Having problems with your Sharp Twin Energy EC-12SXT5 Bagged Upright Vacuum ?

Sharp upright vacuum EC-12SXT5

\015 There is a lot of wind generated by the revolving brush, but no suction. I've replaced the belt and checked for obstructions in the hose, but can find none.\015

Answers :

The inlet by the brush roll may be clogged. Alot of times the hose may be clear, but the inlet catches debris and clogs it. Did you drop something down the hose and did it dome out the other side? But if you unhook the hose and there is suction at the hose end, then it should be clogged in the inlet.
Repair Help & Product Troubleshooting for Sharp Twin Energy EC-12SXT5 Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sharp upright vacuum EC-12SXT5


The inlet by the brush roll may be clogged. Alot of times the hose may be clear, but the inlet catches debris and clogs it. Did you drop something down the hose and did it dome out the other side? But if you unhook the hose and there is suction at ... Sharp Twin Energy EC-12SXT5 Bagged Upright Vacuum

Repair sharp ec-14twt6 vacuum and hose - Sharp Twin Energy EC-TU2111 Bagged Upright Vacuum


... Sharp Twin Energy EC-TU2111 Bagged Upright Vacuum

Replacing belt on vacuum cleaner - Sharp Twin Energy EC-T2840 Bagged Upright Vacuum


... Sharp Twin Energy EC-T2840 Bagged Upright Vacuum

Replace sharp vacum headlight - Sharp Upright Vacuum Model 2807, 2809, 2840, 2850, 2860 Brushroll


The light bulb on the sharp upright vacuum is accessed by removing the bottom rug plate. Once that has been removed I believe there is two screws to remove and the light bulb and socket will pull out through the bottom. ... Sharp Upright Vacuum Model 2807, 2809, 2840, 2850, 2860 Brushroll

I am replacing a foot pedal on an upright Sharp vacuum cleaner-EC-TU2607. I have the broken foot pedal removed from vacuum cleaner proper but it is the removal of the broken pedal from its spring load that has me puzzled. I applied some pulling effort on the pin that holds the spring in place but there doesn't seem to be any give. Is that the correct approach or is there something else that one should be doing first to release some of the resistance by the pin or spring? Thanks!


... Sharp Twin Energy EC-TU2607 Vacuum

HI, I'm trying to find a part for a Sharp upright vacuum. Its the back part of the handle where the cord is stored. I have taken it off but can't find any part # on it. The model number for the vacuum is EC12TWT4. I was thinking that if I could find a free owner's manual, that would give me the part # and then I could look for it on the net.


Any vacuum repair shop should be able to get it ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

What size bag does this vacuum use - Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum


Type PU-2 ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

Brushes on sharp twin energy 12twt4 - Sharp Twin Energy EC-T2840 Bagged Upright Vacuum


... Sharp Twin Energy EC-T2840 Bagged Upright Vacuum

How do I replace a sharp powercord? - Sharp Twin Energy EC-TU4606 Bagged Upright Vacuum


I am not familiar with that model. ... Sharp Twin Energy EC-TU4606 Bagged Upright Vacuum

Change belt nv22l sharp upright vacuum


... Sharp Vacuums

I have a Sharp vacuum EC-12TXT4 upright and I want to adjust the height for various carpets, how is this done? I have lost my owners manual and cannot find such manual on the internet. Could you please help?


This model claims to have automatic adjustment. It has two foot pedals at the bottom which gauges the height of the carpet/floor. There's no other way to adjust the height. ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

No suction-all lines and filter are clear - Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum


If the motor runs, check the following:\015\012\015\012Remove the beater brush and clean as best you can. At either end of the brush is a plastic holder that positions the brush in the vacuum body. Add some WD40 to the space between the plast ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

Sharp 12amp upright Twin Energy Vacuum does have the suction it use to have.


... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

Can I download a manual? - Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum


... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

What bag type does this use? - Sharp Twin Energy EC-TU2603 Bagged Upright Vacuum


From what I have been able to research, all Sharp Uprights use type PU-2 bags. ... Sharp Twin Energy EC-TU2603 Bagged Upright Vacuum

How much does a motor cost - Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum


Sharp has stopped making vacuums. The parts are very limited an expensive. Time to get a new vacuum. ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

Beater bar does not work - Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum


You will most likely either need to replace the belt, or remove roller and clean hair out of the ends to let it spin freely ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum

Sharp 8.5 amp, 900 w upright vacuum, new bag, cleared out clog from all intakes, no suction at all...heeeelp


... Sharp Twin Energy EC-T5980 Bagged Upright Vacuum

Replace cord on ect-4770 - Sharp EC-S2365 Upright Vacuum


... Sharp EC-S2365 Upright Vacuum

Vacuum cleaner I am needing to buy a vacuum cleaner - the flooring in our house is mainly oregon pine with loose rugs. I suffer from back problems and find the cylinder vacuums cause a great deal of back strain. I have been told that an upright vacuum is not suitable for wooden floors - I would appreciate any advice, particularly if u know of an upright vacuum cleaner that works well on wooden floors Thank you


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=517227&thid=728380\015\012Vacuum cleaner\015\012Posted by che9 on Jul 01, 2008\015\012I need to buy a vacuum clea ... Electrolux EL7055A Bagless Canister Vacuum

I have a DC 17. In the middle of vacuuming the vacuum stopped working when it was in the upright position. It only works when the head is down and i am using the bar. I can not use the extension bar, becasue when I put the vacuum upright it shuts off. Where is the problem?


Hi there, it's Jack at Dyson.\012 \012 Like most Dyson vacuums, DC17's main suction motor is protected by a thermostat which shuts the machine down if it starts to overheat. This could be due to a blockage, and the filter may also need a wash ... Dyson DC17 Animal Bagless Upright Cyclonic Vacuum

I removed the brush from bottom of the vacuum to remove hair from the bristles. When I re-assembled the vacuum, there was no longer suction. Also, the vacuum no longer stands upright when not in use. It's like something is blocking the upright portion from locking.


... Dyson DC07 Bagless Upright Cyclonic Vacuum

My Oreck vacuum cleaner will only stay on in the upright position. If I try to recline it to vacuum, it shuts off...put it back up and it turns back on. Of course I can't vacuum in the upright position...what do I do?


It sound as if you have a short in the cord or it has come loose from the motor you can take it part by removing the four screws in the buttom of the base plate to see if any of the wires are loose. ... Oreck Vacuums

Now that I just fixed my Lux Legacy canister vacuum, I need help on my other Electrolux Regency Series upright! The vacuum works fine but the rotating brush does not work and the brush motor does not turn on. Tried cleaning the brush and hitting hte reset button to no avail. This upright has a triple setting switch and I checked the each of the wires seem to be attached. Tried rotating the brush by hand and it would not budge. Was going to "encourage" the brush to turn with a set of articula


There are a couple rectangular holes on the bottom of the power nozzle, beside the wheels. These have tabs in them that need released with a standard screwdriver. \015\012 ... Vacuums

The plastic piece with a small spring that holds the vacuum upright broke. Now the vacuum won't stand upright by itself. I don't think if I glue it, it will be strong enough and can't find the part.


... Dyson DC18 all floors Bagless Upright Cyclonic Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0862 seconds