Having problems with your Shop Vac 584-04-00 Quiet Canister Wet/Dry Vacuum ?

Shop vac got hot & will not run

\015 Is there a safety switch or breaker that kicks it off if it overheats and needs to be reset? that's what it acts like... switch will not power on motor. it was running fine until it got hot and shut down\015

Answers :

Repair Help & Product Troubleshooting for Shop Vac 584-04-00 Quiet Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Shop vac got hot & will not run


... Shop Vac 584-04-00 Quiet Canister Wet/Dry Vacuum

Bought a shop vac about 3-4 mos ago and while i was using it, it cut off and wont cut back on. This is the second shop vac that done this and I took the first one back and got this one and it did the same thing. It is a 12 gal. 4.5 peak hp.


... Shop Vac 401-12-00 Wet/Dry Vacuum

Shop-vac model 90L550A motor wont run


Yes replacing the link would work, but that would not fix the cause. You have either pulled the wiring to the point of pulling apart the connection or there is a short. Which would be in the way of a grounding effect causing the link to heat and melt ... Vacuums

My vac then steam 2in1stoped steaming motor runs gets hot but no steam


... Shark Steam Vacuum, 2-in-1 Vac-then-Steam

Need the manual on how to run (put together and all) the hoover steam vac v2 (widepath) with auto rinse) we tried today and when we leaned it back (so we could run it on the carpet) water started pouring out all over the machine and got the carpet (like flooded) wet :( this one was me mom's and she passed on approx 2 1/2 years :( she always kept the manuals for everything but we caint find this one :( ... thnx


God Bless Your Mom.\015\012\015\012Hope this was helpfull to you. Sawdust46\015\012\015\012http://www.hoover.com/pdfs/manuals/F7411900.p ... Vacuums

For the first time, I tried using my Kirby Sentria shampoo attachment. I've lost the manual but found instructions online for making the swap from regular vac to shampoo-er and got it all assembled. The foam laid down just fine, however, when I run the vac back over the foam to pick it up, there is not a stitch of water showing up in the tray. First I thought maybe it was bc I hadn't put that much of the foam/water onto the carpet, but 12 hours later, the carpet is still wet in spots. Clearly


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=638285\015\012Generic problem for all Vacuums\015\012For the first time, I\015\012Posted by MHicks on J ... Vacuums

RICCA VACUUM PROBLEM **** GOT CAUGHT IN VAC NOW VAC WON'T RUN


... Riccar 8650/8625 s Vacuum

Was running fine, while pulling vac electric cord got tight and stopped running ,,,,,,,any clues,,,thanks, Abb


You have stretched the internal wires of the power supply to a point where they have parted \015\012\015\012You need a man that can to strip the cable back and re-join it ... Shop Vac 201-13 Wet/Dry Vacuum

I have a Miele S1721 Powerhouse upright vacuum. When the belt broke I took it into the shop (because when i tried to replace the belt, the tension was so tight I couldn't get it back together!!). When I got it home I DISCOVERED THAT THE HEIGHT ADJUSTMENT DIDN'T WORK anymore. It seems like it's set really hight, because it no longer contacts and brushes the carpet. So it's now useless. I went back to the shop and the tech denied that there was anything wrong. (I didn't have the vac with me). No


Hi\015\012The Miele uprights (S170 and upwards) with the Powerhouse title are ALL Panasonic uprights which have been at one time sold in the UK. Therefore the upright may use TWO drive belts which need to be looked at: Take off the sole plate a ... Vacuums

I have a ten year old M+S central vac. it shuts off after about 5 min of use. They came out and took the unit to their shop. I dont have the model #.repair shop says I need a new motor but it runs. what can I tell them?


... M&S Systems FX-3000 Bagged Central System Vacuum

Shop vac only runs 15 seconds and shuts off.


Can you clean or blow out the motor part? ... Shop Vac 925-13 Canister Wet/Dry Vacuum

We have the Eureka Capture and it seems the vacumm got hot and stopped, now it won't run. Is there a reset button?


If you go to this URL:\015\012\015\012http://www.ereplacementparts.com/eureka-8853avz-upright-vacuum-parts-c-108750_108773_109342.html\015\012\015\012you will see that item #25 is listed as a circuit protector. You can locate it on the e ... Eureka Capture Upright Vacuum Vacuum

My shop vac won't stay running unless I hold in the power button


... Shop Vac Vacuums

Lost Part I have a 6.5 hp 18 gallon shop vac ultra pro. There is a part that goes into the inside of the tank and screws into the collection hose that attaches it to the tank. This part accidentally got thrown away when someone dumped it and now I cannot attach the hose to use the vacuum. Can this part be purchased separately?


I found a manual online for the shop vac and found the part number. Did locate part online.\015\012Thanks, ... Shop Vac Vacuums

Shop-vac stopped running - Vacuums


... Vacuums

I was using my Rigid WD09450 shop vac and the neighbor wanted to borrow it. When i got it back the noise level had increased tremendously. What could have happened.... nothing seems to be clogged and suction is fine. But the noise hurts my ears.


I need instruction manual asap ... Vacuums

Over heating? My 10 gallon 4HP shop vac has started shutting off after about 30 sec. after I turn it on to use. It smells real hot after I shut it off. I have changed the filter and the bag, which did not solve the problem. Any suggestions on what the problem could be? It's only about 31/2 years old and I really don't use it all that much, mainly for getting up dust and cob-webs from my garage.


It sounds like you need to replace the motor in it . thank you for using fixya ... Shop Vac ShopVac 3 HP 2 Stage 10 Gallon--Automotive Wet/Dry Vacuum Vacuum

Motor stopped running - Shop Vac Vacuums


First ensure the vacuum had not stopped because the bag is full, check also that the hose is not obstructed.If the vacuum does not start at all, check the wiring contacts to the motor, and check the start switch.If there is no ... Shop Vac Vacuums

How can I unclog my shop vac hose? I tried to blow it out but the clog got stuck in the middle of the hose. Then I tried sticking a long stick down it but that didn't work either.


Try a water hose to flush the stuff out ... Shop Vac 925-13 Canister Wet/Dry Vacuum

Sears 16 gallon shop vac that smells like rubber burning when running


... Vacuums

My ridgid WD06250 shop vac has bad motor brushes and won't run. Do you know if I can buy replacements?


Hi, replacements can be found at amazon, click here and take a look: WORKSHOP Vacs Suck It Up Get It Done. I hope this was helpful. Cheers ... Ridgid 9 Gallon Wet/Dry Shop Vac 96882 Canister Vacuum

16 gallon shop vac louder than usual & smells hot


... Vacuums

How to attach hose to shop vac hang up mini - Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum


... Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum

Need a manual for the shop vac model # 2E200 - Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum


... Shop Vac Shop-Vac& Mini Hang Up Wet/Dry Vac Vacuum

How to change mini shop vac filter - Shop Vac Shop-Vac Hang Up Mini Canister Vacuum Cleaner Vacuum


... Shop Vac Shop-Vac Hang Up Mini Canister Vacuum Cleaner Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0565 seconds