Having problems with your Shop Vac 584-06-00 Canister Wet/Dry Vacuum ?

Old red and black Genie Shop Vac

\015 A Wheel or disk has come off of the motor. I would like to get a copy of the user manual to see if I can determine where it came off of. This Genie Shop Vac was given to us from my father-in-law.\015

Answers :

\015\012Old red and black Genie Shop Vac
\015\012Posted by girl power on Jun 10, 2008
\015\012A Wheel or disk has come off of the motor. I would like to get a copy of the user manual to see if I can determine where it came off of. This Genie Shop Vac was given to us from my father-in-law.
I would advise you to ALWAYS to FIRST UNPLUG YOUR VACUUM before beginning any service procedure. You can always check with the manufacturer Shop Vac to get an owner’s manual for the older Genie Shop Vac would be @ the Shop Vac Website and or Customer Service of which I will give you @ the bottom of the response. Other wise check with your local vac dealer in your area. So if you need further assistance, please feel free to contact your local vacuum cleaner dealer in your area or in the yellow pages, or contact the factory phone number or website to further assist you with your questions.

\015\012http://shopvac.com/contact.asp Customer Service 570-326-0502 Phone #
\015\012Shop-Vac Corporation Customer Service 570-326-7185 Fax #
\015\0122323 Reach Road
\015\012P.O. Box 3307
\015\012Williamsport, PA 17701
\015\012Hours are: Monday thru Friday 8:00 am to 5:00 pm (EST)
\015\012Thanks, Don the Vac Man
Go Ahead. Use Us.

Repair Help & Product Troubleshooting for Shop Vac 584-06-00 Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Old red and black Genie Shop Vac

Http://geeksquad.fixya.com/ThreadView.aspx?prdid=19255&thid=659916\015\012Old red and black Genie Shop Vac\015\012Posted by girl power on Jun 10, 2008\015\012A Wh ... Shop Vac 584-06-00 Canister Wet/Dry Vacuum

We have an old genie 5 gal wet/dry vac 1.25 peak hp 60hz 125ph 8.5 amps That is all I can find on it for numbers or letters. The top is bloack, the drum is red. The bag around the filter is to

... Genie Company Vacuums

I have an old Shop Vac model 3331.5. This is a 12 gallon 1.5 hight peak shop vac with a detachable blower. After many years I decided to use the blower feature, but have lost the lost the manual. Question; how do I attach the hoses to the blower? The motor has that cap on it the direct the flow of air in one direction and the wide hoses do not fit over it. I may be missing a part, but I would think the directional cap would have to come off anyway.

Remove the cap that directs the air and insert the hose in there. ... Vacuums

My shop vac just broke a wheel. It is a red 5

... Vacuums

Old shop vac

I have a shop vac model 500a, 1.25hp. The Sears store keep's asking what model is it? when i tell them it's a model 500a,then they say no it's a number starting with 17**** is this 17765, the number i need when ordering bag's and filter's? If so,why ... Craftsman 17765 Canister Wet/Dry Vacuum

Genie 400PC 16 gal shop vac but can't find filters

If you need paper filters, you can easily use a bag filter cut in half, and have less dust clouds than the original filter. Remember to use the lock ring. Generic ShopVac mini's have the same filter in foam. ... Genie Company GV150 Wet/Dry Vacuum

Genie Shop Vac SV125Q

... Genie Company GV150 Wet/Dry Vacuum

Genie Shop Vac Filters

... Genie Company Vacuums

Geni 2 speed 25 Gallon wet/dry shop vac.

... Genie Company Vacuums

The Heath sensor I have is an old model 5411-A. It is seperate from the light fixture. Threr are three wires coming from the sensor: white, black, and red. How do they connect to the black white and ground from my source?

... Vacuums

I have a old Shop-vac Stainless Tank QSP CONTRACTOR Wet/Dry Vac Model QPL625 Original #52722-67 Motor arcing and locking up can I get replacement parts?

