Having problems with your Vacuums ?
Im trying to replace the belt but cannot find where to connect it
\015 Im trying to replace the belt but cannot for the life of me locate the area in which the belt attaches after it is on the brush.\015
Vacuums are different. Look for a small motor shaft within the belt's reach.
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Im trying to replace the belt but cannot find where to connect it
Vacuums are different. Look for a small motor shaft within the belt's reach. ... Vacuums
I have an old Hoover vacuum model # U5035-930. The belt broke and I tried replacing the belt myself. I couldn't stretch the belt to attach it to the motor pully. It was belt # 38525-027 M6. Which I got from the previous owner. I took it to a vacuum repair place and he replaced it with belt # 38528-027 J4. I cannot find this belt anywhere.
My belt broke and I cannot find a replacement anywhere. Can you tell me where I can buy replacement Sweep n Groom belts for my central vacuum system.
You can get replacement Sweep n Groom belts here:\015\012\015\012Sweep n Groom Belts ... Vacuums
Trying to find a manual to replace power bush belt
Hi,Here is a tip that will give you all the information you need to fix your BissellProheat Vacuum Problem.Bissell Proheat Upright Wet/ ... Bissell 7901-1 ProHeat Scotchgard Upright Wet/Dry Vacuum
Hoover Wind Tunnel U6458-900 Self Propel doesn't work - via other expert advice here for other models of Hoover - I'm thinking it is the actuator that needs to be replaced as I can see the cable does not connect to anything on the bottom. My problem is - I can't get the cover off. Been trying for a couple of hours. I removed every screw I can seem to find but something is hold it down. I also am wondering if/when I do eventually get the cover off, would I need to replace the cable when I replac
On some models there are hook/springs that hold the cover of the base snug. ... Hoover U6437-900 / U6439-900 Windtunnel Bagged Upright Vacuum
We own a dirt devil model 088600, and are experiencing a problem with the belt wearing away a section between where the belt connects to the brushes and the motor. There is a lot of plastic/rubber residue coming out from the vacuum. We have tried new belts only to find the same problem occurs. I noticed that the source of the dust is coming from the section between the brushes and motor, where there appears to be a section that is misshapen and melted. I looked up the schematic online and can't
If you are certain that the belt is seated correctly and the beater bar is nested in its holder and the cover of the assembly has been properly installed and you still see a contact area between the belt and cover, you should either: return the vac ... Dirt Devil Vacuums
I am using a Kirby Hertigae II shampoo attachment and the belt broke, I am trying to replace the belt, but cannot remove the bottom brush that the belt hooks onto.
Try using a pair of pliers on each side to remove the screws you only need to remove 1 ... Kirby Heritage II Vacuum
I need to replace the belt on my hoover fusion plus upright vac. But I cannot find what belt it takes. the number on the belt is worn off
Hello : \015\012\015\0121:Unplug your Hoover vacuum. Turn the vacuum up-side-down and place the motor and vacuum portion on a counter top with the handle hanging down toward the floor. This makes it easy to work on the underside of ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum
Belt gone in EL6986 power nozzle. cannot find replacement
... Electrolux EL6986 Bagged Canister Vacuum
Belt broke I need to find out how to get in the vacuum to replace the belt but cannot figure it out. I do not have the owners manual for this Eurka The Boss Superlit bagless (402a) please e-mail me any directions if you know how to do it,thanks. [email protected]
How do i change the belt on my eureka the boss lite vacum ... Eureka Boss SuperLite Bagless Upright Vacuum, 405AVacuum
I also have a Hoover upright and I need to replace the electrical cord. I have dimantled the back, where the tools are stored, and the hose. I still cannot find the screws or whatever, to get to the area behind the cord, so I can replace it. I think I will have to take off the bottom too. Has anyone out there tried to do this? It seems crazy. This machine works great so I hope I can also put it back together. Thanks for the help.
Since I do not know your specific model I can only supply you with general instructions. Be aware that most of the time you only need to gain access to the on/off switch to replace the power cord. Also Make sure that you are replacing the existing co ... Vacuums
I have a Kenmore vacum model 11622612200 and it has been working wonderful, however the belt has broken and I cannot get the cover off, I need to look at a manuel to find out how to replace the belt.
