Having problems with your Westinghouse WST1600 Upright Vacuum ?

If you are going to junk your Westinghouse WT1600 I need a part!

\015 Hi....I hope someone out there can help me. My vacuum works fine but my 13 year old daughter broke a part on it. It's the clear peice under the vacuum...in the manual they call it the " inspection plate." It has to tabs to remove it. My daughter broke one of the tabs off and now when using the vacuum the inspectin plate drags the floor. If anyone out there is going to toss out their vacuum, I'd buy the part and/or pay to have it sent to me. Please contact me if you can help. I'd really appreciate it.\015\012Brian\015

Answers :

I have the whole vaccume cleaner and charger in very good condition. You can have it all just pick it up or pay for the shipping . it is FREE . The catch is you have to take the whole machine and charger. This could be a good thing as you may need parts in the future. 
Repair Help & Product Troubleshooting for Westinghouse WST1600 Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

If you are going to junk your Westinghouse WT1600 I need a part!

I have the whole vaccume cleaner and charger in very good condition. You can have it all just pick it up or pay for the shipping . it is FREE . The catch is you have to take the whole machine and charger. This could be a good thing as you may need pa ... Westinghouse WST1600 Upright Vacuum

I need the part that go's on to the steam handle for the other attchments to work. Let's see that's steam handle missing part then Other Attchments this is the only way I can name it, I hope you can understand what part I need. THANK'S

Hi,\015\012\015\012I have a better solution. Here is the parts diagram for the S3325. Please tell me which number relates to the part you need and I will find suppliers for you and the correct price. If your vacuum is not the S3325, pl ... Euro-Pro S3325 Handheld Steam Vacuum

We have a kenmore canister vacuum, the part that is attached to the wand that picks up the dirt doesn't work, when it's on the carpet the light does not go on. Do we need to buy a new vacuum or is there a replacement for this part.

Hard to say without the correct model number.\015\012\015\012However, you could check these things first:\015\012\015\0121- Is the belt that runs the brushes on the end pieces broken? If it is, is needs to be replaced.\015\0122- Is there ... Kenmore Vacuums

I need assembly instructions for a GardenLine hose reel trolley as the instructions that came with it are so vague and do not tell you where all the parts go.

Check for GardenLine parts here Gardenline Einhell Genuine Spares and Accessories Buy Online ... Vacuums

Roomba wont stop going in circles,code 9 comes up, cleaned front caster wheel to no avail. 500 series roomba. called company said we need a new one, if this is the best we can get out of a roomba they are junk.

\015\012\015\012Your bump sensors are malfunctioning. The best thing to do is order a repair kit. I ordered mine from EESolutions.ca and it worked great.. ... iRobot Roomba 560 Robotic Vacuum

Need Grease Bottle for Grill 2 Go Fire + Ice part number 69-6048-003-200

... Vacuums

I have a bissell powerlifter carpet and upholstery cleaner purchased in 2000-2001 by my wife. the sprayer does not work, it appears that the liquid is not being pulled up out of the tank. i am wondering if there is a part missing from machine. something that may need to go into the main tank. please advise.

I knew someone who had a problem with bissell before. I think they had to take it apart and clean the hose, dirt could be clogging it. Or you could try contacting the company. ... Bissell Vacuums

Drive lever the neutral/ drive lever does not engage. seems loose. I have open up the bottom of gear area and have a loose bracket,how does it go back together, need a parts diagram?

Assembly instructions (lots of pictures) HERE. ... Kirby Ultimate G Bagged Upright Vacuum

Need a top cover for our Bissell Pro - Heat Pro-Tech 7901W as the spaces where the screws go through to the base have broke through. Where are the service or parts stores located?

You can go to bissell.com to get help. But you can also use a longer screw with a washer to use in the back 2 holes, that will tighten up the top to the base. Or you can order a replacement top. You can check with your local repair shops to see if ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum

We have a Kenmore Grab-N-Go Upright Vacuum with a Hepa filter. We lost the yellow filter canister that goes in the top of the vacuum and need to replace it and the filter that goes in it. Is there somewhere we can purchase a replacement part?

... Kenmore 34722 Grab-N-Go Upright Vacuum

Need parts for Bissell Power Steamer Model 1695

... Bissell Carpet Cleaner Powerbrush Deep Cleaner Vacuum

What's your problem?I have to replace the power switch on my Hoover U6485-900. What part do I need to orer? Wher can I order it?