You can get new motor off the link belowhttp://www.shopvac.com/shopvac-accessories/Departments/Repla ... Vacuums

Model number U5763900 Serial Number 090400013588 Handle broke off just above the four screws that attach it ti the boby of the vac. Hoover does not list parts for models that are more than two years old. The vac operates perfectly but without a handle my wife cannot use it, where can I find a part replacement. easy to remove four screws and replace. dont want to drive 100 or more miles to find a authorized repair shop. Oh yes, this is a Hoover Preferred Wind Tnnel Bagless

Get over it and buy a new one!!! ... Vacuums

Genie jet vac model 300 pb - Shop Vac 584-06-00 Canister Wet/Dry Vacuum

... Shop Vac 584-06-00 Canister Wet/Dry Vacuum

On off switch stopped working 3rd one to do so this one cannot be returned to old ? model QPV10.5b nothing on shop vac site and nothing comes up on Digi-key site really do not want to buy 150.00 vac again but cannot find on off switch! thanks for your help

Use a higher amp rated switch. If this is not available, then solder and insulate the wires where switch should be, then install an aftermarket in-line switch. ... Vacuums

I have a ten year old M+S central vac. it shuts off after about 5 min of use. They came out and took the unit to their shop. I dont have the model #.repair shop says I need a new motor but it runs. what can I tell them?

... M&S Systems FX-3000 Bagged Central System Vacuum

Need a motor for 35 yr old electrolux model CB cannister shop vac

... Electrolux Vacuums

300pc genie shop vac filter

... Genie Company GV150 Wet/Dry Vacuum

Where can I find a manual for a Genie Shop Vac 200PH

... Genie Company GV150 Wet/Dry Vacuum

I have a dyson animal dc17 vacuum and it totally died. Now I can't figure out which wires go where when I install my new motor. (motor #: 160906G) Do you happen to know where the various color wires go or a place I can see a diagram of the motor with wires attached? I should have taken a photo of it before tearing out the old motor. I don't know where to connect the three coming out from the upright portion of the machine and the red seems to go to a switch (?) and there is a black (connected t

... Vacuums

I am looking for a replacement hose for a 5 gallon GENIE shop wet/dry vac

... Genie Company GV150 Wet/Dry Vacuum

My 88 year old mother bought a Dirt Devel DHC001 - has been used twice but it looks blocked and has no suction but there is suction at the pipe end if I take it off. I have opened the red end and emptied out but there seems to be dust in the rear part and I have no idea how to get it out. The shop she bought it off thought they were being helpful and removed all packaging but seem to have taken instructions as well.

To answer this properly, I am going to need the actual model number on the bottom of the unit on the silver/metallic sticker. Usually MO###### If you can get that I can help you out further. \012Mark ... Vacuums

I have a craftman shop vac model 500A , 5GAL.,1.25hp. why does Sears say that's not the model num. IT'S THE ONLY MODEL NUM. ON IT!!! IF IT'S AN OLD MODEL,WHY DONT THEY SAY IT IS THE SAME AS MODEL#***** AND WHY DOESEN'T THE FILTER,BAG'S ect.SAY, WILL ALSO FIT MODEL 500A

... Craftsman 17765 Canister Wet/Dry Vacuum

Have a Genie 2020L garage door opener. Door start to go down then stop and return. Tried cleaner old sensors. Same. Noticed red light on sensor 3blinks then off....repeat constantly. Replaced sensors - same issue. Reset unit...checked all wiring...no jams anywhere.... HELP PLEASE L:-)

... Vacuums

Have an old Hoover steam Vac and it will spray the cleaner down but will not **** up the cleaner. The red ball keeps coming up right away. What is the problem?

Check the filters, make sure they aren't clogged. Also if this has the foam filter on the inside of the tank lid, make sure it has at least a 1/4 is gap from the top. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum

I need bags for# 6101 for a genie vacumm shop vac

... Genie Company GV150 Wet/Dry Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0449 seconds