Having problems with your Vacuums ?
No water going through my hoover F5857 - Vacuums
Sounds like a clog somewhere. I would check the clean water resorvoir as well as the hose inlets to make sure there is not a foreign object plugging it.
Repair Help & Product Troubleshooting for Vacuums
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
No water going through my hoover F5857 - Vacuums
Sounds like a clog somewhere. I would check the clean water resorvoir as well as the hose inlets to make sure there is not a foreign object plugging it. ... Vacuums
I have the Hoover max Extract 77 and when I'm cleaning the carpet, the clean water tank leaks on the floor, even if I'm not squeezing the trigger. The clean tank doesn't leak when I fill it, but once I place it where it fits and start using the vacuum, the clean water drains out on the floor. The dirty tank fills up, so the suction works, but, I don't know what is going on?
... Hoover Vacuums
Dirty water not going into container - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Make sure filters are clean ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Hoover aquamaster recently purchased hoover aquamaster, trying to shampoo carpet, can't get water to come down tubes, water keeps going into dirty water tank.help!!!!!!!!!!!!!!!
Sounds like you need to attach the air hose\015\012\015\012with reservoir in place you clip on the lid with tubes attached, one of them goes down to the floor cleaning nozzle, the other tube should be about 20cm long with an end piece, ... Vacuums
I have a sta rite (pentair) cristal high rate sand filter model T-200-BP-1....its leaking water thru the top of the valve, where the valve cover screws on the valve body assembly. it leaks water out where they go together around the screws. Also when i vacuum it, everything that i vacuum gets washed back in the pool when its on the filter position. Also the backwash leaks when its turned 2 the filter position, does it supposed to do that?...the only way i have gotten it to stop is to put a seper
Hoover U5344-950 My Hoover vacuum is a nightmare! I have had nothing but problems with it since day 1. The powerhead stops working if you try to lower the handle to vacuum. I took it in to be serviced and was told it sat on the shelf for too long in the store and it warped the belt...so it was replaced. Got it home, it worked the first time I tried it, then went right back to no powerhead working and as a bonus it is giving off a nasty smell like it is going to blow up! It now gets really hot to
... Hoover U5344-900 WidePath Vacuum
Hoover SteamVac Plus 1200 upright hot water extractor Water/carpet cleaner applying o.k. Suction on the "floor" does not work. Suction on the hand tool works somewhat, but water is not collecting in the bucket. There is suction coming from the floor but water is not going into the bucket. It does not appear to be clogged because I can feel with my hand that air is flowing from the floor. The water is not being sucked into the bucket.
... Hoover Vacuums
My Miele vacuum cleaner has the red triangle light on and keeps switching on and off. Is it broken? have been hoovering upstairs and I noticed the hoover had the red triangle light on. I changed the hoover bag but it still kept going on and off. Is this an overheating problem or is the hoover on the way out?
... Miele Vacuums
High pitch My Hoover fusion vacuum cleaner began making a high pitch sound that makes it very annoying to vacuum. I cleaned all the things I could clean. I even cut out all the hair that was entangled in the brushes. Any idea what is causing the sound. It sounds like an siren is going off.
