Having problems with your Shark Professional Steam Pocket Mop - Model S3601 new ?

TAKE APART SHARK S3601

\015 I TOOK ALL THE SCREWS THAT I COULD FIND OUT AND STILL COULD NOT OPEN MY SHARK S3601! I'M STILL PLUGGED UP EVEN AFTER RUNNING CLR AFTER A NO STEAM... I GET ALITTLE STEAM NOW JUST NOT ENOUGH TO CLEAN FLOORS. WANT TO TAKE APART AND RUN CLR STRAIGHT THROUGH THE PUMP WITH HOSES GOING IN AND OUT TO A CENTRAL TANK OF CLR.\012ANT HELP HERE?\015

Answers :

There are two screws under "SHARK" decal, and three under steam mode decal (button that controls three steam options)
Repair Help & Product Troubleshooting for Shark Professional Steam Pocket Mop - Model S3601 new

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

TAKE APART SHARK S3601


There are two screws under "SHARK" decal, and three under steam mode decal (button that controls three steam options) ... Shark Professional Steam Pocket Mop - Model S3601 new

HOW DO WE TAKE apart THE BATTERY APART ON THE Shark cordless stikVac


Try this linkhttp://www.sharkclean.com/manual/SV1100_ENG_110916_4.pdf ... Shark Cordless Stikvac Vacuum Cleaner sv800

TAKE APART A SHARK 3601 - Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum


My shark 3601 died on me. A replacement is on its way but I still wanted to take a peek inside. After trying to get it open for about two hours, I figured it out. You have to remove the small screws by where the handle goes in. Then you can work your ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

How do i take apart my shark v1510 vacuum cleaner


... Vacuums

How do I take it apart? - Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum


Go to this link and download the nanualhttp://www.sharkcl ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

How do i take apart my shark euro-pro v1510 hand held vacuum cleaner


... Vacuums

How to take apart the Vac then Steam ( Shark)


... Vacuums

How do you take the Shark G1477R apart? - Vacuums


... Vacuums

Diagram Is there a diagram for taking the entire Shark Navigator apart?


... Shark Helmet Shark Navigator Bagless Upright Vacuum Cleaner

Bissell Healthy Home Vacuum brush stopped working. The hose attachment works fine, just the brush on bottom. Without taking it completely apart, it shows no sign of blockage. Any suggestions? Or, will I have to take it apart?


You will have to remove the bottom plate to get at the brush. The drive belt either slipped off or broke, this will have to be replaced. ... Vacuums

I need to take the canister apart to screw the filter housing back in place. I can't figure out how to take the canister apart or another way to screw the filter housing back in place.


You did not identify your model and the TriStar website does not provide manuals. They do have a FAQ page which does provide some illustrated guidance which may be helpful. See here:\015\012\015\01 ... Tristar Vacuums

Cable stuck in machine (sphera 20). How do I take apart to release cable please? I cannot see any visible screws to take the machine apart. Cable will not retract or come out of machine


... Bosch Vacuums

E series How did you take your rainbow e series apart? Do you have a manual? I've got a few pieces off mine but can't see where any other screws are to completly take apart to be able to look at motor. Thanks Kelly


The clear lenses on either side of the top part of the E-series Rainbow are removable. If you look at the each lens you will see two sections on the top edge of each lens that looks like this |___| |___| about 1 1/2 inches in from each end. Put a ... Rainbow E series Canister Wet/Dry Vacuum

I need to take the canister apart to screw the filter housing back in place. I can't figure out how to take the canister apart or another way to screw the filter housing back in place.


... Tristar Vacuums

How do i disassemble a shark steam pocket s3601


... Shark S3601 Professional Steam Pocket Mop Refurbished White

Shopvac 90L400 quit working (4 years old). Thought the switch was bad but not the problem. I read that there is a fuse link in the motor that frequently burns up. I tried to take motor apart but not sure of the process. I was able to get to the motor but cannot pull it out of the armature. It appears I have to take the aluminum blower unit off the shaft (it appears to be pressed on with a retaining washer). Do I have to take it off to pull the shaft and motor assembly out? Is that where the fuse


By pass the switch and take power right to the motor leads.. that should tell you if the motor is ok.. have not seen fuse link on a vac motor.. graingers has new motors, but not inexpensive ... Vacuums

How do I take apart my Bissell 7920 ProHeat Pro-Tech


Normal\012 0\012 \012 \012 \012 \012 \012 \012 MicrosoftInternetExplorer4\012 \012\012\012\012\012\012 /* Style Definitions */\012 table.MsoNormalTable\012\011{mso-style-name:"Table Normal";\012\011mso-tstyle-rowband-size:0;\012\011mso-ts ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Will not steam. before taking apart is there a


Hi,Look at the manual...Here is a tip that I wrote about the Euro-Pro Shark Steam Mop and why it maynot be getting steam to the head...E ... Euro-Pro Shark Steam Mop - Gray/ Purple Vacuum

I need to know how (if) I can take apart a Miele electric telescoping wand apart to clear some debris from it. Thanks!


Take a close hanger, Or a stick end push it though to clean it out. ... Vacuums

I am trying to take my philips vision 8731 vacuum cleaner apart because a heap of c*** got sucked into the motor when the bag was not put in correctly. I have removed all visible screws but cannot for the life of me find how the wheel end comes apart. any tips?


Generic problem for all Vacuums\015\012I am trying to take\015\012I am trying to take my Philips vision 8731 vacuum cleaner apart because a heap of c*** got sucked into the motor when the bag ... Vacuums

Can you take the Swivel Sweeper battery pack apart to replace the batteries with new rechargeable batteries? Batteries look like AA or AAA, but it appears that the battery pack is sealed. Is there any way to get it apart:?


Yes you can if you have a way to cut through the plastic outer case,(I used a Dremel rotary tool). Inside you will find six double A Ni-mh batteries. I found eight of these for sale on ebay for around ten bucks,then all you do is solder some wire to ... Hoover H3030 FloorMate SpinScrub 500 Upright Wet/Dry Vacuum

We had to take the machine apart just to see that the belt had broken after only 5 use's . We can not see how we are ever going to put the new belt back on. do you have instructions on how to take the belt off and how to put a new one on? Please send me one.


I have a Panasonic MC-V5746 upright vacuum. According to the booklet, \015\012MAKE SURE UNIT IS UNPLUGGED.\015\0121. Place carpet-bare floor selector in "carpet" position.\015\0122. Remove lower plate (there are two screws in the m ... Vacuums

Changing belt How do I do that? It looks like I would have to take the screwdriver to the bottom and enter the engine compartment. I'm not sure that I feel confident to take this machine all apart and be able to get it back together again.


Its not the engine compatment take the screws out the cover 4 the roller will come off then u can c where the belt goes ... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum

How do you take apart a electrolux epic 3500 to take out the circut breacker


... Electrolux Epic 3500 Vacuum

A baby sock was sucked up and stuck where i can't see it in my regina electrikbroom cleaner - 11.4 amp. i have tried to get it out and now i have to take it apart i think and can't get the housing apart - what should i do?


... Regina ElectrikBroom RG100 Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0298 seconds