Having problems with your Simplicity 7850 Premier Bagged Canister Vacuum ?

Simplicity 7 Series Vacuum. Suddenly stopped.

\015 I have a Simplicity 7 Series. Was vacuuming today and it quit. I found the bag was overfull. Vac may have overheated? Is there a reset button?other suggestions?\015

Answers :

There is a thermal reset button on your vaccum. It is on the rear of the unit, just below the attachments and next to the sticker with the serial numer etc on it. The vacuum is designed to turn itself of if too much heat gets built up to prevent it from "burning up."
Overheated in Vacuum speak is burned up. The motor cools itself with the air you allow to pass through it, in this case, you choked it and it burned up. Your machine is probably not worth repairing. I serioiusly doubt there is a reset button that will overcome this though it would be worth a look-see
\015\012If you want to try to replace the motor, visit a fixYa.com advertiser or partner or your local appliance repair place or www.repairclinic.com
\015\012thanks for posting at FixYa.com
Repair Help & Product Troubleshooting for Simplicity 7850 Premier Bagged Canister Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Simplicity 7 Series Vacuum. Suddenly stopped.

There is a thermal reset button on your vaccum. It is on the rear of the unit, just below the attachments and next to the sticker with the serial numer etc on it. The vacuum is designed to turn itself of if too much heat gets built up to prevent it ... Simplicity 7850 Premier Bagged Canister Vacuum

My 400 series Discovery Roomba will no longer charge. It shows a green "charged" light, but when I hit clean, all lights/vacuum, etc just go out and it stops. Irobot says that the entire unit needs to be replaced, but it has to have something to do with the charging mechanism. Any Ideas? I've tried the system reset, and removing/replacing the battery. No effect. The robot doesn't give me the "uh-oh" beeps to be charged. It just stops and goes dead.

... Roomba Robotic Floor Bagless Vacuum

My roomba 400 series keeps stopping on its own

Take off the grill on the back of the bin. The round vacuum impeller is behind it. Make sure that's clean and free of debris. Run the Roomba with that little grill still off the bin-- is the impeller turning? If yes, you may have fixed it. If not, yo ... Roomba Robotic Floor Bagless Vacuum

Simplicity infinity.36 vacuum keeps stopping, why?

... Simplicity 7850 Premier Bagged Canister Vacuum

Simplicity S18L Vacuum cleaner, stopped working.

... Vacuums

Shop Vac Quiet Plus Series Wet Dry Vac stopped and will not turn on. No smoke, smell, doesn't appear to have overheated

... Vacuums

Roomba wont stop going in circles,code 9 comes up, cleaned front caster wheel to no avail. 500 series roomba. called company said we need a new one, if this is the best we can get out of a roomba they are junk.

\015\012\015\012Your bump sensors are malfunctioning. The best thing to do is order a repair kit. I ordered mine from EESolutions.ca and it worked great.. ... iRobot Roomba 560 Robotic Vacuum

My Rainbow e-series will not run. It will turn on, but it sounds like the motor is barely running for a few seconds and then it stops. It will do this over and over.

Remove the water canister and turn the motor on it's side. Try to turn the 'diffuser' device by hand--it should turn freely. If very hard to turn, then one of the motor bearings may have frozen and the plastic case must be removed to access the motor ... Rainbow E series Canister Wet/Dry Vacuum

My simplicity 6 series 6770 vacume has no power to it...plug it in turn on switch and nothing happens

... Vacuums

My power head (carpets) does not rotate at all. I have called Dyson and they walked me thru a series of steps to make the roller move, which initially worked, but now when it rolls it's really slow and stops rolling.

... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

We ran our Platinum Series 18 volt hand vac until it stopped -- charged the battery overnight but it did not charge. is there a problem with the battery charger or what could cause this?

Most problems with what you have stated have to do with bad contacts between the hand held unit and the battery charger.\015\012With the charger unplugged, make sure the contacts on both the charger and hand held unit are clean and not bent.\015\012C ... Black & Decker CHV1500 Bagless Handheld Cyclonic Vacuum

Irobot roomba 500 series moves from the wall spins red light comes on and it stops?

... iRobot Roomba 500 Series Virtual Wall Lighthouse 80201 Robotic Vacuum

Simplicity upright vacuum 6 series is not sucking. Instead blowing out. Help.

