Having problems with your Vapor Professionals TR5 Pro Handheld Steam Cleaner ?

Tr5 steam clear on/off switch. Is it 2 pole - on/off


Answers :

Repair Help & Product Troubleshooting for Vapor Professionals TR5 Pro Handheld Steam Cleaner

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tr5 steam clear on/off switch. Is it 2 pole - on/off


... Vapor Professionals TR5 Pro Handheld Steam Cleaner

Rowenta dr5015 won't steam - Rowenta DR5015 UltraSteam Handheld Fabric Garment Steamer Steam Brush, 110V, Continuous Pump, Var Steam, Clear Tank, Pad Brush Removes Lint DR5020DV


... Rowenta DR5015 UltraSteam Handheld Fabric Garment Steamer Steam Brush, 110V, Continuous Pump, Var Steam, Clear Tank, Pad Brush Removes Lint DR5020DV

Bissell ProHeat Clearview Steam Cleaner - need steps to clean the clear input area. I have removed the four screws and need to know how to finish the removal of the clear plastic input area.


For the clear outer nozzle, there are 2 screws holding it in place. Remove those, then from the bottom lift it up. Sometimes the seal holds it really tight and you may have to carefully pry on the sides until it loosens up. Then when you put it ba ... Bissell Vacuums

How do i operate the steam cleaner machine - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here is a link to the user guidehttp://www.dirtdevil.com/search.aspx?type=3 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Hi I have a Shark Super Steamer- hand held that I have not used in awhile and now it won't blow the steam out! I have rinsed the tank, soaked it w/ white vinegar - removed the cap and tried to make sure the hole where the steam comes out is clear with no luck....


... Vacuums

Bissell steam cleaner water leaking - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My bissell steam cleaner clear views keeps


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 9500 ProHeat 2X CleanShot Upright Deep Cleaner, Red Berends Vacuum

Tr5 steam only cleaner, how good is it!!


... Euro-Pro Shark SC-505 Handheld Steam Vacuum

Scrub roller wont spin - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Pull the bottom cover off and replace the drive belt for the brush drum, if the belt is ok then replace the drive motor for the brushes. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

It wont **** up the water anymore. why not? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Try this it might help on the lid of the water bucket you will find a red filter if this is dirty give it a wash and see if that helps, also make sure the black seal is in place on the top of the window where the water bucket overlaps, also if the cl ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

The solution comes out but not water. - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Did you mix the solution with water thats how they work it,take one cap full they gave you a messuring cup when you got the unit.I hope the solution goes in the same bag so retry the mixing and you should get water and soap ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Our bissell will not dispense water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Bissell Proheat user manual - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Hi,Here is a tip that will give you all the information you need to fix your Bissell Proheat Vacuum Problem.B ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Hoover carpet steam clear


Is this a V2? The F5914-900 just has a solution tank. The V2 has a small soap tan attached to he water tank. If you have a V2, the seal or plunger at the bottom may be bad and can be replaced. The reservior asm. that the tank sits on may be bad. ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

Lost manual dont know were water goes - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Here you gohttp://www.bissell.com/images/UserGuides/7901_1008.pdf ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Water is not going through the machine - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


The pump belt may need to be replaced. You can get the belt and view the manual here:Bissell 1699 ProHeat Belt ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

SOLUTION IS LEAKING OUT THE BOTTOM - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Did the gasket on the bottom of the water tank come off and is either missing or sitting in the hole where the tank sits? It needs to be on the tank. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

1699 ProHeat Clear View Upright Steam Vacuum


Http://geeksquad.fixya.com/ThreadView.aspx?prdid=49925&thid=639852\015\0121699 ProHeat Clear View Upright Steam Vacuum\015\012Posted by wmwmsjr on Jun 02, 2008\015\012 ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My bissell want **** up the water - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Make sure that where the tank lid lip and the top of the clear noozle has that black oblong gasket on it. Also make sure the filter on the tank lid is clean. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

I have a Steam Buggy and have not used it for years. It is full of hard deposits some white some blue. I have rinsed it out and the water is clear, but how do I stop this from happening in the future? Is there anything to clean it with?


Those are mineral deposits. The way to help that is to only use distilled water in the unit. ... Tristar SB Steam Buggy Vacuum

How do I know the rinse feature is working? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


You won't see any saop suds being sucked up, just clear water. ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

Broken belt how to fix i have a belt - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Take off belt cover on the left side of the top cover, turn cleaner over, take out screw from red lock and remove, pull cap and brush roll out, unhook the cogged belt, then you can replace the pump belt thru that opening. Put belt over the pump pull ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

How do I work this dam thing????? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


How do I work this?\015\012Bissell 1699 ProHeat Clear View Upright Steamer\015\012How do I work this dam thing?????\015\012 \015\012I would advise you to ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum

My hover steam clear will not **** water back in, i have not used it in over a year.


Depending of your model, some have a duct that sits in front of the recovery tank, if yours has this, is the duct in place? Most have a foam filter on the inside of the recovery tank lid, make sure that there is at least a 1/4 in gap from the filter ... Hoover Vacuums

How to check the location of the pump belt? - Bissell 1699 ProHeat Clear View Upright Steam Vacuum


Take off belt cover on the left side of the top cover, turn cleaner over, take out screw from red lock and remove, pull cap and brush roll out, unhook the cogged belt, then you can replace the pump belt thru that opening. Put belt over the pump pull ... Bissell 1699 ProHeat Clear View Upright Steam Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0339 seconds