\015\012On the bottom of the\015\012Posted by c ... Vacuums
Hi, I have a Miele s247i vacuume cleaner- My electric coard does not roll back, How do I open the vacuume lid / housing to fix or replace the spring? do you have instruction manual on how to open the cover?
The kick stand that lowers the vacuum when in use got in a position where the red foot pedal would not come back up to bring the wheels down and the vacuum rest in the upright position. We took it apart and corrected the position, but the side with the small circular spring came out and we are not sure how to attach it back, exactly where it hooks onto. Can you help show us where it goes?
... Dyson DC25 Animal Bagless Upright Vacuum
Dyson dc34 vacuum won't stay on - Dyson DC34 Handheld Vacuum
... Dyson DC34 Handheld Vacuum
Need a filter for pensare T-rex vacuum - Pensare' Rocket V17201 Handheld Vacuum
... Pensare' Rocket V17201 Handheld Vacuum
Hello, I have a Eureka 71b handheld vacuum. There is literally no suction. I checked the hose and it is NOT clogged. I thought it might be the filter so I bought a new filter. Still no filter. The rot
... Eureka Vacuums
Dyson DC16 Handheld Vacuum Cleaner Manual
Yes! Go to www.dyson.com/support. Click on "using your dyson", then (next window) on "select your model", then (next window) on "select your model" again, then (next window) on "DC user guide". And there you are, you've got a copy of the user manual. ... Dyson DC16 Root 6 Bagless Handheld Cyclonic Vacuum
How does the cord winder spring install on a electrolux canister style vacuum cleaner?
... Electrolux Vacuums
ASSEMBLY HOOVER U5432 WHEEL AND SPRING BACK ONTO VACUUM
... Hoover U5432-900 WindTunnel Plus Bagged Upright Vacuum
How to remove turbo power attachment from hoover jovis handheld vacuum cleaner
2001 kirby G6 vacuum wheel fell off. where does the spring go when put back together?
Here are some diagrams that may help you of the G6http://www.vacpartswarehouse.com/Kirby-Generation-VI-G6-Upright-Vacuum-Cleaner-s/ ... Vacuums
Suction weak, vacuum seal spring is releases
I would recommend checking the dyson vacuum brushroll first. If there is any hair or thread wrapped around it you are going to want to cut all of that free ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Spring fell out of dyson dc25 vacuum
... Dyson Dc25 Animal Upright
Black and decker handheld vacuum phv1800 type 1 low battery power
Hi\015\012I know what you mean! My B&D dust buster used to do this too. The hi power boost means that it can only be used for a limited amount of time. Due to the age of the dust buster though its a sign that the battery is on its way out and reg ... Vacuums
How do I replace the handle release lever spring on a Eureka Pet Pal vacuum?