... Kenmore Vacuums
I cannot find how to get bottm plate off to replace sweeper belt. where do you change the belt?
There are 3 screws on the top housing, one on the front Right, Front Left and behind the hose in the back ... Eureka Altima Upright Vacuum Model 2996AVS Vacuum
I'm trying to replace the belt that drives the sprayer on my Bissell ProHeat but the package with the belts did not come with instructions. I keep finding instructions on the internet, but without pictures, I have no idea what I'm supposed to do. Please help.
... Bissell ProHeat Turbo Deep Cleaner Upright Steam Vacuum
Trying to replace the belt on my Kirby. I have the plate off but I cannot get the roller brush out..husband and I both tried.
Turn it up where you can see the roller push it in and slide it to the back are the frunt it should come out ... Vacuums
Trying to find the manual to give me the directions on taking unit apart, so I can replace the belt.
Here is the manualwww.thinkvacuums.com/pdf/uprights/Dyson_DC07_Animal.pdfReplacing the belt is a simple process. Flip over the vacuum and youll see 2 clips holding the bottom. Once you do that its pretty straight foward. Consult the ... Dyson DC07 Animal Bagless Upright Cyclonic Vacuum
I am trying to replace the brushbelt. I have the brush off not surewhich end goes where. also I had it on once but the belt was off when it was supposed to on. I cant find my instructions ! help
I am going Kirby "G" crazy.\015\012I hope this URL will be of help to you:\015\012\015\012http://reviews.ebay.com/CHANGING-THE-BELT-ON-A-KIRBY-G3-G4-G5-GSIX-ULTIMATE-G_W0QQugidZ10000000003720039\015\012\015\012If it is of help, please rat ... Kirby Ultimate G Bagged Upright Vacuum
Trying to purchase an Emerson microwave splatter shield replacement part. Cannot find a vendor to purchase from. MODEL #MW8992RD
EMERSON MICROWAVE-IF THE SHIELD (METALLIC CARDBOARD THEY CALL SPLATTER SHIELD) IS BURNT OR HAS BLACK SPOTS THROW THE MICROWAVE AWAY. MY SHIELD CAUGHT ON FIRE. MICROWAVE ONLY 3 YEARS OLD. DON'T BUY EMERSON. ... Vacuums
I was trying to repair my wife's kitchenaid mixer and took part of it apart, including the back part, where the electrical connections are. The original problem was the plastic gear was damaged -- I finally had the good sense to find the solution for that problem on the internet and replaced the damaged part. But now the mixer just won't turn on. I don't think I damaged anything in the electrical section, but I suspect I either blew a fuse or somehow disconnected something.
Do you have a model number? Is the voltage getting to the motor from the switch? ... Vacuums
I am trying to find a replacement belt for EURO PROX VACCUM CLEANER. MODEL #UV209B & PRICE
Hi Helen. Some times the best way to get a new belt is to simply take the old one to a vacuum store and they should be able to match you up with one. Hope this helps, Chris ... Vacuums
Got a sabichi vacuum cleaner the belt has broken and cannot find a replacement anywhere.
I am trying to get replacement parts for the shark ultra steamer, cannot find anywhere. Can anyone please help. Thank you
You can start with this URL\015\012\015\012http://www.vacsewcenter.com/browser.asp?AdvSearch=Shark&gclid=CKrXi5bEyaQCFQf3iAodyVcpEw\015\012\015\012Paul ... Euro-Pro Shark SC-505 Handheld Steam Vacuum
I have a hoover smart 1900 and i am trying to change the belt but can find out to get it to replace broken one.
The casing is secured by 2 screws on the top.near the beater bar take them out to gain access to belt...... ... Hoover Clean Smart Cyclonic Upright Vacuum
I have a eureka the boss smart vac petlover vacuum and I cannot find the book on how to replace the belt. I have opened it up, but there is a silver roller that is confusing me.
Either go directly to the Eureka internet site, or GOOGLE "eureka boss smart pet lover manual". Several options should be displayed to download the needed manual. ... Vacuums
How do i replace belt, i cannot find screws to open up, i have no manual
Hello. The screws are either on the bottom, the part that hits the floor, or under the rubber bumper. Find the screws, remove them and remove the base or cover to expose the belt area. ... Kenmore Progressive Bagless Upright with Inteli-Clean SystemVacuum