... Hoover U6485900 Bagged Upright Vacuum

Need Sebo x-1 parts

Hicontact them direct they will help you outSEBO America, LLC\015\012\011\0117472 S. Tucson Way, Suite 190\015\012\011\011Centennial, CO 80112or look herehttp://www.sebo-vacuums.com/frameset.htm ... Sebo Automatic X1 Bagged Upright Vacuum

I need a service manual for an Electrolux C104A vaccuum. I know the part I need but don't have a part number. The part description is the hose connector at the beater attachment.

If you talking about the part that swivels it is called the elbow and the part number is 46861. ... Electrolux Guardian Bagged Canister Vacuum

Need part for stand of Hamilton Beach Scovill Model 44 Mixer. Part is locking rocker tab that hold mixer in place on stand or press to remove mixer head from stand. Don't need spring or pivot pin, just rocker tab. Don't have part number.

... Vacuums

Need to know if a replacement part can be purchased and where


My older Dyson DC14 (the purple one) early model with a clutch on the beater bar belt needs a clutch replacement. The bar has been cleaned and there are no worn or damaged parts so I conclude that the clutch at the motor end of the belt needs to be replaced. I can find the part online but no instructions on how to disassemble the vacuum to get to and replace it. Dysons only advice is to give me the address and phone of the nearest service center. Can you help me?

Have a look at www.dysonmedic.com which has some very useful info on dismantling and repairing Dysons.\015\012\015\012Although this site doesnt actually cover the DC1 ... Dyson DC14 Animal Bagless Upright Cyclonic Vacuum

Need parts Anyone know where I may find replacement parts for this cleaner? I also need a manual. Thanks

Go to this site they have the schematic and replacement parts.\015\012http://www.hescoinc.com/vacuum_cleaner_parts/bissell.html ... Bissell 1631 PowerSteamer ProHeat Canister Vacuum

I need parts for a bagless canister vacuum maded by suzhou eupo. model HVC-22. need parts and manual

... Dyson Vacuums

Part needed Need part 22 accessory adapter for Shark Model S 3325 Steam blaster

We need this part , too. If anyone knows the actual part number (as opposed to the manual reference #) I'd love to know. Euro-Pro DOES carry this part, as part of an accessory kit for $20 plus who-knows-what for shipping. It's highway robbery! Th ... Euro-Pro S3325 Handheld Steam Vacuum

I just need the part number for my Guardian Electrolux model C134A i ran over the Hose and that was the part that broke. i need to compare prices so i can determine if it is cost effictive to change the switch or get a new hose

The part number for the hose is 47086.\015\012The best thing to do is contact the nearest Aerus Electrolux dealer. \015\012If it's just the switch or handle that broke, it will be more cost effective to have that replaced. If I remember ... Electrolux Guardian Bagged Canister Vacuum

Water does not go to the recovery tank at the bottom need help

You want to check the lid on the bottom on your tank. If you can stand in front of the machine, while it's in the upright position and pull on the lid, if it moves you have it on wrong. Try putting the lid on the front to the back, ins ... Hoover SteamVac F5914-900 SpinScrub Upright Vacuum

The female part of the catch which holds the lid to the accessories compartment closed has broken. This forms part of the handle to the vacuum cleaner.We've had the vacuum for less than a year but cant find the receipt so i think i will just have to pay for the parts. What is the part called that i need or the part number and where can i get it from. Many thanks

Even if you do not have the receipt you are still entitled to one or two year warranty.Since appliance sales are recorded after-sale by manufacturer, you need to contact the manufacturer to validate the warranty and get the replacement. ... Nilfisk Vacuums

Kenmore Model 116.33922 upright - I need a hose unit - Part # KC84PCDBZV07 - Sears parts told me it was not available to contact the Manufacturer - Kenmore (per them) - Their site sends me to Sears Parts! Where can I find this part?

... Kenmore 31913 Progressive Direct Drive Bagged Upright Vacuum

Electrolux Genesis 1572F: 1) One of the two spring/clips/whatever that hold the upright upright for storage has busted. What is the part called? Where might I find a spare? Or should I go to a machine shop? 2) The power cord retainer thingy on the back of the handle grip has broken; any idea about part#, name of part, where to look? (I can't find a manual or whatever, exploded parts diagram, etc., online. I guess this is the planned obsolescence thing--after all, the machine is hardly even 2

... Electrolux EL7020A Oxygen 3 Ultra Canister Vacuum Cleaner Bagged Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0752 seconds