The Hoover Fusion has design flaws in the motor, including a metal plate that is too thin to contain the forces acting on the motor, particularly the constant strong tension from the drive belt, and a plastic plate that is attached to the metal plate ... Hoover Fusion Plus Cyclonic Upright Vacuum Vacuum
Hoover core vacuum cleaner. My son has vacuumed water into machine. will this ruin it
Allow it to dry dry for sometime , clean all the filter after keeping it open, then run it open without any attachments , the bag or the filter till all traces of water/moisture goes off. I dont think there will much of problem unless it has gone int ... Hoover Vacuums
My shampooer won't pick up the water - Hoover F6213-900 SteamVac Agility TurboPOWER Steam Vacuum Vacuum
... Hoover F6213-900 SteamVac Agility TurboPOWER Steam Vacuum Vacuum
Shampooer instructions..... I have a Kirby Generation 3 with the shampooer. it has been awhile since i have used it and i sort of remember how to attach it but i was wondering this vacuum has a tray and i assume it is for sucking up the dirty water but when i went to use it no dirty water was going into the tray.....help what did i do wrong......thank you for your time...............spanny
Try this link....http://reviews.ebay.com/KIRBY-CARPET-SHAMPOOER-INSTRUCTIONS-MANUAL-DIRECTI ... Kirby Generation 3 Bagged Upright Vacuum
Power nozzle of my S3670 does not work (vacuum itself does work), the headlight bulb in the nozzle is broken. This happened in the past several times - we would bring the vacuum to service center - I don't know what they did other than replacing the bulb. I decided to go to ACE and buy replacement bulb myself, replaced the one in the nozzle - this did not fix the problem. I don't see any fuzes or anything in the nozzle. However, the manuals says to "Use only HOOVER part no. 27317307, which is a
... Hoover S3670 Bagged Canister Vacuum
Hoover vacuum turned off and wont go back on - Vacuums
Generic problem for all Vacuums\015\012Hoover vacuum turned off and\015\012Hoover vacuum turned off and won’t go back on\015\012 ... Vacuums
Hoover carpet cleaner not picking up water - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Assure the ring gasket is in place under the hood. A round rubber gasket must be in place on the round tube under the hood where the recovery tank sits to connect the vacuum from the motor to the round tube on the bottom of the tank. ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
My hoover steam vac is not sucking up water - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Machine will not vacuum up the water - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Could be a few thingsLook for suction at the head. Turn it on and cover the opening with your hand. You should feel suction. If not something is plugging it or one of the following. You can usually see a clog as the cover is c ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
My vacuum died. It won't turn on. It is not the outlet. Is it a blown fuse? How do I replace the fuse? Where does it go? This vacuum is a little over 2 years old. My older Hoover WindTunnel STILL works and has never had this problem.
It's probably the power switch. My switch was dicey for a couple years, finally gave out. Easy to replace.\015\012\015\012Remove the two screws just above the WARNING on the rear of the upper handle assembly, then slide the whole assemb ... Hoover U6476-910 WindTunnel Upright Vacuum Cleaner Bagged Vacuum
Hoover Vacuum My Hoover cannister model s3614 "runabout powermax" suddenly lost power to the agitator roller in the rug brush. Where the wire cord enters the power brush, the covering has rubbed off exposing the wires which are not bare but still have their own covering. For a while the power came and went as I manipulated the wires but finally died. Is this something I can fix myself or is it going to be an expensive professional repair? (Warrantee has elapsed.) Thanks.
Our Hoover upright vacuum cleaner makes a very loud noise when it is running. What causes this? ... Hoover S3614 Vacuum
Suction Problem I just borrowed the Hoover Steam Vac Deluxe w/ 5 brush agitator from my neighbor and it worked ok for the first few minutes, although the suction would stop and go. When I had enough water to dump I did it and when I put it back on it no longer sucked the water up from the carpet. She admits to having it for 15 years, but why did it have to break on me. Makes me look as though I did it!
Check and make sure the dirt water tank is properly on if it it is chech inside the lide to make sure the red stopper is not stuck to the top this will cut off the suction ... Hoover F7431-900 SteamVac Vacuum
Dirty water not returning in hoover steamvac - Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Recovery lid not on correctly ... Hoover SteamVac Carpet/Upholstery Deep Cleaner Vacuum
Hoover Floormate--Does not pick up water. - Hoover Floormate H3000 Upright Wet/Dry Vacuum
First make sure that you are getting suction from the bottom of he machine. Most of the time the squeegee is worn out which does not allow it to pick up the water like it use to. Turn over the machine and inspect \015\012the squeegee. If it looks ... Hoover Floormate H3000 Upright Wet/Dry Vacuum
Hoover steamvac dumping water - Hoover Steamvac F5860-900 Vacuum
Take out the tank and emty it ... Hoover Steamvac F5860-900 Vacuum
I love my hoover F5912-900 scrubber however it has stopped sucking up the water. Is there a place that it could be blocked with dog hair or other dirt?It blows out air, but does not **** up the dirty water. How would I go about unclogging it?
Hi Shirley. Im afraid I do not have a solution for you rather I have the same problem.exactly it only blows..My machine is brand new I was using it for the 2nd time only......i also cannot find anywhere to unclog this thing....I even took the front p ... Hoover F5912-900 Upright Steam Vacuum
My hoover floormate will not dispense water - Hoover Floormate H3000 Upright Wet/Dry Vacuum
... Hoover Floormate H3000 Upright Wet/Dry Vacuum