Having problems with your Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum ?
NEED TO CHANGE A BELT
\015 Unfortunately the manual just illistrates obvious thing - how to put the belt on the agitation bar(do they think we'll try to connect it to the handle?). Sharp has a belt guide and yet another metal hook covering the motor shaft. They need to be removed to even get access to the shaft and there is no illustration or explanation how the belt is supposed to fit with them on. My old belt tore and flew off so I can't use it as a guide.\015
First you need to remove the metal cover to expose the brush roll assembly.\012Push up the plastic cover connected to the foot pedal to expose the motor shaft.\012\012\012Remove the brush roll assembly and simply hook the belt on the motor shaft first then pull back the brush roll and push the brush roll back to the slot. There's a small piece of plastic on the left hand side of the brush roll. This piece would go in after the brush is set in the slot. Finally, replace the metal cover.
Repair Help & Product Troubleshooting for Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
MY VACUUM ISN'T PULLING AS STRONG AS IT USED TO SO I THINK IT NEEDS A NEW BELT. I CAN'T FIND THE MANUEL ON IT SO I NEED SOME INSTRUCTIONS ON HOW TO CHANGE THE BELT. I DON'T WANT TO BREAK MY VAC. CAN SOME ONE PLEASE INSTRUCT ME ON HOW I SHOULD CHANGE THE BELT PLEASE. TYPE VAC: EUREKA THE BOSS WHIRLWIND LITE CYCLONIC POWER CANISTER TYPE VAC. THE HANDLE IS DETACHABLE TO CLEAN IN THE CORNER WITH A SMALL EXTENSION.
You can get Eureka replacement belts here:Eureka Vacuum Betls ... Vacuums
I have an 6 month old Dyson 33. Likely need to replace clutch asymbly but still need to change belt's. How do you change those belts without buying another new vacume? Can not remove clutch asym
Here is a video of the dyson clutch change on DC07 witch is the same for DC33 ... Dyson DC-33 MultiFloor Upright Vacuum Cleaner
I accidently ran over a sock while vacuuming underneath my bed and the belt broke (brush does not rotate now). I've always changed the belts in my vacuum cleaners, but the Healthy Home manual states that I need to bring it into a shop so that a professional repairman can change it. I find this ridiculous and now wish that I never bought it. How do I change the belt myself? PS I have already bought a replacement belt.
... Bissell Healthy Home HEPA Bagless Upright Vacuum - Metallic Blue
Changing belt how do you change the belt on the power steamer there is nothing on bissells webiste i need to change the one on the sie not the rollers
Take the water and solution tank out of the machine. turn it over an on the left hand side you will see a red clip with a screw in it. take out that screw. flip the unit back over and take off the belt access cover by sticking a straight screw dri ... Bissell 1697-7 Powersteamer Pro Deluxe Vacuum
I am smelling a faint burning rubber smell and I think the belt needs changing, but I can't figure out how to open the case to change the belt. Can you help me?
... Hoover U5068-900 Sprint Upright Vacuum
My hoover turbo cyclonic needs a new belt replacement I 'am not sure how to change it please tell me how to change the belt
... Hoover U8145-900 Savvy Bagless Upright Cyclonic Vacuum
Its the widepath bagged tempo, i need to change the belt but do not know how. How do i change the belt
If I recall correctly - there are screws in the bottom of the front piece that holds the roller, remove them and a plate will come off. Under the plate you will see the rollerbrush - it should pull out and has plastic tabs with bushings on the ends - ... Hoover Tempo Widepath Upright Vacuum - Blue
Belt location i have a eureka upright the boss whirlwind lite and i need to change the belt. I have no clue where to find it. Need help with this
If you torn the macine over, at the bottom of the sweeper you will see the belt on on side. You have to take the bottom part apart and remove the brushes to replace the belt. I hope this helps. ... Eureka Whirlwind 4388 Bagless Upright Cyclonic Vacuum
Change belt on dirt devil model:085850. need to change belt
... Dirt Devil Featherlight Bagless Upright Vacuum
Need to replace belt on Eureka Powerline 12.0 vac. Screws look like Torx head or something on bottom of vac. Are those the screws that need to come out for changing? If so, what size do I need?
No, do not remove the torx head screws for a belt change. If there are any screws that need to be removed for the belt change, they will be phillips head. What is model # of vac?? ... Eureka Vacuums
Belt locfation need to know where belt is located so I can change belt
An eureka whirlwind lite /the boss how to open to get at the belt ... Vacuums
OUR DYSON 07 SWEEPER HAS VERY LITTLE Vacuum, have cleaned all filters and hoses, on line troubleshooting has said to check soleplate being on correctly, we have done this, still does not have good vacuum, belts are covered by a housing, the video that shows the changing of the belt is not the same, I need to know how to remove the cover to check both belts and any help in gaining the vacuum
This video shows you everything you need to know ... Vacuums
Belt the belt on my dc 14 will not turn does that mean i need a new belt and how do i get it changed
Hi.Your Dyson will probably have A clutch unit this engages the brush roller when you pull the handle back to vacuum.Check the clutch control knob which is at the bottom left front side of machine looking from the front & ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum
Where to get manual Hoover em5200 need to change belt?
Http://vacuumvacuum.com/hooverpart.html \015\012this is the hoover webpage for all models\015\012you'll find what you need there ... Vacuums
NEED TO CHANGE A BELT
First you need to remove the metal cover to expose the brush roll assembly.\012Push up the plastic cover connected to the foot pedal to expose the motor shaft.\012\012\012Remove the brush roll assembly and simply hook the belt on the motor shaft firs ... Sharp Twin Energy EC-12TWT4 Bagged Upright Vacuum
Need to change belts on a Bissell 1699 model
Here is the manual. Also you can go to Bissell.com and use the problemsolver.\015\012\015\012http://www.bissell.com/images/UserGuides/7901_1 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
Vacuum belt keeps coming off. Need instructions on how to change belt on Panasonic mc-6955 upright vacuum cleaner.
Need to change belt. Need instructions. - Eureka 5859ASZ Bagless Upright Vacuum
... Eureka 5859ASZ Bagless Upright Vacuum
The roller has stopped rotating and I wanted to see if the belt needs changing. I cannot find out how to get to where the old belt is located.
Remove the bottom to find the belt. There is usually a spare in the compartment. I think there is 8 or 10 screws.\015\012\015\012Thanks for your interest in FixYa.com\015\012 ... Oreck XL21 Bagged Upright Vacuum
Belt I need instrucions on changing the belt on a Kirby Ultima?
Go herehttp://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039Rob ... Kirby Ultimate G Bagged Upright Vacuum
Need to change belt on hoover upright model u5093-900, but can't figure out how to open it up to get at the belt.
... Hoover Vacuums
I think i need to change the belt on my vacuum, there seems to be a loss of suction when pushing the vacuum. Where can I get one and how do I change it?
How do I fix a broken belt on my vacum ... Eureka 4700A Maxima Bagless Upright Vacuum
Need instructions for Vortex V2000 hoover as need to change the belt
Need help need to change belt on a model #1489a upright vacuum cleaner.
... Eureka Vacuums
I have an old upright hoover vacuum. I need to change the belt but can't figure out how to get to it. The bottom plate over the roller brush comes off but I can't get anything else off to get to the other end of the belt.
Model no. req ... Hoover Vacuums