Having problems with your Shop Vac 925-13 Canister Wet/Dry Vacuum ?

Sulfur and rusty water in my well how can i clear it up


Answers :

Usually this is from a compromised liner.
Have the well pipe re-lined.
They usually just put as smaller O.D. pipe in.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.
Repair Help & Product Troubleshooting for Shop Vac 925-13 Canister Wet/Dry Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sulfur and rusty water in my well how can i clear it up


Usually this is from a compromised liner.Have the well pipe re-lined.They usually just put as smaller O.D. pipe in.Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question. ... Shop Vac 925-13 Canister Wet/Dry Vacuum

My Hoover Max Extract isn't mixing the shampoo with the clear water. The clear water is functioning properly, any solutions?


... Hoover F6055-900 SteamVac Maxextract LS Wet/Dry Vacuum

I have the Bissell 2x proheat. There is no water being sucked up from the bladder and the cleaning solution is not being sucked in either in order to get to the carpet. On water rinse the carpet gets wet but I'm not seeing any water going through the clear front piece. I live in Harvest Alabama. Where can I take it to get fixed if it needs it?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Bissell ProHeat 2X Select Upright Deep Cleaner not pumping water to floor. Water is not flowing out of the pouch area into the carpet. Water does not come out of the blater, I have checked the line & valve and they are clear how do I check the pump


Make sure you have soap in the soap container or the water will not pump. Sounds strange I know. Even if you have the soap mixture selector turned off, it seems that these machines won't pump clear water unless the soap resovior has fluid in it. D ... Vacuums

I have a old Bissell SC 1632 wet vac. and the water pump turns on i can hear it. but it wont pump the water from the tank. the lines are clear. please help. it's my moms.


... Bissell Vacuums

My Bissell 9200 is not sucking the water into the dirty water resevoir. 1. The gasket on the clear-view seems fine. 2. The suction power just doesn't seem powerful enough (feeling with my hand). 3. The brushes turn fine and belt is fine (not sure if that even matters for this issue). Any help appreciated. Thanks, - Matt


Disassemble all lines and check to see if all O rings are installed. If cracked missing or stretched out of shape no suction will be provided ... Bissell 9200 Upright Vacuum

No Suction The water/soap solution dispensing just fine but when I pull the machine back over the water solution, it is not being sucked up (usually it is easy to see as it you can see the water being pulled up through the clear plastic)


It sounds like the lint filter is clogged. It is located on the top clear plastic piece (the one with the dial to switch from floor to tool use) and is on the underside. It is a small (1 inch square) red plastic piece with a little door on it. Fli ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

I have a k2080 how do I connect to a bucket of water, I have put the clear cord into a bucket but it doesn't draw water to the machine.


... Karcher Vacuums

We have a Bissell Proheat Steam Cleaning machine, Model# 7901-9 08053C. The water is not circulating to clean the carpet. We have delved as deep as possible to clear any blockage. What can be done to get the water circulating again?


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

Bissell 7700 series, pro heat all rounder. Won't spray water. Have checked the line from the unit to the spray nozzel and all seems clear. Water doesn't seem to be flowing from the tank to the end of the unit where the hose connects into. What could be the problem? Any assistance would be greatly appreciated. Thank You. Steve


HelloGrasp the cleaning solution tank, and remove it from the machine. Reinsert the tank into the machine, making sure it fits snugly in the machine. If the tank is even slightly dislodged, water cannot get into the machine. Visually insp ... Vacuums

Royal carpet extractor 7910 won't dispense clear water


... Vacuums

Leaking rusty water


Ensure the black "duckbill" gasket is mounted on the bottom of the dirty water tank. This gasket is removeable, and resembles a duck bill.\015\012\015\012When i purchased mine at Target, new - it was missing the gasket, causing loss of su ... Bissell SpotBot Robotic Wet/Dry Vacuum

My bissell 1699 pro heat clear view upright water


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have a Steam Buggy and have not used it for years. It is full of hard deposits some white some blue. I have rinsed it out and the water is clear, but how do I stop this from happening in the future? Is there anything to clean it with?


Those are mineral deposits. The way to help that is to only use distilled water in the unit. ... Tristar SB Steam Buggy Vacuum

Lost manual dont know were water goes - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here you gohttp://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Water is not going through the machine - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


The pump belt may need to be replaced. You can get the belt and view the manual here:Bissell 1699 ProHeat Belt ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Wont **** up the water. I also need a manual - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here is the manual that the Service Centers use to repair and take apart your system.www.thinkvacuums.com/pdf/uprights/Bissell_Powersteamer_Repair_Guide.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

The solution comes out but not water. - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Did you mix the solution with water thats how they work it,take one cap full they gave you a messuring cup when you got the unit.I hope the solution goes in the same bag so retry the mixing and you should get water and soap ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My Bissel ProHeat carpet shampooer is not spraying to the floor. I have checked the hoses best I can and they appear to be clear, no clogs. The nozzles don't looked clogged either. The above floor hose does spray water. I definitely have not gotten my money's worth from this machine. Any solutions?


... Bissell 9200 Upright Vacuum

My hover steam clear will not **** water back in, i have not used it in over a year.


Depending of your model, some have a duct that sits in front of the recovery tank, if yours has this, is the duct in place? Most have a foam filter on the inside of the recovery tank lid, make sure that there is at least a 1/4 in gap from the filter ... Hoover Vacuums

Poor suction...continued Wow, thanks for answering so quickly! To answer your question, yes, there is suction at the screen, but it is very weak. I keep that screen clean. As a side note, I noticed that when I remove the top clear plastic cover (that would be part # 37 on the diagram, as far as I can tell) there is decent suction coming from the intake there--part 36? 30? it's hard to tell. But with the cover on, I feel no suction (from where it sucks up the water directly from the carpet),


Wish I had it in my shop, it is hard to figure your problem. I do know that you must have something out of place and you may have to take it apart to find it. You may feel some suction there at the top of the clear nozzle, but maybe it isn't strong ... Hoover F6212-900 / F6215-900 SteamVac Agility Upright Vacuum

My bissell want **** up the water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Make sure that where the tank lid lip and the top of the clear noozle has that black oblong gasket on it. Also make sure the filter on the tank lid is clean. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

No spray My Bissell Pro Heat 7901 will not put out any spray. I Took the pump out so I could get at it and disconnected the hoses. I put the one on the input side and the other in a bottle of water. Put the belt on the pump and turned on the machine .Nothing at all coming out of the pump. Where can I get a new pump? Also the lever that goes to the little flapper at the top under the clear plastic piece on the front that connects to the knob that changes from tools to floor broke off. Where can I


Pump part number is 2107181, the diverter valve # 2136988. You can Bissell and they can tell you who may have parts near you, or you maybe able to order thru Bissell.com. Before you took it apart, were you getting water to spray out of the hose. I ... Bissell 7920 ProHeat Pro-Tech Upright Wet/Dry Vacuum

Our bissell will not dispense water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

For the first time, I tried using my Kirby Sentria shampoo attachment. I've lost the manual but found instructions online for making the swap from regular vac to shampoo-er and got it all assembled. The foam laid down just fine, however, when I run the vac back over the foam to pick it up, there is not a stitch of water showing up in the tray. First I thought maybe it was bc I hadn't put that much of the foam/water onto the carpet, but 12 hours later, the carpet is still wet in spots. Clearly


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=0&thid=638285\015\012Generic problem for all Vacuums\015\012For the first time, I\015\012Posted by MHicks on J ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0500 seconds