There is a tube that usually runs along the side of the vacuum where all the dirt passes through. If you take the bottom off the vacuum you should be able to see it. This will clog from time to time. Try cleaning that out. ... Vacuums

My rainbow vacuum e series stopped working...

... Rainbow E series Canister Wet/Dry Vacuum

We have a series e rainbow cleaner. my wife had been using it i turned off and turned the canister up sie down to get the serial number. it would not turn back on.we need a new hose and thats why i was looking for the serial num. it has a rocker switch and the motor will work on low but will not run on the suction side. i have checked the wiring harnesses out as best i could without taken it all apart. im wondering if it may be the switch. it started once and then stopped.

There is one way to verify if it is the switch.It's kind of dangerous though,but not too bad.You need an extra piece of wire,fairly thick.I would use 4 guage myself.Hold it with pliers,just in case it gets hot.Turn the switch on and hold the wire to ... Rainbow Vacuums

I have a Propress 2500 series steam cleaner which requires a heating element. It stopped working during a small steaming session. I notice now that with sufficient water in the cylinder both lights come on, the on light and the low water light , the second light remains on all the time. Can you help.

... Vacuums

We just used our bissell pro heat 25A3/64D9 series and the top half of the handle is not secure. Infact it flies off in my hand as im cleaning the carpet and it almost hit me in the face!!! It just connects to the lower half but there is nothing to keep it secure. If it is not tight the trigger to squirt water doesnt work and I am stopping and starting. It looks like a major design flaw.

I have a replacement pump belt for my Bissell #25A3/64D9\015\012but cannot find the instructions as to how to put a new one on. My son replaced the last belt, and of course he doesn't remember what he did. Is there any way you could please dire ... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum

Overheated vacuum After I finished vacuuming the library last night I changed the bag and shook out both filters and vacuum would not restart. The canister unit felt real warm to the touch but I had been using it a least 1/2 hour non stop. The bag was pretty full but not overly so. It's a Simplicity canister with power head. The carpet is long shag from the 70's Did it just over heat? Thanks Shauna

It normally won't over heat unless the bag is too full, the filters are clogged, or you have have a clog in the hose or down by the brush roll, the inlet may be clogged. Some will restart after a while, some others have a reset to push. If it won't ... Simplicity 7850 Premier Bagged Canister Vacuum

My simplicity 7 series vacuum belt turns the agitator (beater brush) turns freely by hand when the vacuum is unplugged or off but when I turn the vacuum on the agitator does not spin even though the belt is moving. Could there be a worn out part at the agitator pin where it connects to the flywheel that the belt is connected to?

... Vacuums

I have a simplicity 6 series vacuum. the bag overfilled and vacuum will not run. No power. is there a fuse of relay inside the unit?

No just on /off switch and direct power to vac motor sounds like its burned up from bag being overfilled , now you have to get to the vac motor test it with switch on to see if its getting power if so then motor is burnt.use an ohms meter for power t ... Simplicity 7250 Deluxe Vacuum

Hoover the on-off switch could be the problem will start and stop by itself. model is u2440-900 series is zh12.0 1200.60hz 12.0.a this product is easy to handle havent had that long of course made in china

A common problem with hoover vacuum cleaners is that a wire breaks inside the insulation just where the power cable enters the machine body causing the erratic on off situation you describe.\015\012\015\012There is a connector box inside ... Hoover Vacuums

I have a hoover carpet cleaner model # F7427-900 series Z120 and the rotating brushes stopped moving. How do I fix this?

The brushe until needs to be snapped in very hard; to line up correctly. Pull the unti off and put it back in, good luck. ... Hoover F7425-900 SteamVac V2 Widepath Upright Vacuum

Our dehumidifier(Simplicity Model 43-54006 ) all of a sudden has stopped pulling water out of the air. It runs but it does nothing. Any suggestions? Thank you.

\012Hi,\012There are many reasons why a dehumidifier will not work or collect water.\012Here is a ... Vacuums

Roomba 560 flashing red exclamation mark and makes series of beeps then stops. i cleaned it and it is still doing this. Help?

... iRobot Roomba 560 Robotic Vacuum

Simplicity synchronicity brush roller and headlamps not working, hose still works. Only used brand new vacuum for 10 minutes before it stopped working!

... Electrolux Central Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0560 seconds