Having problems with your Windsor SR12 Sensor Bagged Upright Vacuum ?

How do I change the belt on my Kirby G 2000 Limited Edition?


Answers :

Lift the head two pedal clicks off the carpet.
Lift the headlight and you will find a silver thumb dial to remove the carpet head. At the front of the head there is a square dial which you must rotate to release the belt if not broken. Rotate the square dial , then release the silver thumb dial under the light housing and the head will detach.
Flip it upside down to expose the brush and open the grate covering the brush. Note on either end there are colored leveling blocks for the brush. Reinstall with same colors showing.
Clean any hair and thread from the brush roll and insert new genuine belt. reinstall in opposite order, Be sure to turn the square dial backward to align the belt in a twist pattern before reinstalling the head onto the vac.Then lower onto carpet with pedal.
Repair Help & Product Troubleshooting for Windsor SR12 Sensor Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the belt on my Kirby G 2000 Limited Edition?


Lift the head two pedal clicks off the carpet.Lift the headlight and you will find a silver thumb dial to remove the carpet head. At the front of the head there is a square dial which you must rotate to release the belt if not broken. Rotate th ... Windsor SR12 Sensor Bagged Upright Vacuum

Changeing belt I have a Eureka Upright Limited Edition Model 4462D and can not for the life of me find my manual and can not find the screws to take off the plate to change my belt.....help!!!!!


On the top nozzle, there will usually is 2 screws holding the top done. There are slots or holes on each side near the front and the screws or in these holes. Remove them, remove the top cover and then you can get to the brush roll and belt. ... Eureka 2991AVZ Bagless Upright Cyclonic Vacuum

I have torn my file cabinet apart, and cannot locate my manual for my Kirby 2001 Limited Edition. I am trying to replace the belt, and need the manual in order to do so.


Kirby models are all very similar. The only manual I've been able to locate is for the G6. You can download or print it from the below link.\015\012ht ... Kirby G4 Bagged Upright Vacuum

We have the Kirby G six 2001 Limited edition vacuum and we cannot get the belt to hook on to the roller brush.


... Kirby G6 Bagged Upright Vacuum

How do I change a balt on a kirby G 2000 Limited Edition vacuum cleaner


Here is a link to a video showing how to change the belt on a Kirby http://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm ... Kirby Ultimate G Bagged Upright Vacuum

Don't know how to change belt on the 2001 G limited edition, having problem taking off the brush.


Raise the height adjustment to it's highest setting.Turn the belt lifter knob on the brushead counterclockwise till it stops.Remove the brushead,then turn the belt lifter clockwise till it stops,releasing the belt.Turn the brushead around to the back ... Kirby Ultimate G Bagged Upright Vacuum

How to change belt on the kirby ultimate g series diamond edition?


Hi There,\015\012\015\012Here's a very helpful video that we've shot showing you exactly how to replace the belt on a Kirby Generation series, including your Ultimate G. The video also shows you how to perform basic maintenance on your ... Kirby Ultimate G Bagged Upright Vacuum

Kirby G4D belt change . haven't changed the belt in years ! not sure who it goes on, or around the the spool housing ??


Changing belt on Kirby is a bit complicated. Kirby Co. just did not make it easy for their customers. You have to be careful when installing the brush roll back. Brush roll end caps have to be put back a certain way. For detailed instructions with pi ... Kirby G4 Bagged Upright Vacuum

Changing a belt on kirby G6


I have written an online guide to help with this issue. Click on the link to view the guide.\015\012\015\012 \015\012\015\012 ... Kirby G6 Bagged Upright Vacuum

How do I change the belt on my KIRBY CLASSIC OMEGA 1 CB ?


... Vacuums

I have a kirby 2000 g limited edition, and I am looking for a hose that will fit it. Do you know the part number by any chance or another Kirby hose that is interchangeable? Any help will be appereciated. Thank You, Lori


... Kirby Vacuums

Belt I need instrucions on changing the belt on a Kirby Ultima?


Go herehttp://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039Rob ... Kirby Ultimate G Bagged Upright Vacuum

How to belt change on kirby clasic III - Kirby Vacuums


... Kirby Vacuums

How to change belt on kirby heritage vacuum - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

Unclogging drains? I've recently read (I believe it was on your Ebay site) that they can unclog drains. Can you please briefly give me the basic steps when doing this? What attachment(s) are used? How is the vacuum configured? ***Also - My Kirby is actually (according to the front label on the arm) a "Kirby G 2000 Limited Edition" Thank you!


Hi!You need to take the power nozzle off and attach the thing that looks like a little plastic cup with two hooks on it. This is the intake guard. Attach it to the front. Now remove the cloth bag and put the hose on the hole where the bag was. ... Kirby G5 Bagged Upright Vacuum

How can I change the belt on the kirby vacuum shampooer brush roller. There is no way to snap the roller out and it seems that trying to unscrew the end isn't doing anything either.Model 5584 renovation group is what is written on the shampooer attachment. The kirby is a heritage model 2HD - purchased in the late 1980's.


... Kirby G6 Bagged Upright Vacuum

How to change belt on kirby heritage 2? - Kirby Heritage II Vacuum


... Kirby Heritage II Vacuum

How do i change my belt on the kirby g6 - Kirby G6 Bagged Upright Vacuum


Hello,For detailed, step by step instructions (with pictures):http://www.goodvac.com/articles.asp?id=143Hope this helps! Ple ... Kirby G6 Bagged Upright Vacuum

Change the belt on a Kirby - Kirby G4 Bagged Upright Vacuum


CHANGING THE BELT ON KIRBY G3 G4 G5 GSIX ULTIMATE ... Kirby G4 Bagged Upright Vacuum

Belt for kirby 2000 g limited edtion - Kirby Vacuums


I have troble resetting the belt on my Kirby 2000 vacuum cleaner ... Kirby Vacuums

Kirby tradition belt change


This video will give you full instructions ... Vacuums

How do I change the belt on the diamond series kirby vacuum


Http://www.kirby.com/Portals/0/videos.htmlThis web page has a video that will show how to change the belt. ... Kirby Vacuums

How do we change the belt on our Kirby Vacuum Cleaner


Here is a link to a video explaining how to change the belt on a Kirby vacuum. It is at the bottom of the pagehttp://www.totalvac.com/videos/kirby-vacuum-cleaners-videos.htm ... Kirby Heritage II Vacuum

I can't change the belt on my Ultimate G Diamond Edition


You have to take the nozzle off. Then twist the handle to OFF position to catch and stretch the belt, put the nozzle back and then twist the knob to ON.Instructions with pictures ... Kirby Ultimate G Bagged Upright Vacuum

Changing belt on Kirby Classic 1972


When you turned the knob, did it turn easily or hard. If it was easy, then the knob part inside did not catch the belt. If it did turn hard, when you had the brush roll off, did you check the ends to see if they turned easily or not. if not, then r ... Vacuums
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0497 seconds