Having problems with your Windsor SR12 Sensor Bagged Upright Vacuum ?

Windsor sensor sr12

\015 Does anyone know where I can download a manual for this machine.\015

Answers :

There is a downloadable manual from http://www.windsorind.com/ go to documents, and note it is in alphabetical order -- so page through to "sensor" or you can search on the word "sensor" (don't include SR12). Also excellent training video on youtube http://www.youtube.com/watch?v=ikhtNFEKpeg.
\015\012
\015\012I think, but not validated yet, that the Sensor SR12 (residential model) has been discontinued as I found it listed in their manuals under the discontinued section as well.
There is an actual download online available but the model numbers are slightly different. If you visit www.sebo.de and select the ENGLISH go through to the SERVICE link and you'll see the DOWNLOAD menu. Click on that and you'll be given the entire European Sebo list of products. Look for the following info and seek out the the following numbers which are the same as the SR12: Instruction manuals are saved in PDF format.
\015\012\015\012\015\012
\015\012Sebo Automatic XP1\015\012Sebo Automatic XP2\015\012Sebo Automatic XP3\015\012
\015\012If your SR12 has the four LED light panel at the front then it is based on the Sebo Automatic XP1/2/3 series.\015\012
\015\012Sebo Professional G1\015\012Sebo Professional G2\015\012
\015\012If the SR12 only has the two LED panel on the front which shows a clogged brush light and a bag fill light, then this comes under the Professional G1/G2 series. 
Repair Help & Product Troubleshooting for Windsor SR12 Sensor Bagged Upright Vacuum

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Windsor Sensor XP18 brush - Windsor SR12 Sensor Bagged Upright Vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

My windsor sensor xp12 wont turn on - Windsor SR12 Sensor Bagged Upright Vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor s12 turns of and on when using - Windsor SR12 Sensor Bagged Upright Vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

Need to replace vacuum door - Windsor SR12 Sensor Bagged Upright Vacuum


I pried up the back of the cover holding the height adjustment wheel and was able to snap the cover axle with the cover installed into place. ... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor sensor sr12


There is a downloadable manual from http://www.windsorind.com/ go to documents, and note it is in alphabetical order -- so page through to "sensor" or you can search on the wo ... Windsor SR12 Sensor Bagged Upright Vacuum

Change wheels on Sensor SR12


... Windsor SR12 Sensor Bagged Upright Vacuum

Sensor xp 15 shutting down - Winsor Windsor SENSOR XP 12 Vacuum


If you have one of your red lights flashing or on all the time that will indicate where you need to look for your repair. Beater bar light will indicate a brush roll replacement and the bag light indicates a need to empty the bag or look for a clog ... Winsor Windsor SENSOR XP 12 Vacuum

My vacuum windsor sensor 12 is not working. I have relaced the bag, the sensor, the roller, the cord and the air filter but is not working. can you help me?


... Windsor SR12 Sensor Bagged Upright Vacuum

I have a Windsor Sensor s12 and power shuts off after 5 min. of vacuuming. I'm wondering if it's overheating of if there is some other sensor that causes it to shut off.


Your Sensor most likely has an internal heat sensor that is shutting off the motor. Some vacuums install an external heat sensor with a reset button that you must push to re-start the vacuum. If your model does not have an external reset button it is ... Windsor SR12 Sensor Bagged Upright Vacuum

No Power to Windsor Sensor XP12


The Windsor Sensor vacs all have a removable handle.\015\012\015\012The handle is inserted into a "socket" which has contacts to complete the electrical circuit.\015\012\015\012The handle is held in place by a gray plastic lev ... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor Sensor XP18 Vacuum


Go to www.windsorind.com/documents/servicemanuals and print out the PDF document. John ... Windsor SR12 Sensor Bagged Upright Vacuum

Need to replace belt on Windsor Sensor 12 vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

How do you disassemble a windsor sensor s12 vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum

How do I remove the brush on the windsor sensor S15


... Windsor SR12 Sensor Bagged Upright Vacuum

How to replace bypass valve switch on windsor sensor vacum


... Windsor SR12 Sensor Bagged Upright Vacuum

My windsor sensor 12 inch vacuum is to hard to push. I bought a new one and its doing the same thing. My vacuum repair man says he cant fix the problem. My shoulders are sore from working so hard. Help


It\\'s possibly the type of carpet you\\'re using it on. The sensors use the brush speed and the amount of air flow to determine carpet height. Some berber, and tweeds make these things horrible to push. We sell sebo, who make the windsor and we\\'ve ... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor Sensor xp15 Loss of Suction?


... Vacuums

Windsor Sensor 12 Vacuum No Power


I'm an engineer for Hyatt hotels and I've worked with the S12 vacuums for a few years now. The most common problem electrically lies in the main switch and the power cord. Almost at no time in the past three years and working for 4 hotels have I had ... Vacuums

Windsor sensor says bag is full when its not


Are you vacuuming up fine particals like pet dander or just large amounts of regular dust? Also when was the last time you replaced your filters? \015\012\015\012Just some sugestions. ... Windsor SR12 Sensor Bagged Upright Vacuum

Windsor Sensor Vacuum


Mine did this and i took it apart and in the base are two connectors that were rusted...i sanded them and it worked fine after that ... Vacuums

Windsor sensor s12


... Vacuums

My Windsor Sensor XP12 says the bag is full when it's not. I have removed the hose, brush, and filter and cleaned everything. I can put a bag on without the cover and it works great. However, when I add the bag to the front cover and close the latch the right way, it does not work. I'm thinking that the cover is not seating the bag correctly over the hole, but I can't figure out how to fix it. Any suggestions?


... Windsor SR12 Sensor Bagged Upright Vacuum

Servicing windsor sensor xp15


You need to replace your beater bar more than likely, if the light stays on all the time. If it is flashing there is usually something jamming the brush roller from turning properly. ... Winsor Windsor SENSOR XP15 Vacuum

Windsor sensor s15 bag full light comes on and machine shuts down


... Winsor Windsor Sensor S15 Commercial Upright Vacuum Cleaner

Clogged vacuum cleaner windsor sr12 bagged upright vacuum


... Windsor SR12 Sensor Bagged Upright Vacuum
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.mictaservice.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0090 seconds